Hello! Week 4 is now complete so go take a look! Day 29: Flowering has begun. Day 30: I've been keeping Enigma moist. Day 31: She's looking a bit happier. Day 32: More and more pistils. I am not sure what to expect from her stretch but it has started. Two weeks or so usually and 2x or 3x height. I doubt she will do that but it'll sure be interesting to see what happens. To be honest she is already bigger than I expected her to get. Height is 25cm. Day 33: Height 26cm Enigma is flowering away. Day 35: Height 27cm. Week Summary: Enigma has stretched out quite a bit this week. I expect more of that next week. She's super thirsty. She has gained 10cm this week, quite a difference. If she does the same sort of stretching next week she might end up being 40cm by the end of the week. Imagine that a 40cm plant in a pot that isn't 8cm tall.

Looking great!! Super purple

Just watching her go…

Man I really don't think there getting all the sun they need seem be growing slow Idk learning just have to wait and find out I wish I could just plant in the back yard this so stressful can't be there like I would like to bee sadly

Hola a todos, al fin comenzó el periodo de engorda, ya van 3 días en las que la planta dejo de espigar, esta semana aumenté la dosis de PK a 0.7 ml/l, ajuste un par de ramas para dejarlas bajo el foco, los cogollos ya están repletos de tricomas (adjunto fotos), la próxima semana ya estaremos viendo cogollos mejor formados, ya debo comenzar a pensar en mantener la humedad a raya, he notado puntos de estrés en zonas de más luz, la planta esta consumiendo más agua así que aumente la cantidad de riegos diarios (170ml cada 3 horas). Hasta la próxima!

Wow the smell in this tent hits you in the face like a sack of lemons if life gives you these kind of lemons you take em and smoke em 🍋🎄🤤

Week 3 of flowering has started! More defoliation and loolipoping is going on and is passing the surface of the SOG... buds keep fattening, although this light is very poor I think inhave mentioned that before!!

These babies are rocking!!!!! Lollipopped up to the last 3 nodes... Pretty evenly spaced thru out... Going to give a 1/4 strength flower nute and regular veg feed and some recharge and then I'll be Flipping to flower next week! 😁 I hope I remember to update... Update* pictures are lollipopping, topping, defoliation, and training em to a pretty even zone... Gave food last night (March 30 today) and put a quarter dose flower food and they loved it! It's going to be flipped in the next week

D71 - SEP 22: Looking and smelling great. Haven´t seen much growth since the last 5 days or so, but it fattend up really well and it´s really dense, insanely dense. Thricomes developing, soon to be harvested :) D72: Now it´s time to mature, I don´t see any significant growth, only thricomes developing. No watering, it still has a lot. Humidity is really high these last 2 days, being around 50 - 70% rH. D73: No watering yet. No signs of any more thrips, thankfully. Seems to have fattened a little. D74: Maturing well, thricomes getting mostly cloudy and amber. No watering, tomorrow probably. D75-D77: Been a little off of GD for these past days. The tent is looking good in general, no thrips anymore, temps and rH are good. Watered with nutrients on day 76. Thricomes are really close to harvest and I´m really impacient but I´m trying to wait for it to get more amber 😄

1 day of the year 2022! :) -------- 20 hours, glass of water in a dark space. PH 6.05 EC 0.33 After 20h I'll place the seed into the paper towel. day 2 -------- after 20h I placed: seed -> wet paper Towel (liquid from glass) -> added Great White -> placed Towel to the plastic bag -> wrapped in foil -> put in a jar for 2 days (dark place) day 3 -------- coco buffering by BioBizz CalMag 3.5 ml/l (10L ) The humidity and temperature sensor stop working. Ordered new one day 4 -------- received new T/H sensor. Something wrong with new sensor, short circuit of temperature electrical line. Ask my friend to repair.... day 5 -------- Start of Vegetation period. Placed seed to small pot. watering AN Base A + B (0.33ml/l), Voodoo(0.33ml/l), Great White (1/4 tsp) Manual temperature control, to many activities.... day 6 -------- The plant sprouted from a coconut in 1 day! watering AN Base A + B (0.33ml/l), Voodoo(0.33ml/l), Great White (1/8 tsp) Manual temperature control, to many activities.... day 7 -------- My friend finished repair of T/H sensor, I installed it back to the stealth box, everything wok perfect! Very low H inside the box, around 25%. humidifier from china was broken a month ago :)

