2/17/2024 - Vegetation Week 1 Day 1- I removed some of the water to see where the roots were only one had roots in the water. However I want to go ahead and get them on Week one Nutes So I am over 50 gallons of water in the system so I mixed the Trio at a 1.0mil per Gallon but restricted it to a top of 50 gallons period. I top fed the other two to keep encouraging root growth. I also finished my drying and curing from my last run and wanted to show what it looks like all bagged up and in the cannatrol. I added the following Nutes: Silica = .5Mil/Gal= 25Mil CalMag= .75Mil/Gal= 37.5Mil FloraMicro = 1Mil/Gal= 50Mil FloraGro= 1Mil/Gal= 50Mil FLoraBloom= 1Mil/Gal= 50Mil ORCA = .5Mil/Gal= 25Mil EPSOM- 1 big pinch 2/18/2024 - Vegetation Week 1 Day 2- I top fed #1 and #3 since they still don't have roots in the water, I will continue one top feed a day until roots hit water. 2/19/2024 - Vegetation Week 1 Day 3- #3 now has root in the water.. Yay!! I now have #2 and #3 with roots in the water so no top feed for them. I only had to top feed #1 and the only reason I didn't just go ahead and cull her today was I am responsible for breaking her tap root and stunting her, I wasn't careful enough and she was the first to show a good root. In that vain I will carry her a few more day's top feeding but if not root by the end of the week she is getting culled. 2/20/2024 - Vegetation Week 1 Day 4- Today I Ensured the PH is in range, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water. I also removed the humidity shields from #2 and #3 today the ladies were touching the sides so they are done with the extra shields.. 2/21/2024 - Vegetation Week 1 Day 5- Today Morning: I Ensured the PH is in range, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water, Evening: I decided that the roots of the two are looking great so I am going to drain and bump the Nutes to a full Week 1/ Week 2 Nute base. I added 36 Gallons I added the following Nutes: Silica = .5Mil/Gal= 18Mil CalMag= .75Mil/Gal= 27Mil FloraMicro = 3Mil/Gal= 108Mil FloraGro= 2Mil/Gal= 72Mil FLoraBloom= 2Mil/Gal= 72Mil ORCA = .5Mil/Gal= 18Mil 2/22/2024 - Vegetation Week 1 Day 6- Today I Ensured the PH was not too high as the system continues to cycle the water and adjust, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water, 2/23/2024 - Vegetation Week 1 Day 7- Still have to Top Feed #1 no roots in the water, however she is still progressing nicely slower than her sisters with roots in the water but still going strong.

Day 84 Week 6 flowering

Que pasa familia, vamos con la primera semana de florscion de estas Gorilla Melon feminizadas de fastbuds. Vamos al lío, de las 3 plantas, me quede con 2 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. Y ya superaron el shock provocado por el mismo trasplante. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. Hasta aquí todo, Buenos humos 💨💨💨

Started flushing today.

Germination day Friday Oct 7 Day 1 - placed in paper towel Day 2 - nothing yet Day 3 - both have a small tap root. Transplanted into there pots. Day 4 - led dimmed to 50% and waiting. Day 5 - And we have life!!! Both popped out.

Absolutely over the moon with my first attempt really interesting and fun think I have myself a new hobby and grateful for the help from you guys on here ✌️🏻

Doing good so far. Seems like they can handle the sunlight.

Incredible buds on these girls and super dense strawberry gorilla.Smell is unbelievable strong and it’s like a little slice of heaven inside the tent.Will harvest these two girls together.

10/23: I fed today with One, sweet & sticky, signal, superthrive, silica, and a little ca/mg. 10/27: Fed today with one, signal, sweet & sticky, silica, beastie bloomz, kangeroots, and humic acid.

