Likes
137
Share
@squalino
Follow
Bilan ​Retour d'expérience sur la culture : Cette variété s'est avérée être une plante très facile à cultiver. Malgré quelques erreurs totalement involontaires au cours du run — notamment un pH monté trop haut par moments et des coups de chaleur excessive provoqués par des lampes très proches (dus à la grande taille des plantes et à des températures extérieures élevées) — elle a super bien supporté les éléments. Elle est restée saine et en excellente santé tout au long de sa vie. Le système Autopot a, quant à lui, fonctionné à merveille : simple, autonome et redoutablement efficace. ​Le calvaire de la manucure (6 heures de nettoyage) : Si la culture fut un long fleuve tranquille, la défoliation finale avant séchage a été particulièrement complexe ! En raison de sa structure prononcée en queues de renard (foxtailing) et de la densité extrême des buds, retirer les petites et grandes feuilles incrustées au cœur des têtes est devenu un travail d'orfèvre. Il aura fallu 6 heures de nettoyage intensif. Une multitude de "monofeuilles" (feuilles à une seule pale) s'étaient formées à l'intérieur même des têtes, une réaction de défense typique de la plante pour transpirer et évacuer le stress thermique causé par la proximité de la lampe. ​Conclusion du run : Je ne pouvais sincèrement pas rêver mieux pour cette session. Cette plante se classe directement parmi mes préférées de tous les temps. C'est malheureusement ma dernière culture avant la pause estivale. On se retrouve en septembre pour de nouvelles aventures où je vous réserve déjà de très belles surprises ! D'ici là, je souhaite à toutes et à tous les plus belles des cultures. ​🙏 Remerciements : ​Un immense merci à Fast Buds pour avoir mis au point ces génétiques incroyables qui servent de fondation à mes travaux. ​Merci à Biotabs, ainsi qu'à @MIA_BIOTABS et @Mrs_Larimar ar pour leur présence, leurs conseils et cette gamme d'engrais formidable, si simple à utiliser au quotidien. ​Un grand merci à toute la communauté qui a suivi, commenté et fait vivre ce journal de borEnet moi même à travers vos extraordinaire commentaires ❤️❤️❤️❤️💘💘💘💘 ​Enfin, un merci tout particulier à @Dryrocket pour m'offrir la chance d'expérimenter leur appareil de séchage. Dora n'a malheureusement pas pu attendre plus longtemps dans la tente et a dû être coupée hier, mais j'espère recevoir la machine aujourd'hui ou demain pour y installer directement ces 571 g de bonheur ! ​
Likes
11
Share
🌿 Woche 6 – Keine besonders gute Woche 👺 🌱 Wachstum & Training Zweite Blütewoche – und zack! Gleich zwei vielversprechende Triebe sind ausgefallen. 😭 💀 Den einen habe ich aus Versehen mit der Hand umgerissen (siehe Video). 👉 Der andere – und das ärgert mich noch viel mehr – war der Haupttrieb der dominanteren Guava. Beim täglichen LST ist er mir abgebrochen. 😰 🔻 Schätzung: Bis zu 10 g Ertragsverlust. 📊 Prognose Das Blätterdach hat nun zwei sichtbare Macken, aber der Rest entwickelt sich weiterhin solide. Vor den Verlusten lag meine Schätzung bei ~100 g Ertrag. Jetzt wird es schwer, die 100 g noch zu knacken. 😕 💧 Blumat 💧 Grade als ich anfing mich an den Blumat richtig zu gewöhnen, fängt er zu spinnen an. Er fing auf einmal an, viel zu trockene Werde zu liefern. Ganz merkwürdig. 😣 Und ich habe eine Woche lang jeden Workaround gemacht den man machen kann. Da war ich doch sehr Endtäuscht... Jetzt muss ich wieder mit dem Finger rein. 💩 💡 Licht & Schatten PPFD wird langsam, Step by Step erhöht. 📈 Aktuell ca. 600 µmol/m²/s. Je höher die Triebe wachsen, desto mehr Licht bekommen sie ohnehin. ☀️ ☀️ Wetter Die Temperaturen sind und bleiben brutal: 25–31 °C Die Lady´s schlagen sich tapfer unter diesen Bedingungen. 💧 Gießen 🕒 Alle 2–3 Tage 🚿 Jeweils 2,2 l Wasser 🎶 The Grow must go on! 🌱
Likes
14
Share
@GrowerGaz
Follow
An easy to grow strain that provides quality over quantity. The smoke is quite potent and has floral and kush aromas. Very strong floral flavour
Likes
62
Share
@Chucky324
Follow
Hello. Wow! There has been a lot of color changing going on here. I'll be harvesting in 6 days. I've flushed 3 times so far and I will do 1 more flush before harvest. I had a extra #2 clone and put it in the garden, where I harvested the onions. I wanted to test for powdery mildew and pest resistance. I took some tester/taster clippings and they will be dry in a few days. Nothing else for this week. Have Fun. Chuck.
