Likes
Comments
Share
Well the plant in flower is DANK AF!!!! Then theres 1 lagging behind it and then the shorty and tall boi are both just now starting to flower. I feed then the same feed as last week, I might kick up bloom a bit later this week, but I think the plants are happy and really besides the lag and yellow leaves they are some gorgeous looking plants!!!! great node formation! lots of tricomes and lots of flower!!!!! I think this bud is gonna be RICH!!!! ____________________________________________________ Defoliated the little guy, it should help. I'm just sorta holding in this "flower" feed.
Likes
41
Share
I love this lady. She smells insane. It won't be long till there's more room is the tent for her to spread out some. Will likely tie her up at that point. She is just huge. A little while to go for her yet. It can't come quick enough.
Likes
11
Share
Hello guys ! new week and an amazing week ! Told you she was working on her buds and now you can see all of them. It's the perfect moment for a small defoliation in order to increase the focus of the buds. You can see the videos Before and After. I will have to add bamboo stick because the buds are starting to be too heavy ! she is gonna start to show her colors next week I think. Hope you enjoy Take care Sawyer
Likes
15
Share
@Elmike
Follow
Baignade de 12h avant d'utiliser la technique du verre d'eau avec essuie tout. Ma façon favorite pour partir mes graines.
Likes
4
Share
@rkomaaa
Follow
A lot of trouble in this round. The problem with the heat contributed to them stretching, and then of course heat stress -.- one of them gave me 20g while the other one 124. I fed them all the same, they may have succumbed to other stress, who knows...
Likes
37
Share
@Aedaone
Follow
The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil spread evenly across the top of the soil. Day 1 we had high temperatures of 79° and skies were mostly cloudy. The lows at night have begun to drop below 60°F. It has been extremely humid with tons of dew in the morning. I'll continue to defoliate and spray with biofungicide to get this powdery mildew under control. Day 2 we had early morning rain followed by mostly cloudy skies. High temperature was 77. The rain took care of the watering today. I'm treating with arber again and more defoliation. Day 3 we had a high temperature of 81°F, skies were partly cloudy, and I watered 3-4 gallons from the hose. Day 4 we had a high temperature of 83° with sunny skies. I watered 4-5 gallons from the well. I treated with Arber. Day 5 we had a high temperature of 88°F. Skies were clear and sunny. The humidity was around 90% today. I watered 4-5 gallons from the well. I finally got most of the infected leaves off and have one more plant to do tomorrow. I treated with Arber again today. Day 6 we had high temperature of 89°F. Skies were sunny. I watered about 4-5 gallons with well water. I've been treating these with Arber biofungicide but it's hasn't had much affect. I stripped all the infected leaves and lollipoped two today. I'll get the third tomorrow. I'll treat these tomorrow with growers ally fungicide and see if they can be saved. Day 7 we had a high temperature of 86°F with partly cloudy skies. We're expecting rain tonight and it's super humid today. The weather is not cooperating while I'm treating for powdery mildew. This week was a success. The plants gained on average 6 inches in height. They've slowed down their upward growth and are transitioning into flower. The weather has been atrocious for cannabis. These girls are super healthy but the humidity and cool nights have caused perfect conditions for powdery mildew. I began treatment with Arber biofungicide, but it wasn't doing much. I lollipoped and defolated heavy on two of the plant and finished the third after photos on day 7. The non infected leaves are responding ok to the Arber. I'm switching now and will treat late day 7 with Growers Ally fungicide. I defolated pretty heavy, but I expect a full recovery and increased production as there will be more light penetration.
Likes
18
Share
Great to grow - defoliate like a champ. Check out the sea of beam on thegreenleopard.com Twitter going wild for it - really nice addition to grow space - would take this strain to the moon - check out the light combo - world wide !
