Etapa de prefloracion.

Hair been watering and now it's harvest time. Two of the three phenos are super frosty #1 and #2 both more kushy , sweet gassy american OG taste. The third is a lot sweeter. The Mac x pp is blackberry x shoreline aroma.

Pistols are showing more and more everyday. Clawing is going away The leaves are a little less dark green, going lighter. Fed the 1st bloom feed today.

Flowering Day 19 Since time chance To 12 / 12 h . Hey guys :-) She grows great . Today everything below was cleaned and defoliated :-) . A lot was removed because this time it was quite cramped in the tent and you don't lose your energy in the lowest shoots :-) . This week it was poured twice with 1.2 l each. You flowers are developing beautifully 💚 Everything was checked and it looks like all trips are slowly but surely gone :-) have fun and stay healthy 🙏🏻💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Greenhouse seeds Company Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

My first try

This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Čeeeeest Jak je ? U mne je 6 ty tyden za námi a ja koukám jak to hezky roste. Poslední holka šla do květu až v polovině týdne. Vypadá typově jako sativa tak uvidíme jaký bude rozdíl. Holky sem tam ostříhám plachťáky a vrchní listy ať jde světlo hezky dolů. Ve skleníku si F1 chrochtá a už tam má i bandu malých špuntů. Přitápím tam a ve středu možná zakryju textilkou . Šišky se zvětšují ,vše mi klape tak snad to tak i vydrží . Přeji úspěšný Groove bando 🤝💪🙏

Einen wunderschönen guten Tag, liebe Grow-Community, und herzlich willkommen zur 14. Woche meines kleinen Outdoorprojekts! Diese letzte Woche ging es den Damen an den Kragen … Da die Kleinen in letzter Zeit doch ordentlich an Pflanzenmasse zugelegt hatten und das Wetter in Kombination mit zu dichtem Blattwerk ein erhöhtes Pilzrisiko birgt, habe ich mir die Schere geschnappt und die Pflänzchen ordentlich ausgedünnt. Ich bin hierbei relativ radikal vorgegangen (nach dem Prinzip „Viel hilft viel“). Das hat mehrere Gründe: Einerseits bin ich kein Fan von diesen ganzen Popcornnug-Geschichten (sowohl qualitativ als auch vom Trimaufwand her). Ich stelle die Qualität immer über die Quantität und so gewährleiste ich, dass die Haupttriebe die gesamte Energie erhalten und optimal performen können. Des Weiteren gewährte ich so eine deutlich bessere Luftzirkulation und vermeide ein unnötiges Überlappen der Blätter, welche wiederum Kondenswasser einfangen und somit ein optimales Klima für Pathogene bilden. Und last but not least darf ich ja eh nur meine 50 g/Person ernten.😇 Beim sogenannten „Lollipopping“ verwende ich eine frisch sterilisierte Schere, welche ich nach jeder Pflanze neu reinige, um eine mögliche Kreuzkontaminierung zu vermeiden. Vor diesem Eingriff habe ich den Pflanzen noch eine Stärkung verabreicht, um sie auf den kommenden abiotischen Stress (nicht durch Lebewesen erzeugter Stress) vorzubereiten. Hier kam wieder mein noch nicht so altbewährter Biostimulator ins Spiel. Dieses Mal allerdings in Kombination mit einem Komposttee. Dieser hat den Vorteil, dass er den Gasaustausch der Pflanze fördert (,,ein lebenswichtiger Prozess, bei dem Sauerstoff (O₂), Kohlenstoffdioxid (CO₂) und Wasserdampf mit der Umgebung ausgetauscht werden“), indem sich die Mikroorganismen um die Spaltöffnung (Stomata) ansiedeln und diese sich schneller öffnet und schließt. Wichtig ist hierbei noch zu erwähnen, dass sich die meisten Stomata auf der Blattunterseite befinden, diese also ebenfalls besprüht werden sollte. Und da wir Bakterien ausbringen, ist es von Bedeutung, mit großen Tropfen und wenig Druck zu arbeiten und die Pflanze möglichst nass zu machen. Jetzt hoffe ich nur noch, dass das Wetter wieder mitspielt und wir gesund und vital in die Blüte übergehen können. Und zum Schluss noch das altgewohnte Gequengel: Grow Diaries hat mir aus irgendwelchen Gründen meine Views gedrittelt (vielleicht wegen der Kritik im letzten Bericht)😁. Bisschen ärgerlich, aber ich mache es ja nicht für den Fame.😂 Das war’s für diese Woche. Euch noch einen schönen Restsonntag. Peace

una fioritura bestiale, i tricomi sono fuori scala penso che si potrebbe lavare anche al 9%, sara un ottima prescelta per le estrazioni!!! non vedo l'ora!

Flushing straight RO water not phed. I run 2 weeks of flushing so these girls will be done in less than 2 weeks. The purple has reallly started to show since the flush started and I dropped the temps to 70 -65 day and 58-62 nights dropped the reservoir temp to 60.

No issues at all with these 3 girls!!! They look amazing!!

bottom feeding

Overall happy with this solo cup grow, wish I could have got a little more but I ended with 6.3 grams dry weight, bud looks amazing. Post more of a update after I smoke it in a few days! Thanks for following & happy growing friends!

Day 42 Ph run off is back in range 6.3-6.5 getting some slight nute burn tips I am assuming due to nutrients actually being available now haha next feed will cut 1 gram of nutrient powder see how she responds

Semaine impeccable plante robuste consomme beaucoup. 3 irrigations par semaine, 1/3 avec engrais.

Hello this is the end of week 6 and the beginning of week 7 of flowering. Still 4 weeks to go, and we are getting some color on these plants. 3 plants are showing some purple. Man, these plants smell good now. When they were young I was getting very little smell on my fingers with the rub test. But now, these plants smell wonderful. They have cookie and cake parents. So it smells like some sort of sweet treat in here. The seed description says, Sweet, creamy, vanilla, desert with a touch of butter and fruit cake. Sounds delicious. 😃 Have Fun. Chuck.

They were both putting on weight. The one you see by itself with the Phlizon light was always on 16/8 but the other plant had to be on 12/12 because it was in a tent with a photoperiod plant (white widow which I almost posting). The phlizon light seems to produce more nutrient burn even tho it is lower wattage. I think it's too close but at this point the buds were looking pretty good. Reduced cal-mag supplement.