Likes
9
Share
@Drtomb
Follow
The hairs have really started to stretch out. As this is a strain ive grown, i expect to see some good results. We will see. We are about 2 weeks from completing this grow.
Likes
1
Share
Likes
3
Share
Always cool to see what old school strains are all about. If there’s something experience has taught me is that classics are classics for a reason, and that’s the theme of this cycle. The germination was exceptionally fast, followed by the development of a thick stalk and huge broad leafs, this Gorilla surely started strong. Humidity and temperature kept fairly high throughout the week (70%/ 24°C), with regular misting, which they love! So far so good, feels like a happy and healthy seedling. Let’s see what she’s got 💪🌱
Likes
1
Share
2.2 Plants have been moved into the tall RoyalRoom tent. Tent sits inside Ikea PAX wardrobe, I use RuuviTag meters for temperature and humidity monitoring and a couple UPS devices as a backup power for exhaust fan & led light. I have planted Alfalfa and red clover as a cover crop, also trying out Blumat digital soil humidity meters this round. PPDF at canopy level is at 400-450umol/m2/s, there is a possibility to swap out the solo led drivers for one big one if I want more power for flowering. 3.2 I tied down the tallest branches to the fabric pot to even the plant out, also gave the pots a little Raw nutrients B-vitamin foliar spray. 4.2 Worms added to pots and gave both plants 1L of B-Vit water. 7.2 Tied down the plants, also gave the right side plant 2 litres of water today, 1L for the left one.
Likes
10
Share
@FunkyNutz
Follow
Week 4 seemed a bit slow at first, but i also realised that I wasn't treating coco appropriately, I should feed nutrients every time I water and control the ph and ppm better. By the end of week 4 I got a water quality tester and am now able to properly take my ph down and monitor ppm so my plants don't get nutrient burned, but still gets enough nutrients in time. I also allowed good amount of the top layer of my coco to dry because I mixed up advice that received about soil and coco together. Apparently coco has no issues with overwatering unless your pots have no drainage so in the last 2 days I started treating coco the way it's supposed to be treated, I also finally got calmag and my plants are showing good signs of health past 3 days, they look revitalised and happy again 😊 Unfortunately, apple fritter was way too sick for me to continue with it so I restarted it in a proper coco and perlite mix that's non fertilised, that's a separate diary because its a whole month later. I decided not to train the first 2 plants just to see how the natural process is supposed to go.
Likes
25
Share
FAT BANANA 🍌 AUTO / RQS WEEK #10 OVERALL WEEK #5 FLOWER This week she's doing good no issues to report she's looking good buds are getting structure to them and they have nice trichome coverage! Stay Growing!! Thank you for stopping by and taking a look much appreciated!! Thank you ROYAL QUEEN SEEDS!! RQS / FAT BANANA 🍌 AUTO
Likes
106
Share
Stellar week for the Critical Girls. The others are still lagging behind a bit, I wish they'd get their act together. Some are showing a little nitrogen deficiency, so I'll give them a foliar spray tomorrow. I also flushed them with some sledgehammer back on Thursday because one of the Critical Cures and the Blue Shark was showing a little Boron lockout.
Likes
70
Share
Everything is going great. No major issues no major problems. Plant growth is phenomenal. I’m gonna lower my scrog net a good 6 - 8 inches tomorrow. Get the plants growing into it. I figure another 3-5 weeks of veg and then off to the races. I haven’t yet decided if I’m going to use canna boost this round. I haven’t decided if it’s worth the cheese anyone wanna give their ¢.02? I’ll definately use molasses in flower. But that’s it, I don’t like adding adjuncts and unneeded crap. It’s all just a waste. I used mammoth last grow on one plant and the plant I didn’t didn’t use it on got higher yeilds buy quite a bit. 1/2 Oz. So that’s shit is snake oil. I really feel anything you add to your grow should yield you more than it costs right? ROI.
