Soaked the seed in water for 36 hours then popped into a Grodan cube that was pre-soaked for 12 hours in pH 5.8 water. First sprouted 24 hours later and has been growing fine in the propagator under some cheap LEDs until I get her into the net pot and tent soon.

Giovedì 17 ottobre switch a 12/12 Prossimamente cambieremo soluzione. Rinnoverò anche tutti i nutrienti con la fase vegetativa e loro continueranno a crescere fino a che iniziamo a vedere i prefiori e cui di ricambierò l'acqua con la soluzione e adatta, al momento tutto apposto! Venerdì 18 ottobre 2024 Svuoto la vasca, cambio soluzione. Partiamo da 75 lt acqua demineralizzata ec 235 ph 9.5 Aggiungo tutti I nutrienti indicati ottenendo ec 1318 ph 6.2

Beginning of week... She is doing her thing.. Slowly but surely lol.. Healthy as far as I can tell.. Maybe the reused coco is too reused? Idk. There is a bit of coco/perlite from my first grow in there lol.. Some others too.. But she is still truckin along.. Went up on the Armor Si (Silica) and a little on the FloraGro.. She does look like she is gonna beginning flowering very soon tho.. Pistils are forming slowly.. Much like the rest of this grow.. But she is starting.. I'm not going to start counting flower till I actually see that she is flowering.. Stretching and all.. That's how I like to count flower.. Always seems to line up perfectly when you count flower that way.. Even with photoperiods.. Not from the 12/12 flip because there is still 2 weeks of transition. Anyways.. Another week in the making... Next day... So my Mars Hydro is crapping out. I have to drop it down to 20 inches from the canopy and run it at 75%.. So pissed.. It glows when it is powered off and still plugged in.. And if I turn it on while the power is set to 100%.. It just blinks until I turn it down to 75%.. I can have it set to 75% and it will turn on like normal.. But I need to use 100% power.. And Mars Hydro sucks with responding to emails apparently.. I'm gonna have to buy a new one and return this POS.. Then hopefully buy a new stronger light for my 2x2.. I am so pissed.. Mars Hydro sucks.. The build is amazing.. The components are awesome when they are not flawed.. But damn this is the 3rd light to crap out on me in 2 years.. I do nothing but run them 18/6 or 12/12.. Run 1 fan on top at the driver and heatsink and 1 under toward the diodes.. Nothing different.. I think I'm gonna buy the Wakyme J-2000.. It comes with 2 fans blowing on the heatsink.. Honestly, noise is not an issue to me.. Heat is.. I sleep with all my fans running already lol.. Its actually hard to sleep without them now hahah.. But yeah. It has a Meanwell driver.. Samsung diodes.. Dimmer.. And the fans.. I think it's my best bet at this point.. Fuck Mars Hydro.. They had 3 chances with me.. My Sunraise 1000 (blurple) is like 4 years old and still running strong.. Smh.. Mars Hydro is crap. How did they even get so popular??? I'm sure more people will realize how crappy they really are.. No name brand everything.. Runs hot as ass.. Craps out after 3 - 4 months.. So so pissed... Almost mid week.. I went ahead and pulled a couple branches down a bit.. The canopy is perfectly even.. It looks AwEsOmE! Lol Mid week.. Well, she seems to be doing a bit better than before, I'd say. Normally, my previous autos would be flowering and probably almost finished stretching by now.. Live and learn.. I hope all the Zkittlez Autoflower seeds aren't like this.. And hopefully this strain turns out pretty dank to be wasting a few extra weeks on growth but not getting much growth at the same time.. And I hope harvest doesn't come quicker than the swelling of the calyxes.. But shit happens.. I have Mars Hydro sending me a new driver/dimmer. I sure hope it's just "plug-in" because if I'm going to take this light apart, I'm just going to go with the Meanwell HLG-240H-54B.. From what I was told from LEDSupplier dot com.. The 240W would be better due to the different current. We are still trying to figure out if the dimmer is 0-10V to see if I can just keep using the Mars Hydro dimmer along with the MeanWell HLG-240H-54B.. That would be cool.. Sorry but Mars Hydro sucks.. I bet running a different driver would help alot of issues.. Maybe even run cooler. Anyways.. About the plant lol.. She is doing great.. The stiples are still showing some weird colors on the tips.. Doesn't seem like an issue.. Some plants have the stems change colors.. Some have pistils change colors.. Some have leaves change colors.. Maybe that is just in her genetics.. The pics that ILGM shows, it should be a pretty colorful strain.. Guess we shall see! But she is happy and healthy.. I think I'm going to stop using Hydroguard next week.. Just doesn't seem like it's doing much of anything.. I really only bought it to fight root rot when I attempt DWC which I am going to attempt again very soon.. Maybe after this grow... We shall see... Almost end of week.. Went ahead and defoliated/lollipopped a bit. She was getting too bunched together.. She is nice and opened up now.. 2 side branches stayed pretty short.. Not sure what that is all about.. Flowers are slowly forming at this point. Next week will be week 1 of flower and stretching should begin! She is still getting good light even with the power only being at 75%.. Just have it down lower.. Which I could get away with till harvest.. But fuck that. I ordered a new Mars Hydro TS 1000.. And Mars Hydro is also sending me a new driver/dimmer box to replace the old one.. Going to return the light and I still want to replace the stock driver with the MeanWell.. Trying to get more professional opinions before I attempt that tho.. So far, I am hearing to get the HLG-240H-54B.. The 150H (150W) doesnt have the correct current so I'd have to go with the 240H (240W) due to the output current and voltage to match correctly. Can't wait to try it out! End of week.. So I got a new Mars Hydro TS 1000 in.. It comes with a Moso driver instead of the old Juson driver.. Hmm.. Ok.. Seems to not heat up as much.. The diodes still get hot, but the lack of the driver heat should help keep things cool.. Nice... I am able to raise the light back up and run her at 100% power.. I went ahead and tied the branches down a little more.. There are 2 that are still staying a little short.. But I think it's the way I started the whole LST process.. I should have tied down a different 90° angle instead of the angle I used.. But live and learn.. Wont use that way again lol.. Other than that, the flowers are forming nicely.. Happy happy happy.. Next week will begin flower! Niceeee.. On to the next!!!...

