The Grow Awards 2026 🏆
Likes
22
Share
@Limez
Follow
Hey guys, did some defoliation yesterday because it was Flower day 21. I got rid off the lower branches and flowers with little to no chance of receiving enough light. I snapped off the leaves which were looking a bit old. I’m pretty happy with the result, since it is my first grow I didn’t know how or how well it will go. After defoliating her I gave 5L with around 20ml of Hesi root complex to help her get fit after the operation. I feed her once a week with bloom nutrients 50ml / 10L. I also attached new wires to the twigs to continue with the LST and to improve light penetration. So far no problems and I’m pretty happy. Also I haven’t smoked weed for 3 Weeks now and I am excited to wait till harvest with my break. If I trust sensi seeds she needs around 50-60 days to complete flower, so let’s say we have 1/3. My SanLight evo 4-120 is running on 80% power which is 212W and I have 30-35cm distance to the canopy, depends on which buds you measure. Thanks for reading. Have a nice day
Likes
Comments
Share
Week 3 and I can consider these seedlings now officially in the vegetative stage. Growth is on track and looking great! Weekly watering with nutrient feeding every other day to run off waste and using a shop vac to clean up. 5.8 ph / 1.59 ec / 75.6 degrees
Likes
7
Share
Just starting to take off full nutrients feeds it’s getting see how it goes from here
Likes
7
Share
Mittlerweile sind alle Pflanzen voll in der Blüte. Alle zwei Tage wird gegossen. Den kleinen Ventilator habe ich durch einen großen 40cm/50W ersetzt. Der hängt verkehrt rum an der Decke und sorgt für eine Luftzirkulation. Besonders in der Nacht wenn die Luftfeuchtigkeit auf 80% geht. Der Geruch wird etwas intensiver. Ein wenig LST wende ich noch an. Die Bieger lasse ich aber höchstens 2 Tage dran. Keine Lust das mir ein dritter Seitentrieb abbricht.
Likes
31
Share
@Dunk_Junk
Follow
Day 63 - Flowers just starting. They're looking nice. Through the week I've chopped quite a few leaves off her to allow light penetration.
Processing
Likes
4
Share
Likes
5
Share
Likes
24
Share
@AutoCrazy
Follow
Week 6 This Lady is up to 8 tops😎. Now I just have to get each top in the right locations at which point I’ll let them get a few nodes taller and then flip. This Lady is growing a little slower than her roommate (A Mimosa EVO) so I left a few extra fan leaves on her in the hopes that will speed her up a bit. I have noticed that this plant seems to throw the two main branches at a node but it also throws out additional branches. I’ve had a plant do this before and in my experience it makes the buds denser. We will see how it goes with this lady. Cooler internals are: 6.0 pH 0.4 EC 56 F solution temp. I can’t wait to flip the tent !!!! 🔥🔥 Onward 😎🍻
Likes
14
Share
@Hg91uk
Follow
Thinking of pulling this whole run at this point, the stems are in a bad way and general structure has really suffered. FIM'd both girls this week & gave compost tea(ecothrive biosys) to aid recovery. Will make a decision on growing them out depending on how they respond. (Update end of week.) So in the first week these girls stretched terribly, instead of riding it out and letting them adjust I tried a trick I've applied with tomatoes in the garden and coiled an inch of the excess under the surface and covered it. After a burst of invigorating from the microbe tea(biosys) these girls seem to be recovering from the stress fairly well. The only down side, the stems have broken the surface and left me with these crazy bonsai style stems & the girls are very short and bushy, concerned the stems won't hold any weight later in life.. Will give this another week and make my decision TLDR; Don't interfere with nature when you can help it, especially with autoflowers. Update day 28 from sprout. Bbk1 showing signs of nitrogen toxicity after perking up, I had to use the bottle measure last week instead of a syringe. Much less accurate so assume this is the cause, just ph water for a while. Bbk2 perking up slightly. I did think these girls looked a funny shape and now I can see the stem properly its starting to make sense 🤦‍♂️🤣🤣
Likes
14
Share
@BLAZED
Follow
Week 14 (1-5 to 7-5) 1-5 Temperature: 28.2 degrees (lights on) 22 degrees (lights off) Humidity: 62% (highest) 46% (lowest) No pictures. 2-5 Temperature: 29.2 degrees (lights on) 20 degrees (lights off) Humidity: 61% (highest) 48% (lowest) Removed the net, and tied down some branches to the pot with some gardening wire. This way i can easily remove the pots out of the tent to weigh them. I also moved the oscilating fan from underneath the canopy to above the canopy. This is because the leaves gets hotter as i increase the light's power output. The Gorilla Kush #2 and the Chemdog #2 are showing some heat stress. Installed a valve on the autopot from the Kush #2. This is because its weight is higher then the other pots. Before i watered them i weigh the pots. Dry weight: Gorilla Kush #1: 4.4 kg Gorilla Kush #2: 6.0 kg Added 10L to the reservoir. Opened the reservoir for a couple of minutes. 