The Grow Awards 2026 🏆
Likes
Comments
Share
Harvest was nice and buds are dense. Very few popcorns on lower branches. I'm pretty sure this a good genetic strain and i want to grow it again .
Likes
45
Share
@Mtmtc
Follow
Finally it’s harvest time!! I will be drying in a 55% humidity level!
Processing
Likes
13
Share
@ladyjane
Follow
8/10 - In prep for flower I've got some Compost Tea brewing with a little Terp Tea Bloom by Roots Organics. .Also did a little selective defoliation 8/11 - Flipped the ladies to flower today! And all is good in the 8x4. 8/12 - Watered all the ladies with the Compost/Terp Tea. Also did some more defoliation and added some mosquito bits for added pest prevention.
Likes
5
Share
The Ztrawberriez girls have absolutely exploded this week, super happy with their early progress.💚 All three seedlings are off to a flying start, stretching up with strength and vigor. No issues so far, they’ve handled the environment like champs and are developing beautifully. Looking lush, green, and full of promise – can’t wait to see how they take off in the next phase! 🌱✨
Likes
28
Share
Happy Holidays! Week 4 flower and not much to report. Didn’t do anything special, just water from drip, about 1 gallon over 24hrs. Drip turns on 4x during lights on. Light seems to be hitting everywhere fairly even. 2x TSW 2000’s are at about 75%, 18-20” from canopy. I might turn them up to 100% and see how they react for the final push and then turn them down again nearing the end. I will also top dress again soon for the last time. Fungus Gnats are around but I wouldn’t say it’s an infestation, just got to put in a few more traps and I think the “Grub Grenade” is taking care of the soil. There is a 2” layer of straw mulch to help keep them off the surface comfortably. Sour Diesel genetics from Blimburn are strong, thick branching, frosty, sweet & sour smell right NOW, nice internode spacing for light penetration required less defoliation. Thanks for the view! Keep calm and grow on!
Processing
Likes
8
Share
Likes
24
Share
So this was the first time doing lst, and the first time i trained Them was def to early, so i might have decressed my yield pretty much but, theyre doing really fine besides the lack of budsides, and i Think still 4 weeks of flower to get faat, and soo beautiful Colors showing already😍😍
Likes
5
Share
Defoliating more often than expected, plants just fill in the canopy so quick this run. Slurricane didn’t stretch much and stayed on the shorter side overall so I elevated them with a riser underneath the middle two pots. Royal Jelly and PKBR easily doubled in height during stretch bringing them to a little over 3 ft. Heavy water need during the stretch for those two so I made sure to avoid overwatering the Slurricanes which were gentler sippers. All phenos were successfully cloned (my first attempt at cloning). Kept them in the humidity dome sitting longer than I would’ve liked before up-potting but I realized most of my clones were cut too long and were getting strangled from growing by the dome. In the future, ill take my cuts shorter and be ready to up-pot after about 2 weeks
Likes
4
Share
Fire 🔥 she smoked nice. Smooth and got a sexy taste. Overall a easy grown and will try again
Likes
1
Share
@Timmyg91
Follow
Stating next week going to begin lst and using a scrog net
Likes
2
Share
This Week On KeembBoomin The smells are amazing walking into the room no the mention once I actually open the tent, a very sweet tropical aroma at first sniff should I say. In tent 1 on the right there are two Bubble Gums(from seedsupreme) are growing completely different at the bottom right she is very orange but not as frost, but the girl in the back right is not so orange but very frosty. And then there is my favorite Amnesia Haze (Also from Seedsupreme) I always keep one of those girls growing never fails extremely frosty smells like gassy orange citrus and smokes just perfect for me and a nice yield girl for sure last time I got a little over a quarter pound just from one plant Tent 2 Now these plants were me having a little fun as well as testing some strains the see if I will grow again. So I’m the front I have a Peanut ButterPie x Royal Kandy(Won it on 420) this was a grow again I just have to many seed so I grow them 4 at a time, BUT this is the orangest most frostiest MOST dense flower I have ever seen. To the back right I have a GMO Cookies I found the seed in a shake bag from the dispensary I’m not really a fan of the buds are frosty the the nugs are so tiny looks like I’m going to have nothing but popcorn but anyway, And last we have in the back left corner some random bag seed I took off my friend hands cause I could not stand to see it look the way it did I SHOULD HAVE LEFT IT she is so shitty the only thing I like about her is that all her buds look like a amazing shape and size BUT no frost just plant like what????
Likes
17
Share
This week in my grow room has been full of developments. First, I added additional lights because I couldn't get the relative humidity (RH) under control. I ordered a dehumidifier, but it will take a few weeks to arrive, so I had to find a temporary solution. I also emptied the reservoir and refilled it with fresh water and nutrients. I secured the net to ensure it stays in place under tension. In two days, I plan to switch the light schedule to 12/12, hoping the plants will stretch a bit during the switch to avoid having overly large buds that aren't evenly spread. Seventeen hours later, I decided to keep the lights on a 16/8 schedule for a few more days. The plants are starting to show signs of something happening, so I want to see how they develop. I will keep you updated on the progress. Then, I received a message from my supplier that the dehumidifier would arrive today. Great news—time to spice things up! On June 2nd, the dehumidifier arrived, and I managed to get my Vapor Pressure Deficit (VPD) to 1.17! This is fantastic news, and I'm very curious how this will affect water usage. The dehumidifier seems pretty powerful, with water literally dripping out of the hose, so I'm no longer worried about high humidity levels. It's a shame it doesn't have a range setting, but I couldn't expect more for the price. I'm considering ordering the Dimlux Auxbox to set a working range and separate day/night settings. Thankfully, the dehumidifier has an auto-restart function after a power loss. On June 3rd, the night is over, and while my values are now more stable, I haven't noticed any significant differences in water absorption. What I do notice is that the pots seem much drier. The difference in leaf temperature compared to the room temperature has increased slightly, now about a 2˚C difference, indicating that evaporation has increased somewhat. Despite the dehumidifier cooling the air, the room temperature has risen. This is explainable since dry air heats up faster than humid air. The CO2 heater is also running significantly longer. So, although there are no immediately visible differences, there are indeed some changes. Today is the last short night of 8 hours, and tomorrow will be the first night of 12 hours. I am contemplating doing a 10-hour night first and will decide later tonight. After closely reviewing the video footage, I noticed some divergent colors on the leaves. My pH is currently 6.4, which I had adjusted to compensate for the low pH last week—a foolish decision in coco, I know. I plan to make videos of each individual plant for my records to investigate further. The light is too intense to inspect them up close, so the videos will help me get a better look.
