Hi everyone :-) This week a lot of nice things happened in the flower tent :-) Everyone looks super nice, and is growing stronger and more beautiful week by week 😍👌. The blue cheese smells like a dream ;-) As usual from this variety 👍. The kosher tangie is also very, very tasty 👏🏻. Both got Pk 13/14 this week for the last time :-) Everyone else is developing very well 👍, That will be the last diary with several strains together :-) In future everyone will come individually 👌. I wish you a lot of fun with the videos, have a nice weekend, stay healthy 🙏🏻 and let it grow 😎👌

Week 3 Veg Update, (Please see the following) Both Plants ( Seedsman -Critical +2.0 - Blimburn (Applefritter) Thus far both plants are coming along nicely WIll be using Bud clip bender this week to utilize PPF light usage. *Mid-Week Update* Introduced CaliMagic this week LST and Bud clipped Light Defoliation Introduced Element Nutrient (Flower Fuel) 1 week until early Flower. *End of week recap* 08/21 Light Defoliation Bud Clip tie down Thus far all is running smoothly, No changes from above.

😁🍀👨‍🌾🏻👍✌️💚

Flower week 2, keeping the RH & temp down as much as possible, so far so good.

11/30: I fed them today and supercropped the taller one a little bit. Just trying to encourage her lowers to compete for apical dominance. I raised the lights another few inches 12/1: I raised the lights about a foot because of a couple of taller plants, so these girls and most of the others are on a platform so as to be within 15 inches of the lights. Their platforms are some of the shortest, and I think they're about to catch up with the others.👍 12/2: Busy with life...didn't do much. Very cold days, so the high temp in the closet was 72f today👈 12/4: Switched to 13/11....afraid of it taking too long to flower and ending up with a bunch of pain in the ass 5-footers..

We are entering the third week of growth for our FBA 2503 strain from 42Fast Buds, and everything is progressing beautifully. We've recently transplanted the plant into a 10-liter pot, giving it more room to thrive. Even though it's an autoflowering strain, we've decided to experiment with a 12/12 light cycle—12 hours of light during the day and 12 hours at night—to see how it responds. The daytime temperature peaks at 30°C, with an average range between 27°C and 28°C, while humidity is consistently maintained at 60% to 65%. The plant has reached a height of 14-20 cm and is already showing three sets of leaves. We're preparing to start low-stress training (LST) to help guide its growth. In addition, we've begun feeding our beauty with nutrients from Xpert Nutrients, and we’re really pleased with the results so far. The plant looks strong and vibrant, and we're excited to see how it develops over the coming weeks!

CANADA DAY UPDATE🇨🇦 THE TRAGICALLY HIP🤘🥁🎸🇨🇦 MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

11/20/23 - Day 14 - Today the box flipped to Veg state. I made the decision in the software yesterday, its take effect the next day at the light on schedule. The system will do a couple of things now that it's in Vegetative mode. Lights will remain at 18Hrs On/6hours Off, however the intensity will slowly creep from 30% intensity to 100% within a couple of days. Air Temp will remain the same at 79deg. F Humidity will go down to 50% Water temp and PH will remain the same, 64.5deg. F and 6.0Ph Because I have it all hooked up for Auto water. It started the first video about 1 min after lights on. It drained the water, refilled it. After it refilled it, it turned on the air stone, started the water temp cool down, and it slowly over the next 30 minutes delivered nutes, and finished it off with balancing the PH. All of this was done on its own. I DID NOTHING. Other than verify because why not. I sat back and watched the system work. This time around with everything hook up for auto I really am not doing much. The hardest part of this grow so far is not opening the door while the light is off. the rest of the week I don't expect to do much. I will update daily with pictures and things that I am noticing. This is an Auto strain. I am a little worried about growing an Auto in this box. usually, I can control the growth utilizing the lights because I'm space limited. This time the plants going to flip to flower on its own. I'll need to make sure I am training and cropping early on. 11/24/23 - Day 18 - Everything is starting to get aggressive in there. I say that because the new nodes are growing out of new nodes on the top. It's like its packed full of plant and it all wants to come out at the same time. The leaves have more serrated Leafs than I have seen on any of the other strains I have grown. Ill post a picture of the last time I grew this strain. I did it in Coco Coir. It will be cool to see the differences. 11/25/23 - Day 19 - The Leaves are all reaching up, and the plant is growing so fast! Its such a bushy plant.

Very huge plant … with big nuggets

END OF WEEK 4 FLOWER Seems to be going well, nice to be able to sit back and watch these girls grow :D Had some bleaching on a few of the nugs, so I dimmed the light slightly and managed to raise it an extra 5cm. I also bent a few of the taller stems out from directly underneath. Big Mumma is killing it, some real nice and dense little nugs on her.