3-5 Temperature: 26.2 degrees (lights on) 19.9 degrees (lights off) Humidity: 61% (highest) 47% (lowest) No pictures. Increased the light's power output to 75% LUX: 16.000 / 20.000 4-5 Temperature: 26.9 degrees (lights on) 21.2 degrees (lights off) Humidity: 59% (highest) 41% (lowest) Opened the reservoir for a couple of minutes. 5-5 Temperature: 27.6 degrees (lights on) 21.2 degrees (lights off) Humidity: 60% (highest) 47% (lowest) No pictures. 6-5 Temperature: 27.6 degrees (lights on) 20.4 degrees (lights off) Humidity: 60% (highest) 42% (lowest) Dry weight: Gorilla Kush #1: 4.4 kg Gorilla Kush #2: 5.4 kg Added 10L to the reservoir, there was still 2850 ml left in the reservoir so now its almost 13L. Opened the reservoir for a couple of minutes. (Only Gorilla Kush #1) I also lowered the Gorilla Kush #2 a little bit, as she is showing some heat stress. The bud development of the #2 is very mediocre, some buds show some THC, and some buds have almost none on them. I am sure the yield will be low, so i will probably make some hash with the #2 7-5 Temperature: 27 degrees (lights on) 19.8 degrees (lights off) Humidity: 57% (highest) 44% (lowest
Likes
17
Share
@RakonGrow
Follow
**** HAARVEST ZOE **** Nice Strain , My little Zoe really made all the mistakes you could possibly make. No matter when I give light or want water or fertilizer. It grows and grows and grows, the main thing is that there is light. It was one of my free seeds from Zamnesia. So far all seeds have germinated. I store my seeds in a dark, airtight container at 6°C. Tastes kind of sweet after curing. Greenhouse Feeding is a really easy fertilizer to use. I used the BioEnhancer again and again. My little Zoe thanked me. The BioGrow was used as topdressing and is doing its job. The BioBloom also does its job at the right time. And that's really great and easy if you don't have an autoflower. Of course there is a corresponding product. But I was happy to get anything here at all. Legalization has wiped out the market. But for next time I have an appropriate soluble fertilizer for fast-flowering plants. It doesn't work for 8 weeks :)) I use a Sanlight Evo 3-60 1.5 with Bluetooth dimmer. There's nothing to complain about there. Set daily cycle via app. Helpful if the weather or environment is so bad that you have to regulate the light intensity. 33g after 5 days dry . 24.5 °C to 22°C with 50%-60% . curing in a vaccum box at 18°C . It looks like I'm drying too long. // It tastes a bit crunchy. Day 79: trim , slow vacuum box to cure 22°C and 61%rH . Day 76: videostuff: been drying for 4 days (res 640x480) ( optical zoom x200 - x250 ) Day 72: DLI usage total this Plant : 2236.6 DLI in 70 Days . wet trimmed, cut off, hung upside down. see you after 14 days Day 71: preparing for harvest . 24h long night session . DLI : 0 Day 70: - Sanlight DaylightCycle - + ON 200PPFD (00:00) - 800PPFD (03:30) - 800PPFD (16:30) - 200PPFD (18:00) OFF video and photo tryouts with the digimicro mobil x300 optical zoom , mostly freehand Day 69: - Sanlight DaylightCycle - + ON 200PPFD (00:00) - 1000PPFD (03:30) - 1000PPFD (14:30) - 200PPFD (18:00) OFF incredibly hot and rain. lost some terpene :)) Well, summer is coming, Day 68: - Sanlight DaylightCycle - + ON 200PPFD (00:00) - 600PPFD (00:30) - 800PPFD (03:30) - 800PPFD (14:30) - 600PPFD (17:30) - 200PPFD (18:00) OFF - Added 1L bottle of water It's hot, hot, hot, Zoe would like more water. changed daylight cycle so it match the weather problems. tent is open until my real night comes. 103 flowers (including popcorn) counted, due to an accident about 15 flowers are missing. Day 67: - Sanlight DaylightCycle - + ON 200PPFD (00:00) - 600PPFD (00:30) - 900PPFD (03:30) - 900PPFD (14:30) - 600PPFD (17:30) - 200PPFD (18:00) OFF - watering bottle water 1.75L weather to hot , changed daylight start time and daylight cycle so it match the weather problems. I'm lucky, buds are still growing :))) Day 66 (we are on the road with maximum sanlight ) - analyse some trichome . - make some Zoom Pics and Video stuff . - Sanlight DaylightCycle : - + ON 200PPFD (00:00) - 1000PPFD (00:30) - 1000PPFD (13:30) - 800PPFD (17:30) - 200PPFD (18:00) OFF - DLI will stress alot ... Anyway, it's too hot in my room... I open the tent and now everything is fine with the temperatures and I increase the Sanlight to 100% for the first time. May Zoe love it or leave it :)) We'll see what happens Day 65 : Sanlight DaylightCycle : ON 200PPFD (00:00) - 800PPFD (00:30) - 850PPFD (13:30) - 800PPFD (17:30) - 200PPFD (18:00) OFF It will soon be ready for harvest.
Likes
29
Share
She is getting bigger and fatter. Her 6 main colas are shaping up beautifully. They're getting massive! The heat is bad and she is suffering. All her upper fan leaves are dying. We've gota a couple of weeks to go, so we'll see how it goes....