Fotos del cuarto día de la tercera semana de floración. Todo marchando correctamente, han estirado bastante las plantas estás tres semanas desde que cambie a 12/12. Las plantas tienen el promedio 80cm de alto

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/21/20 😻 We're documenting a day early because we'll be gone for a weekend camping trip...The plants are progressing beautifully and perpetually praying, they're absolutely loving this new MarsHydro! We decided to move the light from 24" to 30" to try widening the nodes a little before dropping back to 24", we're in unamended Promix so we typically start thinking about feed this week but being autos we're going to take it slow and wait on color ques before making that move (probably next week for sure)...thanks for reading and happy harvests everyone!! ❤️💡🌱😽💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 10/25/21 😺 We gave all plants a very, very light feeding (<3ml/gal) to see how they tolerate it, its super early but a few were already beginning to wash out ..We started bending plants today, low stress only for these girl and everything looks great so far! This MarsHydro is intense, the node spacing is extremely tight on all plants and growth has been really steady (especially these last few days), we couldn't be happier! Thanks for reading and love all around growmies!! 😻 ❤️💡🌱.. ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Still just a baby. Slowly watering the soil and foliar spray plain water

This week will be the last one for these babies, already started flushing them with water. Plan to continue so for 2-3 more days until reach around 700-600 ppm and Bob is your uncle. It was my first experience with auto flowering strains. It gives much less amount of products comparing to photo, but less stress as well, easy growing, plants are quite are unpretentious. Let's see how potent they will be.

10/16 #1　 Drying　Day3 #3　Curing　Day33　＠boveda62% #4　Curing　Day36　＠boveda62% #Clone☓1　Curing　Day28　＠boveda62% #Clone☓3　Curing　Day16　＠boveda62% #Clone☓5　Grow 1ml / Bloom 3ml/l Max 3ml/l = 1l　　 #Clone☓4　12/12　short-day Day39 Grow 1ml / Bloom 3ml/l Max 3ml/l = 1l　 #Clone☓3　short-day Day6

She grew great. A few problems but all on my end. Everythig was great responded to topping well. Alot of puple leaves and orange hairs. the buds look lovely and smell like mashed blueberries. not incredibly strong but i imagine that will change after a bit of cure. Super happy with the way she turned out. Dry weight coming soon. will definitely be growing this one again soon.

Ended up flushing Mumma for about 10 days - got her ppm down real low. Night before harvest I set the timer so the light would not come back on in the morning before I harvested (I've seen people who swear by this and other who say it doesn't do anything but figured it couldn't hurt). At this point the other plants are pretty disappointing compared to Mumma so they aren't getting as much "love" lol.

Drunken Bitch Slap is growing great under the Hortibloom Solux 350. She did a lot of stretching in last week. She is just starting to shoot pistils for the colas. Everything is looking really good, and ready for some flowers. I have done some selective defoliation is all the training I have done. Thank you Hortibloom, and Aeque Genetics. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Stems are getting top heavy, more weight packed on and they are starting to lean, I don't have room for a scrog net. Pistils are turning amber, only about 10% so far on day one. I hand plucked off the small larfy, sucker buds. I let some go too long and the large majority are worth keeping. Next time I will have the courage to defoliate properly! I get so scared after weeks or months of growing and then removing growth. Final day of week and these colas are stacking on so much weight they are bending over. Noticed nutrient deficiencies and tried to adjust accordingly. Hoping the problem doesn't get exacerbated.

RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea