Likes
Comments
Share
Likes
25
Share
Ghost Train Haze — Harvest / Trim / Cure Part 2 — Trimming, Resin & First Cure First of all, once again, sorry for dividing this harvest into three different parts. But honestly… there was just no way to fit this entire experience into one single update without rushing it. This run became something special for us. So instead of throwing everything into one giant report, we wanted to slow things down and give each phase the attention it deserves. Part 1 was about harvest day itself — especially the frozen plant and the preparation for the future ice water hash runs. Now in Part 2, we focus on the monster of the room. The big Ghost Train Haze girl. The giant. And damn… she was beautiful. ⸻ The Giant Finally Ready After drying slowly and patiently, she finally reached that moment every grower waits for: the stem click. Not bending anymore. Not soft anymore. That perfect dry snap telling us she was finally ready for trimming. And honestly, seeing this massive plant hanging there fully dried was already rewarding by itself. Huge flowers. Dense structure. Long spears everywhere. Frost absolutely covering the plant from top to bottom. At this point, we brought out the Trim Bin, got comfortable, and of course… Mr. Baggy joined the session too. Because trimming alone is trimming. But trimming with the homies becomes part of the memory. ⸻ Trimming This Beast Once we started separating the branches and working through the flowers properly, one thing became immediately obvious: This plant was ridiculously frosty. And I mean ridiculously. Possibly the frostiest plant in the entire room. Every touch released resin. Every nug felt sticky. Scissors getting glued together constantly. Gloves turning darker and shinier minute after minute. The flowers themselves came out incredibly dense and compact too. Heavy in the hand. Proper weight to them. Not airy at all despite the sativa influence from Ghost Train Haze. And visually? Beautiful. Silver-covered calyxes. Orange hairs fading perfectly into the resin layer. Chunky flowers with that classic “don’t squeeze too hard or you’ll ruin the trichomes” feeling. This girl truly felt like a reward after the full cycle. ⸻ The Trim Bin Surprise One thing we absolutely loved during this trimming session was watching how much resin naturally collected inside the Trim Bin. By the end of the session, the amount of loose trichome heads sitting underneath the screen was honestly crazy. No dry sift machine. No mechanical shaker. Just trimming. And still… A beautiful golden layer of resin waiting for us underneath. Of course, finger hash also started building up naturally while trimming. Sticky gloves. Sticky fingers. Sticky scissors. The classic signs of a happy trimming session. Then came one of our favorite moments of the day. ⸻ Playing The Drums — Moroccan Style At the end, we decided to have some fun with the trim itself. Using the dry material almost like traditional Moroccan drum-sifting techniques, we gently worked the trim leaves and remaining material to knock off even more trichomes. Simple. Relaxed. Traditional-inspired. And honestly? It worked beautifully. What we collected afterward turned into a gorgeous little hash bar that looked and smelled incredible. We didn’t even bother weighing it. Sometimes not everything needs numbers. Some things are simply for the experience. For the ritual. For the future session. For curiosity. For enjoyment. And this one definitely earned its place for later tasting sessions. ⸻ Final Dry Weight After everything was trimmed, cleaned, and separated, the final dry flower weight from this single plant came to: 294.9 grams dry Honestly? We’re extremely happy with that. Almost 300 grams from a single plant in this run is something we can absolutely appreciate. Especially considering this entire project was: * 12/12 from seed * Minimal training * Minimal intervention * Natural structure * Mostly observation and guidance Just letting the plant express herself while giving her the right environment. And she rewarded us massively. ⸻ Storage & Cure — Different Approaches Once trimming was done, we started organizing the curing process using different storage methods. This time we decided to split the flower between: * Glass jars * Metal Zamnesia containers * Grove Bags Each one has its own purpose and philosophy. Glass Jars The classic. Simple, reliable, proven for decades. Perfect for manual burping and personally controlling the curing environment yourself. They also allow us to visually inspect the flowers easily during cure. ⸻ Metal Containers The Zamnesia metal containers feel more protective physically and also help reduce light exposure completely. They feel solid. Clean. Almost laboratory-like. A very nice option for preserving flower while keeping things discreet and protected. ⸻ Grove Bags These are probably the most modern approach we tested in this run. The idea behind Grove Bags is that their “TerpLoc” technology supposedly regulates humidity internally while allowing gas exchange in a controlled way. The theory is that they naturally maintain flower within the ideal curing range around: 58–62% RH without constant burping. So now we’re extremely curious to compare all three methods later during the smoke review phase: * Does one preserve terpenes better? * Does one keep the flower softer? * Does aroma evolve differently? * Does cure quality actually change? We’ll definitely revisit this in Part 3. ⸻ The Frozen Plant — Flower Comparison After finishing the main giant plant, we also trimmed and cured the material that came from the frozen/hash-focused plant from Part 1. This was important for us because we wanted to compare: * Flower from the “normal dried” plant vs * Flower from the plant intended mainly for extraction And surprisingly? The terpene profiles feel extremely similar. Same family. Same identity. Same Ghost Train Haze soul. Maybe slight differences in intensity or texture, but overall the profile remained very recognizable between both plants. Which honestly gives us a very good feeling about the future hash quality too. The frozen plant itself ended up giving: 58.5 grams dry Plus whatever was already separated and reserved through the frozen material process itself. So overall, absolutely worth it. ⸻ Macro Photography & Focus Stacking During all this, we also continued working on our macro photography experiments. Some of the photos shared in this update were actually focus-stacked images made from: * 112 photos * 96 photos * 33 photos For people unfamiliar with focus stacking: Macro photography has extremely shallow depth of field. When you photograph trichomes closely, only tiny portions stay in focus at once. So instead, we take dozens — sometimes over a hundred — separate images with different focus points and merge them together afterward in software. The result is a final image where the entire flower or trichome field becomes sharp at the same time. It takes time. It takes patience. But honestly, we love the process. Because cannabis truly deserves to be appreciated up close. ⸻ Trimming Timelapses We also recorded trimming timelapses so people can better see the workflow behind everything. Not just the glamorous final nug shots. But the actual process: * separating branches * cleaning flowers * resin building up * trim collecting * the mess * the rhythm * the work itself Because behind every beautiful cured flower, there are hours of patience nobody usually sees. ⸻ What Comes Next — Part 3 The next and final report will focus on: * Full smoke review * Cure evolution * Drying process explained deeper * Flavor profile * Terpene expression * Effects * Overall experience with Ghost Train Haze * Personal reflections after living with this cultivar That final report will close the entire Ghost Train Haze journey properly. ⸻ Thank You And as always… Huge thanks to everybody who stopped by this journey. To the breeders behind these genetics. To the companies making nutrients, LEDs, gear, and tools possible. To the platforms that allow growers to share their passion openly. To the community members constantly supporting each other. To the OG followers. To the new followers. To the silent viewers. To the growers. To the curious people. To the skeptics. To the lovers. To the haters too. If this grow made somebody stop scrolling for even a few seconds and appreciate the plant differently… that already means something to us. From grower to growers. See you all in Part 3. 📡 DELETED @ 1K Please stay tuned.we never quit https://www.youtube.com/@TheDogDoctorOfficial NEW 🙏 Thank you for your patience and continued support. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74
Likes
25
Share
@Kakui
Follow
Veg22, riego con 3.0 EC y pH 5.9, drenaje promedio de 5.8 pH y 2.6 EC(muy bien), primer riego con Sensizym para limpiar un poco las raíces, y este será el último riego de vegetación con Voodoo Juice, Tarantula y Piranha. Se hizo una pequeña defoliación de las hojas abanico más bajas y se volvió a ajustar el LST, ya van tomando la forma final. Veg23, creciendo bien. Veg24, se mide la temperatura de las hojas 22°C y se compara con la temperatura del indoor 23°C, con una humedad de 50% RH, la calculadora arroja un valor de VPD=1.24 kpa, lo que está dentro del rango óptimo. Veg25, hoy toca una pequeña defoliación y probaré también hacer un último apical en 2 o 3 plantas a modo de prueba. Al final, tomé un gran riesgo, y hice varios apicales extra y una defoliación más grande de lo que tenía en mente, tengo fe que resultará bien 😎👌 Veg27, riego con 0.8 EC y pH 6.0, drenaje de 6.0 pH y EC 2.0, se están alimentando y creciendo bien, quedan casi 2 semanas para pasar el fotoperiodo a 12/12, espero que crezcan suficiente para esa fecha. Veg28, un par de hojas de 2 plantas presentan mordidas tipo oruga, revise y no encontré nada, aplique spray insecticida, espero no siga pasando. A parte de eso siguen creciendo bien, quedan un poco más de 10 días para el paso a 12/12.
Likes
53
Share
@Rob96
Follow
Overall I would say really successful first crop 1 plant 71.36g and I've smoked about a q the last couple of days before weighing as I ran out😂🤣 also considering I had to cut the biggest cola due to rot and a couple others medium snips I'd say really nice yield, looking really nice, smells amazing, does need a little cure to get the taste there a little more is a little harsh but not too bad at all, had fun growing this, just ordered 3 seeds of barneys runtz muffin and got a free wedding cake so that's me sorted for round 2 will be back soon, still got the strawberry amnesia to finish drying, 3rd day in so far so will be uploading that once done, hope anyone following or even glancing through has enjoyed viewing :)
Likes
38
Share
February 2, 2021 (Week 4, Day 29): The plants grew enough overnight to top at the third node. This is the second and last time I'll be topping these plants - this is the Nebula method of manifolding. I also took off the second node of each growth stem as well as the original fan leaves. I've pressed them in my plant press to save the memories of my experience with my first grow. I also redid the LST on every plant. The new growth sites I've pinned to the fan leaves. I really enjoy doing LST, it's quite therapeutic to figure out just how to support the plant without harming it. I think I am getting great lateral growth so far. The main growth stems are swelling a lot at the bases. Medium is still wet from yesterday - lightly tilled about a half inch of top soil. I've turned down the humidity another 5% this week. I'll keep it there most likely until I start the flowering cycle. Averaging 60% rH and 78℉. Plants are happy, and I am happy. 😸 February 3, 2021 (Week 4, Day 30): Plants are looking good this morning. The nitrogen toxicity in Unknown 2 is beginning to subside. Now Unknown 1 seems to be having a nitrogen toxicity as well - slight leaf curling at the ends with a very lush and dark green color. I am assuming this soil is still very hot. As I've lowered the humidity I suspect more nutrients are being sucked in through the roots instead of transpiration through the leaves. I think the plants are going to take a little bit to get used to the hot soil, but I bet once they do they'll be as happy as ever. Medium is still slightly moist this morning, no watering. I tilled a half inch of top soil again to keep everything aerated. Most likely will water tomorrow or the next day. My LST seems to be holding nicely. I tied down Unknown 2's first growth tips as the fan leaves have finally straightened out after the topping yesterday. New growth tips are emerging nicely from the third node of each lateral stem. Averaging 60% rH and 77℉. Nothing else to report for today. February 4, 2021 (Week 4, Day 31) : Growth looks good overnight. I think this second topping is confusing the plants a bit. Lots of bulking of the stems, but not much lateral growth. I have a feeling they'll take off over the next few days. They're still growing really well. I posted a grow question last night having to do with little white bead-like structures growing on the surfaces of the leaves on every plant. I was concerned it may be a mold or fungus starting to grow. I did a bunch of research and it seems to be early trichome development called "sessile glands". I still have the question open and I am trying to get confirmation. Really hoping if they're trichomes that's a good sign that these plants are going to be frosty. I uploaded some pictures to show the development. Over night they started to grow everywhere on the leaves - hopefully they really are just trichomes and I am being over-vigilant. Better safe than sorry. I watered the plants today without nutrients; 3 liters per plant pH'd to 5.8. Runoff sitting at ~6.5 pH now which is much better. I'll continue to run 5.8 pH solution until I see the pH of the soil come down to at least 6.2-6.3. Tomorrow I'll most likely have to defoliate a bit and tie down the second sets of growth stems, as they're beginning to stretch and grow vertically. Averaging 60% rH and 76℉. Happy growing all! 😸 February 5, 2021 (Week 4, Day 32): The plants are exploding with growth now. I defoliated the fan leaves from the first node on every plant and tied down the growth stem for lateral growth. These plants are meaty as hell. The stems are thickening really quickly and I am getting tons of foliage and stem growth. The third nodes are starting to come around. I think I figured out the "mold" issue I thought was starting. They're definitely trichomes, not mold. I touched the leaves that were sparkling and my fingertips got sticky, oily, and reeked of weed - so that's great news. The smell in my grow room is getting stronger every day. While defoliating this morning I found my first pre-flowers on Gelato 1! It looks like all the plants are female, but Gelato 1 threw some pretty pistils at me to get my attention. Seems like the plants are reaching maturity. Depending on growth over the next few weeks it may be time to switch to flower soon! I am aiming for about 16" in veg before switching. Seeing these pre-flowers made me so anxious for flowering. Unknown 1 and Unknown 2 are doing great as well - all the signs of the nitrogen toxicity have subsided. Unknown 2 has more trichomes on the leaves than any of the other plants, and its foliage is a beautiful deep green. They are either different phenotypes or different strains entirely as the two of them are growing and looking quite different. Unknown 1 is much lankier so I suspect a different strain. Unknown 2 is especially squat and I suspect it's 100% indica or close to it. Medium is still wet. Averaging 60% rH and 77℉. No other news today. February 6, 2021 (Week 4, Day 33): Last 24 hours I have seen at least an inch of lateral growth per growth stem on each plant. These girls are absolutely loving life from the looks of it, they're growing incredibly fast. I redid a bunch of LST today. Had to move every tie up one node. Medium is still moist. Lightly tilled half inch of top soil. Gelato 1 is shooting out more pre-flowers. Thanks to my wife we have new friends that have joined us in the smart pots. 😸 Averaging 60% rH and 75℉. Happy weekend everyone! February 7, 2021 (Week 4, Day 34): These girls are chugging right along. Tons of great lateral growth every 24 hours at this point. Having to adjust LST pretty much every morning to accommodate for the crazy growth. Gelato 1 is a freak of nature - the fan leaves are gigantic. Defoliated again today; took the fan leaves from the third node of each plant. Will be defoliating the first node of the secondary growth stems tomorrow most likely. Medium is slightly moist. Tilled the soil again. Will be watering tomorrow morning most likely. There's still a little dropping at the ends of the leaves so I will hold off on nutrients until all nitrogen toxicity has subsided. Averaging 60% rH and 77℉. Nothing else for today. February 8, 2021 (Week 4, Day 35): Watered today with 3 liters of 5.8 pH filtered water per plant (no nutrients) - runoff around ~6.7-6.8 pH. Will most likely resume nutrients upon next feeding depending on how the plants look. Defoliated entire first node from center four growth stems and tied down third nodes. Readjusted outside LST. The plants are almost to the outside of the pot which is when I'll switch to vertical growth. Unknown 1 is very close to being let loose, it's also pre-flowering now. Gelato 1 is now covered in pre-flowers - it's definitely a happy plant. Unknown 2 is still the runt of the group but also appears to be almost 100% indica by how stout it is. It's showing sex but no pistils yet. All three plants seem to responding well to mainlining and the stress isn't making them skip a beat. Stems are getting huge. I downloaded an app on my phone to check how well my lights are doing and, if the readings are accurate, I am very impressed with these lights. I've read cannabis can handle around ~65 DLI, so I am right where I need to be. Averaging 60% rH and 78℉. That ends week 4 of veg. Time is flying. Hoping to switch to flower in two weeks for a total of six weeks in veg. Getting super stoked to switch over! Happy growing everyone! 👽
Likes
3
Share
Likes
88
Share
@No_Clout
Follow
I can’t believe it’s finally over to be honest I liked them that much I dident really want to cut them down 😂. But overall they been great had a few deficiency’s along the way but they always bounced back, Their the most frosty and dense buds I’ve ever grown and if it tastes as good as it looks I’ll be doing it again. Big thanks to @PharmaZ for all the help from start to finish I can guarantee they wouldn’t be like this without his help and the rest of the community. Once dry and jarred I’ll update the rest. ✌️🏻🔥 29/10/18 - at first I wasn’t the biggest fan of this smoke as the flavour really wasn’t for me as I’m more a fan of citrus/fruity strains but to be honest after nearly a month cure the taste has improved a hell of a lot it’s got a very smooth taste and I can taste the cookies gentetics in it now m, especially in plant #1 because #2 and #3 are a lot more diesel/gorilla glue. Strangely