Recommended
Likes
Comments
Share
Temperatura entre 22 a 29C 18/6 fotoperiodo Umidade entre 70 a 85%
Likes
11
Share
Likes
8
Share
@Microsun
Follow
Alright folks! So this harvest was fantastic! I mean! I’m a happy grower at harvest for any plant! I could harvest one amazing and one meh and be just as happy to cut dry and cure them both! This early miss smoked well and is only about two weeks in cure, this is a rank and musky strain with a whole plethora of combining smells, I find it had a massive pepper and spice hit with almost a food like consistency with its smell, I’m finding a even pine, spice, earthy almost cheesy platform with a fine kick of just a odd but interesting odder I can’t put my thumb on! The density of even the popcorn flower is unreal, rocks all of them. A very light almost desert sandy trichome layer in the interior of the nugs but toward the exterior it’s a lush dark green and red hue with purple calyxes also being seen from the top and Bottom inner and some outer calyxes. The trichome production was very impressive also the fast growth in veg was awesome! But I’m telling you! The big bud genetics and the white widow genetics in this are both prominent, and I love it! I’m saying for a auto it’s pretty potent! And not to say that other autos aren't! We all know they can be pretty Damn amazing! But yeah! The flavour is that of pepper and spice! Pine and a gassy greasy fresh herb blend! I wish I had taken more time to run her though because I believe if I had kept running her, her potency would have been a bit higher and definitely would have achieved a more full couch lock. But over all a easy grow and a dense dense grow. I recommend dropping rh and bringing head up a tad at the end to make those nugs as hard as you can! But that’s my bro advice lol
Likes
19
Share
Hi everyone 🤗. The buds continue to grow 😀👍. It starts to smell really good 😍. The bud structure also looks very nice, and is already covered with resin 😎. This week they continue to get 4-5 ml / l water from the Canna Bio Flores. I hope you enjoy the update, stay healthy 🙏🏻 and let it grow 🌱😃 You can buy this Strain at : https://greenhouseseeds.nl/ Type: Wonder Pie ☝️🏼 Genetics: Wedding Cake x OG Kush 👍😍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0
Likes
Comments
Share
@Bpsb4_2
Follow
Дефки отрастили корни и переехали в горшки) Тутанхамон начал активно набирать после увеличения базы до 3 мл/л. Растем...
Likes
2
Share
@PINUFLA
Follow
Día: 78 Riego: 1,5L x Pl. - Agua Día: 81 Riego: 1L x Pl. - FinalFlush 2mlxL Día: 83 Riego: 1L x Pl. - Agua
Likes
12
Share
@Sieben
Follow
All looks healthy and i can´t wait to see the next weeks pass 😁 . After my vent made me mad and started to hang i found a nice vid on YT about the "Fan Wars" and cause i disliked waiting, now he is in: Spider Farmer Vent , i love him ! , next one will be AC Infinity from the US , but this one is already pro quality 😎.
Likes
17
Share
Last week of veg, starting 12/12 tomorrow as I'm starting to worry about space.. hopefully stretching isn't too much of an issue.. we shall see. I'm still not happy with my defoliation, I've been mostly removing large/damaged leaves and sucker branches off the bottom of the plants. I've been experimenting with the fan and scrog placement, placing one large fan oscillating below the canopy and two clip on fans above the tops and mostly using the scrog as a support for branches during flower as I somewhat failed to actually scrog.. Once again, any advice much appreciated and happy holidaze!
Likes
10
Share
@Prop207
Follow
Sugar leaves getting sugar. Nugs getting nuggie 15 sb 15 cm 30 PBPB Deez
Likes
24
Share
Started the first few weeks spreading the plant out by hand a few times a day, After transplanting from a 3 gallon pot to a 7 & as the center started to bush I went further into training and tied branches around the pot with soft garden tie. Foliar feed a lite blend of Rhino skin & Flower kiss with a fine mist a few times a week as well as spinning the pots to promote even growth, vigor and IPM Eyeing up to cut a few more clones to take before flip + cleanup lower canopy / defoliation🌱 BuildASoil 3.0 soil is organic input only.
Processing
Likes
35
Share
Want to thank @Humboldt Seeds for working with me to answer questions about me unusual pheno! Gracias, gang! Every once and a while there is a genetic 'throwback'. Wish I'd have cloned the one from last grow! We'll see what this ASD is like. Displaying more indica like traits than sativa, although it is 80% sativa. This will be a cool grow! The clones are hanging in there! It's been 6 weeks of vegging under an LED bar. Can they keep going for another 4-5 weeks? I hope so! Will do my best! One of the two BHB clones will be transferred from soil to DWC at 10 weeks. The adjustment period will be slow. About a week, I figure. If successful. I will have solved my 'Have no way to veg' quandary. Will build a bubble cloner for the next batch. Blueberry Headband (2) and a Amhest Sour Diesel (1)from Humboldt Seeds. * Even though the ASD seedling is much different than the other ASD that I've grown, HSO says there's not a chance seeds got mixed, so I'm assuming that this pheno is more on the Amherst Super Skunk side of the lineage as was a seedling last grow. Love the pheno! Much different than the others. https://www.dinafem.org/en/blueberry-headband/ https://www.dinafem.org/en/amherst-sour-diesel/ Lighting https://www.horticulturelightinggroup.ca/products/260w-qb-v2-led-kit Soil Amendments for Blueberry Headband Soil https://www.gaiagreen.com/product-page/all-purpose-4-4-4 https://www.gaiagreen.com/product-page/glacial-rock-dust https://www.gaiagreen.com/product-page/mineralized-phosphate http://www.seasoil.com/ Worm castings Sunshine Mix #4 Epsom Salts Molasses Teas made from Gaia as well as in the soil and top dressing. May use General Organics BioThrive 4.3.3 https://generalhydroponics.com/biothrive and Alaskan MorBloom 0.10.10 https://www.planetnatural.com/product/alaska-morbloom/ DWC Nutients https://generalhydroponics.com/floraseries FloraGro FloraBloom FloraMicro Diamond Nectar https://generalhydroponics.com/diamond-nectar Cal Mag https://generalhydroponics.com/calimagic Epsom salts
Likes
8
Share
This was a easy strain to grow and was never picky with my Amateur ways... She had a very strong smell that was Dominant over my huge Purple ghost candy.. I use my own soil now that has been worked over by my Worm Farming.. I also use worm castings every week spread on all of my plants.. Also every couple of Weeks I make a homebrew Tea for all of my plants with Alfalfa, Molasses, Worm castings, Seeweed with the Salt washed off..
