Well i ran into some problems, water temps too high over the weekend (i wasn't there) but roots and plant still looked healthy despise 24,5°C water temp over 2 days. I added 2,5ml each Hydro A & B on day 15. EC rised to 0,89 / PPM 445 and two days later ppm still the same i guess because the only part of the root touching the water couldn't uptake any nutes because of the high water temp? (everything above the water looks healthy af tho) Since my apartment is usually really hot in the summer i bought a TEC peltier water cooler + pump and a thermo regulator to ensure the water temps will stay between 20 and 21°C. i just need to wire that up and diy saved me me a lot of money. i payed about 100€ and have automatic temperature control and a cooler from amazon about 200+ € so i think its fine. I'll show you the set up once it's completed and works. Its the best budget cooling i could get my hands on imo. Today is Day 19 my parts came and i really managed it to half ass wire shit and not burning down something. wish me luck. I payed a total of 93,22€ and now got a really quiet, 150w DIY Peltier/TEC) cooler that automatically turns on once the water temp hits 21°C (69,8F) and stops when hitting 20°C. So far its working REALLY well. like im amazed and so proud i managed to do that and it was pretty easy. i had big problems with temps in my attic flat and water temps quickly rising to 24° and more which means root rot. Since i use the cooler all new roots just looking healthy as fuck. the plant is growing well and i see every day progress. So i saved a shit ton of money. the cheapest water cooler i could find on amazon was around 350+€. Sure it bet it works better, is safer to touch, not very likely to cause burning down my house because i had to twist copper wires together and let 230V run trough it BUT no way i have that much money for things like that. The cooler cools water temps from 21,5° to 20° in about 15minutes. the longer it runs the better it cools. i bought a temperature controller outlet ( 25€) which let me set 2 temps and it turning the cooler on and off. I had to cool it down manually every 2 hours before with frozen water bottles💀 So here are the stats for day 19: Water Temps: 20-21°C / pH: 5.42 / PPM: 485 / EC: 0.96 / height: 2,5cm (lol) (i added some more Hydro A and B because i thought i maybe see some nitrogen deficiency) i bet i will see some RAPID growth now since everything is dialed in, hopefully lol 150g im coming!

Hello everybody! Here we are a week later and I’m starting to see some nice improvements and developments. This week I fed all plants pretty heavily with Recharge and Dolomite Lime (and a little Cal Mag). The plants seemed to like it, the color is really coming back to a nice shade of green instead of the pale yellow’ish green. I’m also seeing nice bud sites developing on all of the photos. My autos are doing great too. The FastBuds Blackberry is a beautiful shade of purple and the Barneys Farm NYC Diesel is nice and chunky with tons of crystals. I’m going back to my normal nutrient routine this week and think it should be fairly smooth sailing from here. One negative is I seem to have inherited some bugs from my wife. She asked me to put one of her outdoor plants in the room so it would survive the winter, well it looks like that plant was infested with bugs. The little f’ers had a feast on some of the leaves. My wife gave me the OK to toss the plant, so with the plant removed it should be fairly easy to irradiate any remaining bugs with some sticky paper. I’d like to say thank you to all who answered my question regarding recommend reading on cannabis. I’m selecting the answer for the Grow Bible by Greg Green because I was actually unaware of that one. I’m familiar with the Cervantes and Rosenthal versions but not Greg Greens. I’ll be ordering that book after I receive and finish “True Living Organics” by The Rev (should be here tomorrow). This week I have a new question for my GD friends…. CO2? I have not been using CO2 but EVERY book I read recommends using it, I’m not prepared to go out and buy a CO2 tank, regulator, etc… at this time. Has anyone ever used one of those CO2 bags? Or do you have any DIY CO2 solutions you can recommend? I’m looking forward to your answers on CO2. I’ll leave you this week with another interesting excerpt from “Marijuana Cultivation Reconsidered: The Science and Techniques For Huge Indoor Yields” by Read Spear: “I prefer to use high-pressure sodium lamps. With the exception of LED's, HPS lamps are the most efficient source of light you can buy, both in terms of light output and light spectrum. Having read nearly every book on the subject of growing pot, I feel that their authors tend to overemphasize the importance of light spectrum. You do not need to alternate between metal halides (for growth) and sodiums (for flowering). That is an oversimplification of the plant's light requirements. You may do this if you like--it certainly won't hurt--but I firmly believe that the gains are just not great enough to justify the cost of the extra MH lamp.” -Read Spear

Week 3. This is where the fun begins. The smell is amazing. The stretch is crazy and the stems are stiff like bamboo. There's no loss in terps. They're actually getting a lot stronger!!

This is the first day of week 4. I decided against any form or training or topping and decided to focus on watering and getting nutrients correct for this first grow. Being it’s a tent grow, I can essentially grow when I choose now anyway. Touching the plant leaves the soft but pleasant smell on your fingers that we all know and love. I’ve also drilled more holes in the bottom of the pot and do get some runoff when I water now. Considering switching to 12/12 in a weeks time.

For Now I can only say that this strain seems good and tasty, but I need to smoke it first to give a complete review. First Strike: very good effect and taste, but I would like to smoke again later untilshe will be perfectly dry 😉 Now I smoked her several time, even if she is not yet ready she is veryyyy gooood 😋

⚠️ This is my worst week in growLife ⚠️ we started with harwest, cos i'v found a few days ago, first mites.. Actualy was too late, and only one option what can we do is - harwest. Ať the moment we are few days to go, but IF we gonna wait and grow thoose couple days until they reach 100%, mites gonna be everywhere... OHH YES, TGEY ARE KNOW AS Well, we already threw away 2 plants, cos two of them were totaly full with milion of eggs, everywhere, leafs, buds etc, that way we need to chop all of them a save Max as possible. This "grow school" - lesson, is pretty hard, hurts and of course -€ as well. Plants do need us every Day and, i need to read more again, i have to watchout them múch better. AT the moment we still choping, and yesterday we Just moved all of Tangie's in Tent 2,2mx1,1m, cos they need i think 2 weeks more. We gonna test and watchout strictly this tent... Thoose fuckin mites are everywhere, i found them in small tent as well, where we have automatics... This is really 😬 Guys, i wish You all, that this my own mistake are enough for you to learn from... 🙋‍♂️ Ohh yeah next tíme we gonna vegetative phase 4 weeks, this one was only 2 weeks.. ⚠️

Tag 55: Ich gebe kein Dünger mehr in das Gießwasser. Bald wird geerntet 😃

Running smoothly so far... Still only watering lighting, approx 200ml every 3 days or so. Using the BioBizz nutes.. The fish mix stinks!

Hello. This is the end of week 9 and the beginning of week 10 of veg. Quite week for the plants and us. It's above freezing now, but it's one storm after another here. The plants are dong well and I'll turn over to flowering next week. I'll make clones at that time. I'm after the best plant so I'll whittle the 14 plants down to 1 or 2 plants when I'm done. But I have to take 3 clones of each to be sure I get 1 to regrow when it's done. So I'll be doing that this week. My next trim/prune will be before the 3 week of flowering, before the resin starts to flow. Through this veg I've been giving a full feeding and then just watering and then a full feeding and then just watering.... You get the idea... I let the pots dry and hopefully water/feed before I get any wilting. We've started a new Freak Bros. book. Comic Book #10 Published in 1987. It's the 3rd in the trilogy. You'll find the first 2 comic books in the story in other diaries. Have a look around in my other diaries and you'll find them. OK. Have fun out there. Chuck

Perfection💯💯

Not much happen during this week. Plants look healthy and on a good track. They drink roughly 2l a day

Da sie nun in die Blüte gehen habe ich ein weing Lolipoping versucht.

Unfortunately we lost one (intersex) but I feel this girl was the right one to move forward. Fantastic smells very OG, beautiful purple in colour plenty of colour tbh and grows nice stacked buds.

Bonne semaine ! 😁 28/07 : Pulvérisation 2ml/l de vita race avec une cuillère à café de savon noir par litre d’eau. 29/07 : Défoliation et cut des secondaires.

She is off to a great start. I sprouted her right in the rockwool in the DWC. Looking forward to see what we can make this lady do for us. My tent seems to work best with mature plants in the 36” range although my setup can handle 60” in height the width becomes an issue. I plan to flower her when she is about 16” tall.

No pude subir fotos de estas pequeñas pero alcance a tomarlas anyes del corte en mi pais es invierno y con fuertes lluvias no pude controlar la humedad ya wue estan bajo una malla pero esta no fue tan afectada