She Is starting to smell so much 😍 and smell Is so tasty🤤🤤

Day 22 (2020-05-31): Did some additional LST and defoliation. For LST I used wire hooks pushed into the soil to encourage sideways growth of the new branches. The G14 looks a lot bushier but it did not have as many large leaves that needs to be removed. Also, due to it's mutant nature, it started with two main branches. Maybe I should have pinched one back, but it seems very healthy so far. Roots are poking out the bottom of both pots. Not sure if this is bad or not. It did not happen in my previous grow but was using 3 gal instead of 2 gal fabric pots. Day 23 (2020-06-01): Investigated the mesh cup filter I am using with the Blumats. Turns out I had it backwards and it had some slimy feeling film inside. Not sure if that is contributing to the PH rise when water sits in the tubing, but I cleaned it out and swapped it the right way. Made some small LST adjustments. Day 24 (2020-06-02): Removed a couple of blocking leaves, made some slight LST tweaks to even things out. One of the Blumats seemed like it was not dripping but bleeding the line caused it to kick in. Must have still had some residual air in the system from yesterday's filter adjustment. PH is still a bit higher coming out of the line, but is much improved. Will continue to monitor. If it stays high may try removing the filter altogether to eliminate that possibility. Day 25 (2020-06-03): Changed the reservoir out. PH was high, but still in range but the water was cloudy and had a pretty rotten smell. Going to check PH and smell daily and see if I can get a handle on what is happening. Maybe I just need to have a regular changing schedule. Day 26 (2020-06-04): PH of reservoir at 5.6. Day 27 (2020-06-05): PH of reservoir at 5.7. DId some LST adjustments and removed a few larger leaves. Noticed some light discoloration spots on a couple of the older leaves. Moved lights a bit closer (21") Day 28 (2020-06-06): Noticed some yellowing on the tips of some of the new growth. I checked the lights and they had been way closer than I thought. Moved to correct distance to see if it may have been early signs of light burn. PH of reservoir is at 6.2. Most likely will change out tomorrow. I also noticed today a bit of white fuzz mold growing on the outside of the pots and even a little bit on the surface of the coco. I am going to turn off the humidifier for a few days and get some 3% H2O2 to wipe down the outside of the pots.

On Day 29 i gave her 1l of water with some supervite and 3.5 ml of bloom complex. I later added 500ml with 0.5ml of calmag 1ml powerzyme some alg a mic melasse and supervite. On Day 26 i gave her 1.5l of water with 10ml of root coomplex 4ml of powerzyme and some supervite as well as an ph of 6.5 On Day 29 i gave her 1l with 3ml of bloom complex 1ml of calmag 1ml powerzyme and 5ml of rootjuice. On Day 30 i placed her outside On Day 32 i gave her 1l of water with 2ml of powerzyme and 1ml of calmag. On Day 34 i gave her 1.5 l wirh 5ml bloom complex 2ml of powerzyme 1.5ml of calmag an some supervite.

