Day 2 Days starting at zero for the first true leaves.

Day 44 - Put em in flower/bloom... 12/12... they are drinking alot..... Day 47 - Decided to thin them out and defoliate ........ pics/vids....... (video are big files, need to pause, let em buffer) Day 48 - Posted a pic, day after defoliation. Day 50 - more pics, recovered from defoliation, and some pics of the beginnings of the flowering....... something interesting in the day 50 pics , is the color of the light spectrum...... it looks like a yellowy sunlight spectrum..... home made DIY LED..... 😎 Globe setup is working better, 10x click- 9w - 2700k - 8000 Lm 2x osram- 10.5w - 6400k - 2160 Lm Lightpanel- 70w (600w) - 20x blue 6400k (2000Lm) - 38x red 2700k (4000 Lm)

Hey everyone . This week we switched from Canna Vega A + B to Canna Flores A + B, because she is starting to put her energy into flower formation ☺️. Furthermore, I keep her EC value at 1.6, as it has done her very well so far 😎✌️🏼. You also stretched very well again. The network is also fully filled out as it should be. I wish you lots of fun with the update, stay healthy 🙏🏻, and let it grow 😃👍. You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.5 - 5.8 💦 💧

It's week four of flower, and my humidifier is busted. I can't afford to replace it right now so she's stressing. And by she I mean the two clones and then I popped the mom in the same pot due to space constraints. They seem to be doing well despite the dead of winter in Michigan humidity.

Plant is growing fast now. The hot days are back, but we are still going strong.

She’s getting bigger!

Going into this week on the 12/12 light schedule. It grew to about 10.5 inches from the light. The light is now up to 50% brightness. A full dose of bud candy was added, instead of the half added last week.

Day 108 smelly and sticky but Buds have not hardened I bought an extra light and added aluminum foil just to see if any change, still spraying nutrients on (.5,1,1) and 10 ice cubes around the top and bottom pots

Pics show 1.5 weeks from last post. Really wish I could flip her into flower but still can't. I think she is begging to be flipped. So many pre-flowers. Wonder if pre-flowers in Vegg can get pollinated? This thing might get too big before I can flip. Still growing so fast. Probably because I'm focusing all growth to the mainlined stems. Which are so tall now. Most all leaves are dark. Going to start backing off the nitrogen (FF Grow Big) Also seeing tip burn, as well as edge burn on the leaves. Definitely over feed. The soil is probably caked with salt by now. Stress techniques - - Still super cropping all nodes every other day. See image on how big some of these knots get. All stems are super thick and hefty. Which was a goal of mine. - Defoliation every other day. Taking leaves and new nodes off. Definitely think doing this almost every day is the worst stress its dealing with. - Branch squeezing/tie down. Still noticing heavy scaring or buildup where I have it tied down at the base. Will keep it there to keep seeing what happens. All stems/branches around it have hardened. Also noticing red/purple streaks in areas. Wouldn't say it's the healthiest plant but it sure is a sturdy fast growing one.

Time lapse

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

This week I Realised I'd used the wrong feed chart so I was over feeding 🙄 the leaves burnt on a few plants so I've only fed them water this week and will resume feeding from next week. There are still no pre sex pistils showing but it can't be far off now. As soon as pistils start to show I'll start feeding bloom feed. I've turned the light up to 30000lux using HLG's online calculator for converting a lux meter/app reading to PAR , my light is 3000k which with lm301H Led's works out @ 465ppfd which is about the max the plants can use in veg without supliments co2. Here's the link for anyone using quantum boards, it has different spectrum calculators. It's been really useful setting my light up so big thank you to HLG (even though I have a Geeklight) and a thank you to the GML show on YouTube for bringing it to growers attention (I love that weekly show, so much info and perspective) https://horticulturelightinggroup.com/blogs/calculators/converting-lux-to-ppfd Hope everyone's staying safe and growing 😎

Introducing bloom nutrients to her now, going to do a partial flush on the tank itself. I refill with RO water thats pH adjusted. I only use her nutrient solution for watering from the top a few times a day but not enough to cause significant runoff into the tank .

Loved growing. Definitely one of the best buds i have smoked. Trimming was enjoyable.

COMMENTED BY MadeInGermany MadeInGermany 6 minutes ago Flowering day 65 since clock change to 12/12 Hey guys :-) . It's so far, the lady is ripe and will be cut at the bottom end in the coming days and hung upside down in the drying tent :-) . Next week there will be an extra update on how they are hanging. Watering would be done twice this week with 1 l each (nutrients see table above) Otherwise it was checked and everything was cleaned. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Welcome Back!💚 Nach der dritten Woche entwickelt sich die Peach Frosting im Vergleich zu den anderen Pflanzen etwas langsamer und ist in etwa gleich auf mit der GG#4. Auch bei ihr warte ich definitiv mit dem topping, evtl. Bis sie in das Große Zelt umgezogen sind und individueller auf die unterschiedlichen Wachstumsbedingungen der Pflanzen einzugehen. Die Umgebungsgegebenheiten sind weiterhin optimal: ————— 🌞 Temp: 24°C bis 26°C 🌚 Temp: 18°C bis 19°C 💨 RH: 68% VPD: 0,7 kPa👍 ————— Grüne Grüße 🥦

First week went perfect plants sprouted right on time and reacted really well to transplant

welcome back brother its week 3 and they look perfect =) they are now between 22-27 cm high which means it is time to flip them flower period starts at 04.02 see you next week