Likes
2
Share
@Oyziphar
Follow
We had a medium week with sun and rain 🌧️🌞 Pleasant outside temperatures 🌡️; and perfect in the greenhouse I topped and pruned the plants to become a flat canopy 👊 Once a week I give the plant a liquid booster with OPF 7:2:3 ; Fulvic 25 ; Yuccah ; Biovin liquid ; Earthworm compost extract. Big Thanks to Luc from Plant Health Solutions / Bioplantenvoeding dot nl 🙏🙏🙏
Likes
9
Share
@OGbros
Follow
ITA: Ciao a tutti, le piante continuano a stare bene ma l'umidità era troppo alta quindi ho deciso di comprare un nuovo estrattore d'aria da 125mm (prima era da 100mm ma non era sufficiente). Vedrò nei prossimi giorni se si vedranno risultati EDIT: l'umidità purtroppo non è scesa in quanto non c'è ricircolo d'aria nella stanza in cui c'è la box. Probabilmente userò un deumidificatore. Le piante hanno messo molte foglie e si coprono un po' motivo per cui tra qualche giorno eseguirò un'altra defogliazione. Stanno iniziando a fare odore, molto leggero ma si inizia a percepire ENG: Hi everyone, the plants are still doing well but the humidity was too high so I decided to buy a new 125mm air extractor (it used to be 100mm but it wasn't enough). I'll see in the next few days if we see any results EDIT: unfortunately the humidity has not dropped as there is no air recirculation in the room where the box is. I'll probably use a dehumidifier. The plants have put on a lot of leaves and are covering up a bit which is why in a few days I will be doing another defoliation. They are starting to smell, very light but you are starting to perceive
Likes
41
Share
11/30: I fed them today and supercropped the taller one a little bit. Just trying to encourage her lowers to compete for apical dominance. I raised the lights another few inches 12/1: I raised the lights about a foot because of a couple of taller plants, so these girls and most of the others are on a platform so as to be within 15 inches of the lights. Their platforms are some of the shortest, and I think they're about to catch up with the others.👍 12/2: Busy with life...didn't do much. Very cold days, so the high temp in the closet was 72f today👈 12/4: Switched to 13/11....afraid of it taking too long to flower and ending up with a bunch of pain in the ass 5-footers..
Likes
27
Share
Final flush done. Turned lights off 14/2/21. Leaving in darkness for 3 days before chop. Room temp 20° humidity 30%. Once hang drying humidity will be 50% and when curing ill be using 62% 2 way humidity packs. Hopefully I'll get some nice dense nuggets. Chopped them week 11 day 6. I'll update more pictures of individual strains when dry and curing.
Likes
3
Share
Likes
2
Share
@godido
Follow
Week 1 — Slow Start, New Setup, and First Plans Strains: Guava Auto & Triton Biscotto Lime Auto Planted: August 25, 2026 Grow space: 60 × 60 × 160 cm tent Medium: Regular pre-fertilized soil Pot size: 5.7 L Both seeds were planted on August 25th and are now slowly settling into their first week. Guava Auto was the faster starter and emerged around 4–5 days after planting. She is currently looking healthy and has started to develop steadily, although growth is still naturally slow at this early seedling stage. Triton Biscotto Lime Auto took a few extra days to emerge. One of the cotyledons looks slightly damaged, but the plant is alive and continuing to grow. I will keep things simple and avoid unnecessary stress while she establishes her roots. Transplant Plan I am planning to transplant Biscotto into another 5.7 L pot that is already prepared underneath the current one. It contains regular pre-fertilized soil as well. The goal is to make the move as gently as possible once the plant is stable enough. I am not trying to overcomplicate the grow with expensive products or a perfect laboratory setup. I just want healthy plants, steady growth, and a good result with the equipment I have. Tent Setup The plants are now in a 60 × 60 × 160 cm grow tent. It is a small space, but it should be enough for two plants if I keep them compact and train them carefully later. The setup includes a COSMOS 120 W LED panel, ventilation, and a carbon filter. I am still learning how to balance light intensity, temperature, airflow, watering, and noise from the extraction fan. Training Plans Later in the grow, I would like to use LST to keep the canopy low, open the structure, and give the lower branches better light exposure. I am also considering trying some HST or topping, depending on how quickly the plants grow and how healthy they look. I have topped a plant once before, but I may train one plant more aggressively and keep the other one simpler, so I can compare the outcome. Goal My main goal is healthy growth and the best yield I can achieve by learning, experimenting carefully, and using the available space and equipment well. I genuinely enjoy the process… setting up the tent, watching the plants develop, testing techniques, and learning what works. For now, patience and stable conditions are the priority.