💩Holy Crap Growmies We Are Back💩 Well growmies we are at 35 days in and everything is going as good as can be 👌 👉 Sadly I'm thinking I may have something wrong with my Medium as i am having issues with all my girls this time around👍 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Dec 23: Day 73 from seed. There is a lot to say about these girls, they have been a breeze from the start, 2 plants started producing pollen sacs early flower but I infer that was external, and they were eliminated. The flowers are beautiful and the product to description is very close. The smell is very close to freshly pressed rosin, very fruity and pungent; I see why this strain is a cup winner!

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

Week 2 of flower for Space Panda Shes showing some signs of starting to stretch. Pheno 2 is still in veg but will be putting her to flower next week, if i feel like shes healthy enough.

-

I‘m not sure if this one feels happy. I see quit a lot of leaves with three feathers or even only one. I don‘t understand here for example how much water she needs. The two plants in small pots drink the morning and evening dose of water. After ~ 12 hours they need water. And this one, it’s in a bigger pot, only drys out at the surface after maybe four or five days.

Top! Questa settimana è stata fantastica tutte le piante hanno strecciato in maniera uniforme! Fantastico con delle auto Le mie piccoline hanno patito 4 giorni di caldo con temperature sopra i 30°! Ora ho sistemato l'areazione e la temperatura va al massimo sui 28°! Ho incrementato la Co2 leggermente, in modo che le piante superino bene quelle ore di caldo! E sembra che stiano bene tutte! A voi il giudizio

Lower leaves started turning light green / yellow . I flushed with 4-5l of water, the runoff was dark LOL maybe nutrient lockout started. Good thing I caught on early Day 5 since the flush, the soil is soaked, but there’s no new yellow foliage!

11/12/2020 She getting funky (good) smells under flourecent light. One more week, then back to LED under11-14 to finish her off. 11/14/2020 Did a little defoliating and my fingers smelled of Skittles candy combined with earthy minty-ness gonna be interesting I think. Also switching to LED tent early, I want her under full spectrum for last couple of weeks as she puts on some weight. I'm hopeful she will finish under 70 days but not harvesting till she is done! 80/20 cloudy/amber😎

Die Blueberry ist noch einmal um 20 cm in die Höhe geschossen. Die Selbstbewässerung ist großartig und kann ich nur jedem empfehlen. Das Substrat ist immer gleichmäßig feucht, selbst direkt unter der Mulchschicht. Es gab diese Woche den Booster von Green House Feeding (0,4 g auf 1 l Wasser) direkt in den Untersetzer. Als der 1 l getrunken war, wurde wieder mit circa 3,5 l Wasser nach gefüllt. Das Wasser ist natürlich PH angepasst auf 6,2. Ich werde diese art der Bewässerung garantiert bei jedem nachfolgGrow anwenden. Ganz langsam entwickelst sie ihren Duft. Und so wie es aussieht und wenn nichts schiefgeht, müsste es eine schöne Ernte geben. 💚💚💚

My second growroom is built and the girls have moved in. Medical Mass is a new medical cannabis strain with a high CBD content and a low THC level that provides good medical properties without a strong psychoactive effect. This is a mostly indica plant that contains 40% sativa and 60% indica. Critical Mass and CBD rich strain were crossed to create this amazing valuable variety. The plant suits both for indoors and outdoors, for beginner and experienced growers. The strain grows up to 60 - 100 cm tall and produces good yields for such height of about 500 - 550 gr/m2. The plant demonstrates great results even in small spaces. The flowering time takes only 7-8 weeks and the harvest comes in late September. The smoke brings very strong, intense flavors with sweet notes of honey and skunk and an intense pleasant relaxation. Medical Mass is the great choice for each medical user due its small height, ease of growing, fast flowering and of course great medical potency. ---------------------------------------------------------------------------------------------------------------------------- 2017-10-20. Week 6 day 3. Late update. The girls are in there final 12 liters autopots and have moved into my newfixed second growroom. The girls is growing fine and have been Fimmed. Girl 1 is 41 cm Nr2 is 34 and Nr3 is 32 cm tall. Added videos and pics. Grow room Nr2 is 1.75 meters x 1,05 meters and its 1.92 meters high. Im using 1x 140 watt Apollo led 4 and 1x 370 watt Apollo led 10.

Welcome Back!💚 Die Sleepy Joe ist nach 56 Tagen Blüte nun Erntereif! Die Trichome alle samt milchig und es gibt einige Bärensteinfarbene. Ich denke ich habe den Peak gut erreicht. Das Aroma ist Kräftig und wirkt ziemlich ausgewogen zwischen etwas süßlich fruchtigen und dann doch etwas stechendes Gas artiges. Heute wird geerntet! Die Umgebungsgegebenheiten sind aufgrund des nassen Wetters etwas anders. ————— 🌞 Temp: 24°C 🌚 Temp: 18°C bis 19°C 💦 RH: 56% 💨 VPD: 0,98 kPa 😎 PPFD: 830 mqm ————— Grüne Grüße 🥦

Smell of the plant is amazing. Smells like red Berries. Buds got huge and medium dense. I only harvested the 3 main buds as they are developed the most. The rest of the plant can stay for one more week. I Also removed some dead leaves.