Likes
12
Share
So i hatvested them on day 80, they got 24h of light before harvest. I removed all fan leafes with no to verry little trichomes visible. Both plants are now drying by ca. 21°C and 57% humidity. This time i will dry them with lights on to be more efficient with my growing cycles. ( i think they will get at least 2-4 days darkness before the new seedlings move in the box )
Likes
2
Share
Jack is still stretching and she’s loving every minute of it not one leaf deficiency not one stem deficiency or soil.
Likes
Comments
Share
@stashio
Follow
Really easy grow, I just followed the manufactures instructions on lights and fertilizer. I did give the Finale a miss to see if I didn't get fox tailing, I didnt so i'll give it a miss when its hot and see the results. I'm trying the short diary format as I was spending more time filling it in some weeks than looking after my plants but I still like the record to look back on.
Likes
17
Share
@m0use
Follow
This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition
Likes
6
Share
End of week 12 - Day 90 Flower - Day 52 The girls continue to pack on bud weight. I started to open up the buds to let light penetrate some of the side colas. The buds are average 2 inches thick per cola and really packing on some resin. Trichcomes are getting cloudy but no signs of amber yet. Another week or so.
Likes
22
Share
@Hawkbo
Follow
These are just about done, I chopped the first grape god in the 1 gallon bag yesterday. I started the flush way too early because the 1 gal needed it and I didnt feel like mixing separate feeds so I just hit them all. So the leaves are crispy and crinkly but the nugs will be clean and smooth so it's all good just wont get the best pics out of it. I love these little autos they are frosty as hell and have some beautiful buds. The rest will come down this week doing the final flush today.
Likes
12
Share
AutoFlowers at 9 weeks of Bloom, Finishing out Great and Glorious as All get Out, 1st week of Veg Update for my #DivineSeeds #AutoBlueberry and these other Outstanding Genetics! Everything looks Gorgeously Great and looking Beautifully Grown at their 9th Week of Flower! Veg Update on #DivineSeeds #AutoBlueberry #NukeHeads #PurpleBlueberryMuffinCherries-Fem #BubbaKush-Fem and #BlueberryDiesel-Fem breed by Broski #Soluna668 #NoGreedSeeds 5th Feed of #HumboldtCountysOwn #AutoBlueberry Origin:Afghani/Thai Type:50% Indica/ 40% Sativa/ 10% Ruderalis Flowering:56 days THC:22% Harvest:400-550 g/m2 Height:110-150 cm #AutoWhiteRussian and #AutoMontreal *Fems* breed by Team #DivineSeeds #DivineSeedsSquad #DivineSeedsBreedingCompany Looking Magnificent and Amazingly Great in thier 9th week of Flowers! Thier Growing under the #Growatt600w and in my #TopoLite 24×24×48 Grow Tent! I'm also using #TNBNaturals #TheEnhancer Co2 Despersal Canister and using thier Ph⬆️⬇️ for my Decolinated Tap Water! #AutoWhiteRussian breed by Outstandingly Awesome Team #DivineSeeds #DivineSeedsSquad #DivineSeedsBreedingCompany Yo!!! This Lil Beauty popped open in under between 16-18 hours of Germination using this Wet Papertowel Method, this New Heat Mat, Baked potato ToGo Container and Regular Tap Water Helped Tremendously! Heck Yeah Growmies and Growmets!!! Let's Grow!!! DivineSeeds: #AutoWhiteRussian Origin:Afghanistan Type:Indica/ Sativa/ Ruderalis Flowering:65 days THC:24 % Harvest:400-600 g/m2 Height:100-150 cm #AutoMontreal breed by Top of The Line Team #DivineSeeds #DivineSeedsSquad #DivineSeedsBreedingCompany Yo!!! This Lil Beautiful Bean Popped under between 20 hours of Germination using this Wet Papertowel Method, this New Heat Mat, Baked potato ToGo Container and Regular Tap Water Helped Tremendously! Heck Yeah Growmies and Growmets!!! Let's Grow!!! DivineSeeds: #AutoMontreal Origin:Canada Type:50% Indica/ 40% Sativa/ 10% Ruderalis Flowering:65 Days THC:23% Harvest:550-750 g/m2 Height:120-160 cm https://divineseeds.net/ https://instagram.com/divine.seeds?igshid=osxe2v7en33v HumboldtCounty'sOwn: Email: [email protected] Phone: (707) 725-4119 Toll free: (866) 872-9434 Humboldt Bottling Po Box 429 · Fortuna, CA 95540 HumboldtCounty'sOwn Website Link: https://humboldtcountysown.com/ HumboldtCounty'sOwn Instagram Link: https://instagram.com/humboldtcountysown?igshid=1qj809qkkwych I love and Appreciate Everyone!!! Thanks Again Teams! Cheers Famz!!! Much Props and Much Topz!💯