Jan 23 Doing great, lookin about 70% cloudy 20 - 25% clear, and little amber, flush prolly next week!!

COMING SOON!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Dried and now in Curing

7.4. - Watered 💧 9.4. - I'm so dumb...wires were too tight for the main stems and it got cut in. I've carefully removed them, but I did not give enough time to recover and continued bending. Result - 2 half-broken stems (thankfully healthy and growing further) and 1 completely broken off main stem. Watered 💧 10.4. - I guess I must be very lucky this run or the genetics are really good. All plants are thriving and gaining new growth each day, leaves are so big that I am quickly loosing any free space. First buds sites are slowly starting to form, so I will defoliate a bit. I've also manged to bend the main stem on Jack once again as it is definitely the biggest of my plants. Thankfully, without any injuries. 😎 11.4. - Watered 💧 6.4. - 12.4.2024

Seeing burned tips makes me feed it differently, 2 days with fulls set of nutrients, 2 days with Cannazym only. I pruned them a bit more, not sure if it was a good idea but those little branches didn't develop a lot during this time. On day 4 of the week, after HSO's comment on a weekly report, I've measured runoff and it was insane! 3k-5k ppm Flushed them all so that runoff was around 800 ppm, and watered them with Cannazym only (PH around 6.1, EC 440 ppm). Also moved them around a bit Most likely the reason for conductivity going so high was that I removed the pots from platforms at some point and old runoff was probably soaking in.

Seeds directly In coco jiffy Bruce banner seed spend more time then other 2 to get out...

She has become a beautiful little bush full of fat dense nuggets completely covered in fruity and sweet resin glands with some purple no tones in the buds. Love It!

You walk into the back yard and it’s a straight face punch of smells. Looking like some indoor rn moved all plants to safer place in case storm hits so now I atleast have a wind break

The amount of harvest was good even though I lost basically one whole plant to the meldew. So the harvest would have even been double.. But yeah I can not complain about the quantity. I will see how the smoke test goes 💪

Day 77) 12/9 End of another week. Phone is fixed and pics are back. Day 74,75,76 there were no pics due to f'ked up phone but day 77 now has pics. This girl is doing well and still growing taller but I can tell she's at the end of her stretch. Flowers are smelling very sweet like berry and a hint of pine and candy and just sticky as hell. Buds are elongating up and down the stem with a nice 12-15 inch length but buds are forming and fattening slowly, could be the sativa side of her. Still drinking a gallon a water 💦 a day with nutes. Daily temps and humidity fluctuations may be a cause of slow bud growth and it may be my fault for trying too hard to keep environment inside tent and outside tent to the exact same but in reality according to natural science and popular findings it's evident that a swing in these conditions of not much more than 10 degrees/percent is expected between light and dark (silly me!) So I will let nature take its course but will be very watchful. Hope u all are still watching and taking a peek now and again. Happy Growing and Happy Harvesting

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 12/01/2020 - Fed her 1.5l of 6.6PH water with 0,2ml of each: Cal Mag (Atami), Grow, Bloom and Max, and 0,5ml of each: Heaven, Alga-mic and Vera, noticed some run off, I use about 1/4 of the nutrient dosage on the chart, to achieve about 100/150PPM (500 scale). Now using the perfect PPM worsheet made by Grow Boss.

👍 👍 👍

7th of May Day 59 day 11 of 12/12 4 plants are looking healthy the stretch has started and and the canopy is starting to get a bit dense I may rom I’ve some large fan leaves on day 14 of 12/12 to give better airflow and allow for the lower growth to get more light, I can picture the colas already 😁🍁 ppm still going in at 650 ph 6.5, i top dressed each plant with fish blood and bone mean 3 table spoons to each 3gal pot on day 1 of flower

Graduated, and am off from work for a few weeks, so went overboard on photos. Plant is doing well, leaves are starting to turn yellow (strain trait). Can't wait for the harvest and being able legally gift my xmas ornaments to my cousins during our "cousins walk" at our family xmas party.

28/10/2025 17:30 11.3°C 60% RH Time changed to 1 hour back during the last weekend so it's dark outside and i cannot go there before,also it Is fucking cold outside all of a sudden after some warm days We are at the very end of october and these plants looks awesome especially Coco fresh Coco Milk seems to have put a bit of weight so i decided to let her go another 3 days because the moon will be more than a half which Is pretty good

Day 21 - Ladies are looking nice & healthy! Everything seems to be going great, one is still growing a little slow but all in all extremely happy with this grow so far! Thanks for following & happy growing friends!✌️🏼🌱 Day 22 - They are really starting to take off now😍😍 Day 23 - not sure if it’s the pheno type or the nutrient but the plant that is getting the Technaflora Nutrients is starting to get a little bigger🤷‍♂️🏼 Day 24 - Babies are really starting to take off😍😍 got my New420GuySeed gear in today as well👍🏼🙏🏼 Day 25 - Starting to really grow now, the smaller of the 3 I starting mainlining today to do another comparison at harvest time! Day 26 - Another good day of growth! Thank you for following & happy growing friends!🌱✌️🏼 Day 27 - End of the week & these ladies just keep looking better & better😍

So this was a simple going grow!!! It’s strange how the hot so big under the light! I had one blue cheese under the same light and tent and it was way smaller!! Anyway 1 of these has come out perfect very happy the other two I’m not to sure the hairs were still pointing up but I really don’t have the time to have them going another week there already over the time they was supposed to be done but yeah I’d say out of 10 I’d rate this blue cheese growing experience a 6 out of 10 hopefully this improves when it’s dry!!!

Day 2 - LST and topping/mainlining where possible before flowering Both plants have broad leaves blocking light to the canopy

Sieht aus als würden sie von Tag zu Tag anschwellen die Süßen. Jetzt wo die Regenzeit mit hoher Luftfeuchtigkeit anfängt habe ich mir einen Luftentfeuchter zugelegt. Weiß nicht ob es übervorsichtig ist, den schon anzumachen. Doch bei einigen Growmies gab es schon Schimmel in der Ernte. Ich versuche die Luftfeuchte den Rest des Grows unter 50% zu halten