Cosecha finalizada, fue una de las mejores plantas que e tenido, su aroma fuerte a menta y pegamento invadió toda mi casa, ni hablar del tamaño mounstruoso

Creciendo fuerte!

For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

So far so good, eager to have the auto flowers finish up so I can focus on the photo period. Both auto flowers are being fed full strength with big bud powder added as well. Trained the photoperiod with plenty of lst hoping to start flowering her in 2 weeks max

As week 5 came to a close and we move into week 6 of flowering, I am having really high hopes for the end result. The buds started to get some light orange hairs which is really nice and they are really starting to thicken up! Towards the end of week 5 the plants started to show early signs of burn on their leaf tips, so I started the week 6 feeding a little early. In week 6 we bring the EC down quite a bit as we get into the late stages of flower. I also recently switch to measuring with EC vs PPM for ease and accuracy. Also at the end of week 5 I did a calibration on my coco for each plant as week 6 nutrients are much lighter. Coco Calibration Method 1. Mix up nutrients. 2. Water plants as normal and measure runoff. 3. If runoff EC is not at or close to the inflow EC a. Water more and keep measuring runoff until the runoff is at or close to the inflow EC 4. Do steps 1-3 for all plants (One at a time) Tips: - I use a shop vacuum that I stick the end in the bottom of the pot saucers and leave it on while I water so it sucks the runoff as soon as it drains out the pots. Then I measure, empty and water again until I hit my targets) For this calibration, I ended up using around 6 gallons of nutrient solution. Watering technique used is to measure runoff at every watering and make sure we are staying as close as possible to the inflow EC. It does not matter how much water you need to put through the pots to get to the desired EC on runoff as that is a benefit of Coco. My main goal is to keep my runoff in check and the plants seem to do better than I have ever grown before! The smell off these ladies are amazing and strong. I don't have a carbon filter and enjoy her smells and aromas all day long as my desk is right next to my tent. There were no issues in Week 5. Plants continue to look amazing and the buds are continuing to bud up and structure very nice! I'm excited to see the end result after the ripening and flush stages. Also the colors that are soon to come! Stay tuned! ______________ We are 5 days into week 6 and the buds continue to grow fatter and fatter on a daily basis. I'm really dialing in my EC and making sure to mix it at 1.1 EC and making sure my runoff is from 1.1-1.4. I started playing with the mix as I am getting used to the grow schedule and how the base nutrients effect the EC. I have found that doing 50% of the low strength calendar hits me right at my target EC and I don't have to dilute my mixture after. The smells continue to be strong and fill my house up. The weight is starting to make the colas lean over which is nice because it's opening up the canopy to get more light in. I'm very excited to see what the buds look like in week 7 and then we are on to ripening stage, flush, and then finally harvest!!