Amazing!! Ya buddie!

12/22/2021 Starting the over night soak in H2O2 water, then onto soil mix to finish germination. Soaking in H2O2 and water, about an ounce h2o2 mixed with .500ml spring water. It aids in breaking down seed shell, and sanitize seeds at the same time. I will sow directly into soil as breeder suggest. 12/25/2021 All I5 seeds sprouted in water little 1-2 mm tap roots, potted into small cups and reppot as necessary, should get 100% germ rate if I don't hurt them tiny tap roots putting them in soil. 12/28/2021 Lemon OG 100% germ rate, Biscotti Skunk 4 of 5, Grape Skunk 4of5,and I will take the blame if others don't take because of miss handling, so very happy with the germination rate I'll give it 100% Thanks @QCS for given me the opportunity to grow your genetics.🙏🏻 Ps. ROJI OGS will go next round I'd like to do them alone I think she will be special. Biscotti Skunk Biscotti Skunk Cannabis Seeds Feminized With a noteworthy lineage, Biscotti Skunk is a mix between the Cookies variant and Kush on one end, acting as the base layer for flavors and effects, while the Skunk addition rounds it off beautifully on the other end, creating Biscotti Skunk a totally unique marijuana strain. This strain works good indoors or outdoors it produces nice big buds. The flowering period for her is 8 to 9 weeks Outdoors this plants will be ready to harvest at the beginning of October, and offer yields of around 700g per plant in ideal conditions. The effects you can expect from Biscotti Skunk strain are relaxation with a good creativity boost, followed by a gradual energizing body feel. A bud with a very complex flavor profile, this indica-leaning hybrid Skunk come from planting 50 Skunk F2 seeds and one of the fenotip came out looking like this. We liked the strain so much that we have finally duplicate the strain. Grape Skunk is one of those tangy, tropical smokes. Her flowers give off the unmistakable scent of tropical citrus, with some accents of grape. THC levels is between 20% and 24%. Grape Skunk is a large producer under optimum conditions. A dense cannabis plant with pink purple colors. Growing Grape Skunk cannabis is easy and great for first time grower. This strain is also great for relieving stress and anxiety, as well as reducing chronic pain, nausea, and insomnia. Lemon Og Kush Cannabis Seeds Feminized This strain joins the OG Kush genetics, with strong Indica and physical effect, cross with a Skunk plant which has a very distinctive and special lemony flavor. The result of this crossing between these two robust genetics a plant with similar structure than the OG, average internodal distance, columnar structure that can branch a little more if the plant has enough space and substrate. Still, it mantains the average height of the OG Kush , producing lots of flowers in relation to its average size. Production can reach 550g/m2 in about 8-9 weeks , which will allow us to harvest our plants before the rainy season arrives, without worrying about molds: it is a mold resistant marijuana strain. Regarding the flavor, it huge amount of resin and terpenes will release a strong fuel and lemon smell, which is noticeable even when we smoke, reaching every corner of our palate. Moreover, its effect is very medicinal , ideal to eliminate nausea and stimulate appetite, deeply relaxing both body and mind. Lemon Og Kush Cannabis Seeds Feminized This strain joins the OG Kush genetics, with strong Indica and physical effect, cross with a Skunk plant which has a very distinctive and special lemony flavor. The result of this crossing between these two robust genetics a plant with similar structure than the OG, average internodal distance, columnar structure that can branch a little more if the plant has enough space and substrate. Still, it mantains the average height of the OG Kush , producing lots of flowers in relation to its average size. Production can reach 550g/m2 in about 8-9 weeks , which will allow us to harvest our plants before the rainy season arrives, without worrying about molds: it is a mold resistant marijuana strain. Regarding the flavor, it huge amount of resin and terpenes will release a strong fuel and lemon smell, which is noticeable even when we smoke, reaching every corner of our palate. Moreover, its effect is very medicinal , ideal to eliminate nausea and stimulate appetite, deeply relaxing both body and mind. It's obvious I get regular seed at this point. But feminized information was all they had on website,assuming it's all the same.

8/24: No deficiencies, no pestilence, no major issues with heat or humidity....just SO MUCH EASIER than trying to grow outdoors in summertime...😁 8/25: Was gonna feed today, but they aren't dry enough yet. Keeping it cooler in the closet has it's drawbacks... I'll do a foliar feeding with Microlife Maximum Blooms tonight and probably feed them tomorrow. 8/26: I fed them 8 gallons in total today, so that's a little under a half-gallon each. Hopefully they'll dry out a little quicker so I can get back to my normal routine. 8/27: Rotated the edge plants 8/28: Ogled them a bit... 8/29: I sprayed them at "dusk" with Microlife Maximum Blooms and did a little rearranging after removing the 3 autos from the closet. Now, each of the 15 plants has a little over 1 sq ft to itself...

La plante a fortement jauni cette semaine et des taches sont apparues Flo 23: Arrosage eau Flo 24: Pulvérisation de 3ml de Vita Race

It's looking great, hope they continue to grow that well.

Chugging along. Seeing stretch but it’s not an issue. Budlets everywhere. Gonna do another small defoliation here in the next couple of days.