all three plants were completely different pheno types but when it comes down to it I definitely preferred plant #1 from the other two as it had the best taste, bud density and overall appearance with the light green/purple colour way whilst being quite frosty. Plant #2 is still quite dense defiantly a 7-8/10 but has a very strong diesel taste and I also find the shape of the nugs appealing as their less dense than plant #1 but they have larger nugs and a mad bud formation I haven’t seen much. Plant #3 was unfortunately the ugly duckling of the group as you can tell from the picture, she was extremely hard to train as she had hardly any flexibility and I felt like I was going to snap the main stem from day one of training and because of that scenario she revived less light and dident grow as tall and dident keep up with the rest of the canopy, it’s still dense and frosty it’s just the nugs are a lot smaller compared too the others and again a diesel type smoke.💨💨💨
Likes
170
Share
👉Alrighty Then👈 This plant finished out just around 90 days from seed 👉Puffed a bunch of it , and its exactly what i had hoped for i love the WC 👈 the buds are tight and smoothered in resin 👌 I have done at least 50% of the FB Catalog and this has become one of my favorites of there's....... Would definitely grow this one again and would recommend 😳 Persian Pie from Greenhouseseeds Full Gas from Greenhouseseeds Babba Kush from Greenhouseseeds Rainbow Melon from Fastbuds Papaya Sherbet from Fastbuds Weddingcheesecake FF From Fastbuds Purple Oreoz F1 From Seedsman Slurricane From Premium Cultivars Soil by Promix Nutrients by Cronks This was a crap ton fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈
Likes
11
Share
Everything Is okay 😁 the girls stay very Happy and micorrize change the games 😁 . I adding Black humus and Bat guano too improbe and protect the microbial live in the medium. Stay tuned for updates✌️✌️✌️ Little update... My cat ruined a branche 🤬 and I cut... The bud weight 26 grams wet... Not bad for 5 week 😁
Likes
8
Share
@Merulix
Follow
The drain-EC was too high / EC 3.2, Lower leaves started curling and dropping. i had to flush a bit.
Likes
6
Share
When should they start flowering?
Likes
4
Share
Venga familia que ya viene la cosecha de estas F.U.H. de Seedstockers, que ganas que tenia ya de darles tijeretazo. Que variedad , me encantó cultivarla , sacaron unas flores bien resinosas y alucinantes. Las flores aparte son muy pegajosas. a sido una genética con la que disfruté bastante, fue muy fácil cultivarla. Y a la vez es medio resistente, teniendo trips desde la 4/5 semana incontrolable salieron bastante bien. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: Eldruida https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.
Processing
Likes
5
Share
@EUPHORIC
Follow
Plants are really taking off now and i decided to switch 12/12 yesterday. They have been super-cropped in the final veg week. Knuckles are forming on the stems as the lower nodes spurt upwards, cannabis is known for stretching most shortly after the switch. Most strains will remain growing a few weeks more before actual P-K uptake.
Likes
1
Share
@Luke_Lee
Follow
————————————————————— WEEK 6 / DAY 37-43 Mars Hydro FC-E3000 Floragard Professional GrowMix 11L Plant bag made of fleece Light: 50cm Schedule: 18/6; PPFD: 686-700 umol/m2/s 20° C - 50 RH 1L per Plant PH 6,5-7 2ml BioGrow; 1ml TopMax ; 1ml BioBloom 1ml CalMag #1 Blueberry Automatic #2 Blueberry Automatic Fan, extractor and pump ON 24/0. ————————————————————— -24.02.2025 The first week of flowering begins today. The light will be switched to an 18/6 light cycle from today. The distance is 50cm with a value of 680-700PPFD (PhotoneApp). TopMax and BioBloom will also be added to the irrigation water from this week. I am curious to see how the plants will develop in the coming weeks. -01.03.2025 The plants are developing very well. They were watered on Tuesday 27.02 and today 01.03 with 1 liter of water each (2ml BioGrow; 1mlCalMag; 1mlBioGrow; 1mlTopMax). The LST was adjusted again and a few leaves and popcorn buds were removed. Total Time-1031:02h Total Energy-166,72 kWh
Likes
10
Share
This will be the last week in veg! You can already see some coots forming and their height is upwards of 18 inches. I will switch their light schedule on Sunday and start the bloom. Can’t wait!!
Likes
4
Share
Did LST and topped Pheno 1 & 2, 3 is too funky to mess with. I think PH was just my issue and possible too high intensity light as I lowered to 60%, but also brought my PH to 6.5 so I'm guessing that helped too.