Day 84 Week 6 flowering

Well day 64 here I believe shes ready in my opinion. A little early but I switched her to 24 hour lighting a week ago and had her out in the sun the last 3 days. Today she basks in the sun in all of beauty and wonderful aroma. This strain is without a doubt the most gorgeous to me and the smell is outstanding! Check back next week for a flavor report and my review of the strain! She should dry for me well in a week sadly a severe drought here so I'll be keeping it hanging whole. Check back next week to see how she tastes & her mesmerizing array of affects! Remember its 4:20 somewhere!!!!!!

So out of my girls this time this strain is my favourite! Reminds me of runtz muffin as I've discovered it has critical orange punch and the main terp that stood out on the runtz muffin was the orange punch! I'm so excited and happy to have something like this in my grow! Look at her structure she is so vigorous and bonus bonus clones are this strain! So I have 4 plants off this 😁😌 I have zero complaints, everything is next to perfect! Light is at the very top top in my 180cm tent makes me feel this will be my best one yet!

Nachtrag weil vergessen. Die Seifuku wurde getoppt, weil sie eh etwas Vorsprung gegenüber der Sour Zoda hat. Das Living Soil geht gut ab und beide wachsen gleichmäßig weiter. Bei der Sour Zoda wird noch etwas gewartet mit Training, dann wird bei ihr gezielt ein Blattpaar entfernt, um so einen buschigeren Wuchs zu erzielen. Bei meiner Red Velvet hat das super funktioniert, mal sehen, wie sie es findet. Gegossen wurden beide mit ungefähr 1,5 L auf 3 Tage aufgeteilt. ---- The Seifuku was topped since it already had a bit of a lead compared to the Sour Zoda. The living soil is working really well and both are continuing to grow evenly. For the Sour Zoda, training will be held off a little longer; then a specific pair of leaves will be removed to encourage bushier growth. That worked really well with my Red Velvet—let’s see how she responds. Both were watered with about 1.5 L spread out over 3 days.

Plant grew out doing its thing , med feeder can handle rough conditions and heat ! Great for beginners

Week#15 GSC BY KANNABIA Week #15 Feb 15th-22nd This week she is doing great 👍 you can see her OG kush heritage with her tight buds and almost florescent white hairs.

🌱 Autoflowers Woche 1 🌱 In den ersten 7 Tagen passiert Magisches! ✨ Die Samen keimen und die ersten kleinen Blätter (Keimblätter) zeigen sich stolz. 🌱💚 Wichtig: Licht: 18-20 Stunden täglich ☀️ Wasser: Feucht, aber nicht nass 💧 Temperatur: 20-25°C 🌡️ Halte deine Babys glücklich, und sie wachsen wie von Zauberhand! 🌿✨ #Autoflowers #GrowJourney #CannabisLovers

Last 10 days I worked with LST to get the plants more homogenized.

Ladies are looking good, I’m liking not having to pull tarps to have flower this early…. But the quality isn’t quite there. My dad is flowering gdp auto and runts auto indoors. They are a lot smaller but a lot prettier. I’m sure my temps have been the root of all my problems. Wishing the buds would fill out, they are getting runny and larfy. Well I have a few more seeds for next year but I’m thinking autos are not for me. I have started to see some botryis and have been cutting it out. Mainly seeing mold on the two hermies, but also seen some aphids on one of the hermies I got mad and cut it down! Then I poured gas on the infested bud and burned it…. Growing is not for the faint hearted;)

I flushed them on day 48 with straight R/O water No more nutes, hoping to get a good 10-14 day flush Swelling more and more each day, getting more and more frosty each day

Been a nice productive week for this girl, she's getting the girth and the swell is setting in, she's starting to smell rather nice, can't wait to see the trycomb production in the coming weeks 😀 happy growing and stay green ✌️ 💚 👌