Likes
14
Share
~ FASTBUDS TESTER #2202 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/1- I soaked both seeds for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged roughly 24 hours later. 12/3- Today their tap roots were about 1/2 to 3/4" so at 11 am I transferred them into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph using a tine off of a plastic fork as a 'mini trowel' to make a hole in the pellet and to gently cover the tap root, leaving only the seed head slightly exposed. This method accomplishes most of the initial work the seed has to do by eliminating having to orientate itself, push it's root down and head up. By 10pm the #1 seed had her cotyledon leaves opened and the #2 isn't far behind! 12/5- Well this is the full Day One for the #2 FBT #2202 and the second day for her sister! I'll keep them in the covered/heated Jiffy tray until I see their roots beginning to emerge from the peat pellet, then I'll transfer them gently into their respective fabric pots. The #1 will be going into the 4g Gronest pot from FastBuds and the #2 will reside in a 3g pot by Wraxly, which I'm trying out for the first time. 12/7- Yesterday I checked the #1 tester and she had roots starting to emerge from her pellet so I transferred her into her 4g Gronest pot. After making a hole in the medium for the peat pellet, I coated the entire surface with Xtreme Gardening Mycos then placed the pellet in the hole and planted her in. Lastly, I watered her in with about 4oz of de-chlorinated water with 3ml/g of FishShit added which was then ph'd to 6.4 @ 75℉ after which I placed a humidome over her for 24hrs to ensure that the humidity stays constant. The #2 tester is doing great and I'm confident that she should be ready to transfer into her fabric pot in the next couple of days! 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙
Likes
5
Share
* Week 1-2 of Veg, thus far everything is moving accordingly. Everyday clean water feeds, every other day nute feeds* 2 New nutrients introduced this week.
Likes
80
Share
Hi all. Welcome to this run withbthe Viparspectra XS1500 which i was kindly sent to try by their helpful rep Valerie. As I have a fairly good space to use for my main grow , it seemed an ideal time to explore a few options while I wait for space to appear following upcoming harvests. The opportunity hit at a good time and has now driven the future play time. lol The light is a full spectrum 150W( at the socket) , Dimmable and very well made unit. As summer is here now , my concerns of more heat being an issue have stopped me from adding my other light so the smaller 2ftx2ft area covered by the XS1500 is a good option , The heatsink is built into the case design with a finned top to dissipate the heat so no noisy fans. Switching it on to full power was a nice surprise as the footprint was way wider than I had expected and the actual coverage is even better for my Nursery to harvest plan.... I am growing autos perpetually at present and have been able to throughput the plants with just 2 lights and using the overlaps at the edges to bring seedlings along to veg/flowering, as harvesting is finishing. The timing had been working well but the plants were getting smaller towards the last runs . I gave it some thought and Rh % came to mind. With the perpetual runs not having a higher rh in their veg periods due to other plants needing a lower Rh% in flower , the vapour pressure deficit (vpd) was not within veg periods healthier range. This current run has exploded and filled my normal space very quickly which in turn means I cannot use the same principle as the last perpetual run of bringing the next ones along ready for the exchanges. The XS1500 takes care of this issue with it being perfect for an initial nursery light that is easily covering all the new seedlings but is also able to cover my experimental "5 plant 1 Pot" attempt. I have placed 5 of my own autob seeds from a previous seeding in a single 60 L pot and intend to strip them to their 4th nodes and only allow 2 mains per plant to develop and flower. Inam hoping to have 10 mains growing in it that will be under the xs1500 solely as the other plants outgrow the lights footprint and space they are in. They will go into the main grow space once able so i can really see how well this new light can flower with the 10 mains to fill the space. Until that point , I will diary as we go and see what we can achieve.
Likes
18
Share
@Dunk_Junk
Follow
Wow she leapt for the sky this week! Grew another 38cm this week!!! Over doubled her height!!!!! Look at her weird split stems!!! Very strange.
Likes
1
Share
Likes
16
Share
@valiotoro
Follow
A wonderful genetic thank you Fast Buds ❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin 🤤 I’m very happy with the harvest 142g !! For the light i’ve used the Mars Hydro SP-6500💡
Processing
Likes
2
Share
Likes
5
Share
@Bazem
Follow
Estou mantendo essa é a primeira semana depois de germinar,espero que de os frutos que é prometido por seeds kkkk tmj galera
Likes
23
Share
@Athos_GD
Follow
D20. I got rid of the plant in front right. The plant wasn’t growing fast or getting much light because the other two plants stretched a lot. I am actually running out of room and had to already lower my tray.
Likes
11
Share
Likes
26
Share
@DreamIT
Follow
-Sponsored by: 🏡GANJA FARMER SEEDS🏡-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 8/7 After several days of Growdiaries making it difficult for me to write and respond to comments, I found that I can still update the journals. I apologize to everyone for the non-replies but I have replaced the main email and the email to confirm the account never arrives, and Growdiaries' customer service seems to be non-existent. 10/7 everything is going well, nothing special to add🤘🦄 12/7 all right, we are two weeks before the cut, yeah __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Huge collection of exquisite genetics since 2009! Anonymous shipping! ✅https: //bit.ly/Ganjafarmer __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟
Likes
3
Share
Best autoflower ever,you might not like the flavour because everyone has his own preferences but nothing beats this one in terms of potency