Likes
7
Share
The cookies is doing well. There's a lot of bud sites. The photos are at day 21 of flower.
Likes
24
Share
Day 21. Major LST adjustments with some defoliation to expose bud sites. Looking excellent. Day 24. Supercropped a few branches. Don't be afraid to do it. It's how I build monsters. Day 27. Starting to preflower. Continuing with LST and HST. Will give her a good feeding tomorrow.
Likes
12
Share
day22 video. now adding more pk booster than earlier weeks, should be done week 7-8 we will see day23 I start adding more pk, still will 4x more pk now. Some nice pics today, videos of each, frost on fan leafs, no issues other than pros: bridal frost on fan leafs+sugar, cons 6ft tall. I think I should have pumped more pk earlier into flower/pre Its cool. Adding 2tbsp soluble pk into 5gal vs quarter tbsp in beginning 22 days ago. I am feeding soluble pk, +3 pk soil conditioners and carbs every day. There is no water day. day 25 stacking up. been spraying old cs I made 3ish years ago to test, works on unrooted so I may potential cross. Bridal starting to smell like a mix between fresh watermelon, and lemon+lime or a citrus aroma.
Likes
51
Share
@Waveform
Follow
Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.
Likes
92
Share
🌸 Week 3 Flower – Growing Strong, Tall, and Vibrant! 🌱 Hey Grow Fam! It’s already Week 3 in flower, and I’m thrilled to bring you this update because these plants are doing phenomenally well! Some are stretching up so tall that I might have to get creative in the coming weeks! Fruit production is well underway, and it’s absolutely amazing to watch the canopy fill out as these girls reach their potential. Aptus Holland Pack Unboxing & New Additions This week kicked off with a big arrival: the Aptus Holland nutrient pack! 🙌 I couldn’t wait to share the unboxing with you all; there’s a video up where I go through all the goodies, so check it out if you haven’t yet! Between the photos and videos, you’ll be able to see just how well these nutrients are already feeding these green beauties. Having a blast sharing more content lately—I’m in the zone with editing and creating, so get ready for even more shares! 🌡️ Environmental Control and Fine-Tuning the Reservoir pH Temps this week have been holding around 27.2°C with RH at 65.2% and CO2 at 800 ppm, creating a VPD of 1.26 for ideal flower development. The lighting intensity is at 833 PPFD, and the solution in the reservoir is fine-tuned to a pH of 6.22, EC of 475, with a temp of 21.8°C. Let’s talk pH in the reservoir: it’s a dynamic process, and I’m constantly adjusting it to keep everything at the right level. The pH tends to rise throughout the week, and each day, I work it back down, fine-tuning it to keep those plants happy and balanced. Managing pH is truly a hands-on job, and it’s worth every moment. I love staying on top of it for optimal nutrient uptake—it’s all about consistent effort and keeping that perfect range dialed in. Leaf Maintenance & Selective Defoliation These leaves are HUGE and gorgeous, creating a lush canopy that’s nearly too perfect! I’ve been taking a few leaves here and there, focusing on leaves that may be blocking light from reaching lower parts of the plant. Selective defoliation at this stage is key because it opens up airflow and allows light to penetrate deep, boosting energy distribution across the whole plant. Big, healthy leaves mean we’re getting excellent photosynthesis, but a gentle, strategic defoliation can guide that energy toward those developing buds. Leaf removal is all about balance, giving the plant space to breathe and thrive while still maximizing growth in flower! 🌐 TrolMaster + App – Real-Time Precision Huge shoutout to the TrolMaster system and the app—keeping everything in sync and at peak performance is honestly effortless with this ecosystem. The app provides a full overview of each environmental parameter, allowing me to make real-time adjustments as needed and track trends over time. The precision here is unbeatable, giving me complete control over temps, humidity, CO2, and VPD, ensuring my girls are in a controlled paradise 24/7. What I love most is how the app records everything automatically, so I always know exactly where things stand without having to keep separate records. If you haven’t tried TrolMaster yet, it’s a total game-changer for any grow setup! 💥 Shoutouts & Gratitude Massive shoutout to TrolMaster and Aptus Holland for powering this grow with tech and nutrition that’s second to none. And, of course, gratitude to Pro-Mix for the superb growing medium and to the seed banks behind the genetics. We’re running strong thanks to each of you. And to the whole community—thank you, everyone, from new friends to seasoned followers, lovers to haters. Your energy, whatever form it comes in, is all part of this journey, and I’m so grateful for it all. Special shoutout this week to my brother Daggadna—head over to IG and give him a follow! And if you’re loving the journey, remember to like, comment, and subscribe—it really helps the channel grow and reach others who may also dig this content! Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