Día 8 (28/10) Subo a DLI 20 Spray solo H2O RO en el top del sustrato Retiro la cúpula de humedad, porque una de las CBD Auto 20:1 tenia el tallo ligeramente doblado por falta de resistencia Sin la cúpula y con el ventilador a la potencia mínima (1/10), van a tener una suave brisa que va a hacer que se fortalezca el tallo! Día 9 (29/10) Las plantas se han estirado mucho y se tambalean un poco Creo que deberían haber tenido un DLI más alto desde el principio! Día 10 (30/10) CBD Auto 20:1 y LSD-25 Auto se encuentran "tumbadas" porque el tallo se ha estirado mucho! Hago un soporte casero con una brocheta de madera + alambre + clip de enrejado para mantener los tallos verticales! Spray solo H2O RO en el top del sustrato Día 11 (31/10) Las plántulas se muestran verticales y felices! Una de las CBD Auto 20:1 está mostrando un desarrollo muy rápido! Spray solo H2O RO en el top del sustrato Día 12 (01/11) Spray solo H2O RO en el top del sustrato Día 13 (02/11) Las plántulas se están estirando mucho! Creo que las falta DLI Subo el DLI a 30 Spray solo H2O RO en el top del sustrato Día 14 (03/11) Introduzco la 1ª BioTab a 5 cm de profundidad, lado derecho 1er Riego! 750 ml de H2O RO + ORGATREX 5 ml/L + BACTREX 1 g/L 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/

Gracias al equipo de Kannabia Marshydro XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Amnesi K - Lemon: La Amnesi-K Lemon es una semilla formada a partir de un trío de reyes, la Amnesia, la Lemon Skunk y la Jack Herer. Este matrimonio de tres dio lugar a una gran sativa que, con tonos dulces, terrosos y muy cítricos 🌻🚀 Consigue aqui tus semillas: https://www.kannabia.com/es/semillas-marihuana-feminizadas/amnesi-k-lemon 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 2: Fantástica semana, estan creciendo de una forma espectacular gracias a la ayuda de @marshydro, @xpertnutrients y @trolmaster. Se puede apreciar un tercer nudo aunque la aplicación de cola de caballo y el estar en una maceta pequeña ha influido en el tamaño de ella, se recupera muy rápido 😁. Esta semana espero trasplantar a la maceta definitiva. Potencia de la lámpara: 50%

She’s getting updated more often on Instagram the tags @smokeygrow_ …..This week iv let her do her own thing she’s loving the Phlizon pl1000 hopefully get her under the 2020 240w pro soon the colours on this girl are unreal really showing her full potential I seriously think this is one of the nicest colours iv seen in the actual nugget it’s self 🍓🥤 what do you think 💭

Day 70. So frosty and stinky but I can’t smell because my face is rebelling at me. My sinuses 😂🤦‍♀️🏻 She’s will be hopefully swelling more before her flush out. I’m excited to see her in her full glory.

Die Bilder sind jeweils mit ziemlich genau 24h Abstand aufgenommen worden, die Pflanze bwz. die Wurzeln schieben jetzt richtig an, das läuft. Ich hatte einen etwas zu hohen pH-Wert (damn you Apera!!1!!!), der war bei 6,5 weil mein Apera Gerät nicht mehr zuverlässig funktioniert hat. Das zweite das nach etwas mehr als einem Jahr kaputt geht... Hab mir jetzt ein Bluelab geholt, ich hoffe das ist besser. Bilder der Pflanze kommen auch noch die Tage. Das DWC System von Vivosun funktioniert hervorragend, die Wurzeln sind echt top. Die RLF ist sehr niedrig, da kommt die Tage noch ein Luftbefeuchter rein, die ist teilweise nur bei 32%, das ist kurz mal nicht so schlimm, auf Dauer aber schon sehr niedrig.

15th day into flowering- Trim some Fan leaves /anything cover canopy. 18TH DAY FLOWER- LOLI POPPING. JUST WATER EVERY 3 DAYS PH 6.5

Arranca hoy 13/03/24 la tercera semana de crecimiento, en terminarla pasamos a floración, eso será el próximo miércoles día 20/03/24 De momento algunas con 17 cm otras con 22 cm y en general todas mostrando su 6º nudo. Se empezaron a germinar el día 09/02/24 llevan ya 33 días. *UPDATE* 19/03/24 Vemos las raíces de una de las Gush Mintz y hago defoliación antes de pasar a floración. He quitado las 4 primeras hojas que desarrolla la planta y entre 4 o 6 hojas grandes de las que tapan los brotes. Vamos a esperar 2 dias y las ponemos en floracion.

The second week of vegetation is going well! This time, I’ve decided to try the Green House Feeding BioEnhancer instead of BioBizz Root-Juice. I’ve had issues with the shelf life of Root-Juice in the past, so I’m curious to see how BioEnhancer performs. The plant is looking healthy now, but it had a bit of a rough start. I initially planted it in soil that was too heavily pre-fertilized, which caused the first leaves to turn yellow.😔 Thankfully, it recovered quickly and seems to be thriving now. 💪 To keep the plant as stress-free as possible during vegetation, I’ve decided not to train it for now. I want it to focus on strong, natural growth without any added strain. I’m excited to see how it progresses over the next few weeks—things are looking promising!🌱😊

Essa semana alimentei as plantas (45 dias após transplante). Utilizei fertilizante Forth Flor regulando seu PH para 6.8 utilizando bicarbonato de sódio. Flores continuam desenvolvendo muito rápido e novos pequenos buds continuam aparecendo por toda parte. A planta ainda continua crescendo verticalmente, o que é impressionante, mas ruim pois está muito perto dos LEDs.