Seeding March 16 Germination 21-25 march 🇱🇺🌱🤩 Day 56 from seeding, flower in full progress Grow method 12/12 from seed- Sea of green here I'am again, yesterdy morning my ladies had their last schwazzing that means day 20-21 in flower, all in all everything looks very good, from yesterda on my CO² system is also in operation, tomorrow my ladies only have a bit of ph reg. water from me and giving them some time to revover from the defoliation stress before i start with nutes again.... and now I leave them alone until further notice.... Cheerio & Tataaa🤜🤛👊🏻🇱🇺🌱 ⚠️ Short info about my Humidity: as you can see my humidity sensor from my CT grow system that I have is around 80% RH, but that is not right, my humidity  is around 49-52% my sensor gets 24 hours  fully blown by my humidifier  onto the sensor no matter where I hang it because my ventilation is all around and is blown from top to bottom and a box fan lets everything circulate through the growroom so my old hygrometer is hanging in there againe and everything is fine Amnesia by & for @Superstrains Official Runtz by & for @Zamnesia Webshop came in 1 week later Sour Diesel by & for @Inseedious NL Cobalt Haze by @Sensi Seeds  & Arjans Strawberry Haze by @Greenhouse Seeds  for @Amsterdam Seed Center Under & for @Mars Hydro Factory Nutes by & for @Hy-Pro Fertilizers Soil: Atami light mix & 5mm broken puffed clay & 16mm puffed clay on the bottem of my 5.5L. pots Temp: 24,56 °C temp outside 15°C Lights: 12/12 Humidity: 49-52 % Vpd kpa: 1.3-1.4 Roots 17.50°C Ph : 5.90 Tds/ec 1.5 Water: 0.8L. p.plant  23°C CO²: No Mercy Tabs & boost bucket Nutes by Hy-Pro Fertilizers HyPro : Spraymix 0ml by 1L. HyPro : Terra vegi & bloom 4.5ml by 1L. HyPro : Rootstimulator 5ml by 1L. HyPro : Generator 0.16ml by 1L. HyPro : Epic Bloom 00ml by 1L. HyPro : Cal-Mag  0.5 ml by 1L. Light distance: =55cm to plant = 30cm to CTgrow sensor dimmer on 80% = 980umol/m²PPDF +-10 Vpd/kpa  - 1.350 -1.400 Gear all controlled by @ctgrow 1x MarsHydro TSW3000 1x MarsHydro TSL 2000 Air Van: 900m³ Prima Klima on 30% Filter: Prima Klima 660m³ for seed& veg stage & 660m3 CanLite for bloom stage 3 l water cooling airco Diamant... 3.3l humidifier 1.8l dehumidifier My grow room is variable in size 120cmx120cm² Custom Grow space for sog 150cmx150cm for scrog   Big THANKS to my lovely sponsors : Super Strains,  HyPro Fertilizers, Amsterdam Seed Center, Zamnesia, Inseedious, BTB Grow Supplies, Mars Hydro & CT Grow Systems

Eventful week for the girls... threw in another 95w LED to finish out flower and to grow an extra plant or two next run. Checked the trics on the leftmost plant and they were almost all cloudy and even starting to turn amber in a couple spots, so I decided it was time to chop her. Probably gonna take the other smaller plant down soon as well. The tallest plant is still looking larfy as hell but I'm hoping she'll thicken up a little over the next week or two.

Tangie'Matic is showing nice bud development this week. I backed down a little on the Recharge this week, but still giving twice the suggested amount. Also still giving her Mammoth P. Will start with MegaCrop (Greenleaf) nutrients later this week. 👍

Hello everyone, I've had a busy week, so this is what I have for you guys See y'all next week 🤘🤘

Hello This is the end of week 5 and the beginning of week 6 of flowering. The plants are starting to put on some weight now... and the resin is flowing. I like it when the resin is visible on the edges of the top fan leaves too. Those plant always have more resin.... Still got a month to go. I like to flower for 10 weeks. Smelling strong in here now.... Sweet Candy Floral Cookies... Yeah Smells Good!!! 😃 OK. Have Fun. Chuck.

Some old autos I’ve been working on crossing for awhile. Making the switch back to coco so just doing a small LST test run and a cheap drip emitter system. Did the old paper towel method in a Tupperware container placed onto a heating pad with 100% sprouted. Started on a very diluted feed. Letting them get anchored and will switch to bottom feeding for my first few feeds to get the roots chasing the moisture to build a solid root system early, then back to the top drip system. Going to be playing with some of my leftover nutes so won’t be following any set charts. 1.5ml micro,grow,bloom and a drop of cal mag

Would definitely recommend for an easy grow. Takes forever due to 100% sativa genetics but well worth the grow. Smells just like cannalopes with a hint of cocoa and a strong dank/sour odor. High is fantastic starting and feeling heaviest right behind the eyes/sinuses. Spreads to extremities in a slight relax feeling. The taste and smell of the smoke is extremely smooth and tastes like the sour + cantaloupes. The buds have a lot of shades of green but are predominantly dark covered in crystals. Smell isn’t extremely strong in bag but once buds begin breaking apart it is almost unbearable and resin makes it hard to break apart by hand do grinder is needed.

update later