FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Harvest day 72 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚. Unfortunately, the rating system at Growdiaries is a bit strange because I have to give the stars before the Smoke Report and in the end it might have led to more stars in terms of taste. The growth was great from start to finish. She had no problems at all and also had no problems with animals 👍. I'm amazed at the great smell the beautiful buds give off😀. Of course I cut cuttings and if the taste is as good as the smell it will be grown again ☺️. A final report comes with the Smoke Report. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

It was also the last week for Bubblegum, who had some problems at the beginning and therefore took longer than the others. At the beginning of the week, she was given a thorough flush, then left to dry, and at the end of the week, she was given the usual two days of darkness. Despite the difficulties at the start, it was a very good result.

Meine Woche war sehr gut, ich habe um getopft nun ist sie nicht mehr in den Becher und hat ein bisschen mehr Platz um sich auszubreiten. Ich habe heute wieder enhancer benutzt auch hier habe ich wieder von den 1 g die vorgegeben sind ein wenig auf die Oberfläche gestreut und nach gegossen. Wenn Sie die gewisse Größe erreicht hat werde ich auch diese toppen und so weiter machen Ich denke sie sieht ziemlich gesund aus in den nächsten zwei Wochen bekommt sie noch mal eine Düngung ab der siebten Woche mache ich das wenn die Wachstumsphase mehr wie acht Wochen beträgt Auch diese wird von der neuen Lampe die ich als Unterstützung die sie auch bei meinen anderen Grow Report sehen können bestrahlt ich probier das einfach mal aus. Lg

More pistills showing everywhere! 😍 day 61: everyone is female, except for 2 plants, and it is not one of the big ones 😁 hasn’t shown male signs either day 63! Everybody has a pussy! All females in my beautiful garden now! 👩🏼☠️️

Gelato 44 is doing great, she is coming closer to make some beautiful flowers and I will use some stakes to stabilize her a bid, the weight of the flowers will be pushing her over I think. Plant turned out beautiful so far, great trichome production and an incredible smell. The feeding stays the same for now, I just added some Bio Grow from RQS.

Hello, This plant is not as big as her sisters but the buds are pretty tight.. Has been a easy plant to grow and I look forward to watching her finish! Have a great day😎

Chugging along. Have had some moisture issues in the tent- pooling water on the floor. Added another fan to keep things moving plus reduced the temp at which the exhaust fan blows one degree. That seemed to help. I’m a little worried that the buds seem so small this late in the game. I’ll officially ask a question about this later, but I have been having a lot of condensation inside my tent. That’s because it is in a cold part of my house. And though I do have two fans running and the temp is set low, the condensation is running down my walls and under my floor tray. Not a huge issue except I tried wiping down the walls today and bent a pretty good bud stalk. Not sure if it will keep growing or if it will be an early sacrifice. But, bummer all the same. Also, I figured out that I was a week off. So, just starting week 8.

Week 11! Another two liters of nutrients for her this week. I think I’ll start the flush next week. This lady is covered in trichomes and seems to have filled out a bit. The buds are still pretty airy, but they definitely look better than they did at the start. Another week is just around the corner! Stay tuned!

thanks for the comments guys ! im switching to 20 hour of light tomorrow

End of the third week of transition and the hot mess is rounding out nicely👌. We’ve got an extra pots worth of space freed up so we spread em out a little and tied the super tops back down again. Probably for the last time as we wait for em to bulk up through mid flower. Per the video - we kept as much foliage as we could and we’ll move to straight maintenance and pruning from here on out. What’s interesting is that every single one of these clones is perfectly healthy. This is in stark contrast to the mothers growing out seed in the tent next door. Half of those are showing deficiencies of some kind. A telling comparative between to different hydro methods. Coco is an imperfect method imo and every plant always seems to react a little differently. Dutchies, well…. They speak for themselves😉👌. I expect yield will be much heavier on this run than originally anticipated. This is the way👍. Background This cycle of clones represents all the potential of this F1 line of WalkerBerry OG. Bred by myself over the last couple of years. This genetic shows excellent hybrid vigour, incredibly stable nutrition requirements to date and an eclectic mix of long and short internodal spacing bu specimen. We know we have indica and sativa dominant traits spread evenly across the 6 available clones. Now it’s just a matter of seeing them run out under controlled and pollen free conditions. We’ve labelled each plant and it’s resulting seed accordingly. Once we get to the F2 run, we’ll hopefully be able to isolate down to 2-3 phenos if the bud is any good. From there, who knows. It’d be great to get to a finished, stable generation that would be fem worthy but that could be a very long way off. For now - we’ll focus on this line and see where it goes🤞🤞.

April 20-26 This week was a Frost explosion. Smells like you just walked into a candy store. Resin coverage extends into the fan leaves and the trichomes are a solid milky white. It's probably moving from the bulking phase into the ripening phase. I regret not doing any defoliation because the lower buds aren't where they should be but fine. 5 gallon pot in 2x2 is not enough space to bend branches to the max. I'm still satisfied.

What a fun run this was ! These Ogreberrys finished up from 81 days to 102 days with nice hints of gassy , sour purple , sweetness and glistening with frost! These ladies will cure up for a month an will be ready to test out ! So much fun , I highly recommend this strain if your looking for some oooy gooohy resiny grape smelling nugs !

Clones got transplanted into my organic recycled soil in solo cups and under the dome. Under 300w LED QB dimmed at 50% Watering with tap water. My live soil is packed with nutrient's and minerals so there’s no need to add nutes for now.

Week 8 of Flowering. I think in 9-13 days i Harvest them. Trichomes get Browner everyday. Woche 8 der Blüte sind im Endspurt. Wahrscheinlich werden die in 9-12 tagen geerntet.

Strong vegetative growth with vibrant green fan leaves and tight node spacing.

So I have decided to only note when changes are made, observations are warranted, or I feel something of note has happened. I'll still do daily progressions, but the rest has already been documented and no need to create a hundred new pics showing the same. Just understand that if I say "7.1ph," or something with tested amounts that I mean I first calibrated and tested my ph pens and all units are measured for accuracy. I am learning as I go, so it would be of no benefit to report inaccurate details. 112/42 VPD and PPFD are still the same this week. 73-76F in the day and 66-68 overnight with RH set to not exceed 55% but is mostly at 45 to 50% now that winter is here. The fan is set to auto and I have 2 de-humidifiers in the tent. The PH lockout issue is still in progress but I am starting to get the soil up to snuff now. I think using the knitting needles has the most beneficial effect on the soil as it both aerates and allows the nutes to get deeper. 113/43 Defoliated today. I removed the worst of the affected fan leaves and this unfortunately only leaves sugar leaves to run photosynthesis process. Im hoping she still gets enough of everything else to grow the buds, but only time will tell. I will take new control pics for new progression on 3 other sites now. Watering Days. All feeds with nutes use either a whole ratio, or combination, of "Veg Mix" and "Bloom Mix"concentrates. These are/will be DILUTED in water until a total ppm of add-in is reached using a (Total Dissolved Solids) TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added-in larger, then smaller, ratios while the "Bloom Mix" concentrate will eventually replace the "Veg Mix" concentrate entirely. The ppm and ratios will be listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Last feed was day 110/40 (next will be +3) I expect to continue to use 7.1ph with 650ppm of bloom mix concentrate and feed 2.5 gallons every 3 to 4 days, so I expect about 8 to 11 cups of runoff at that time as well. I have decided that I will try to add 1 ml of CaliMagic (General Hydroponics 1-0-0) per gallon of feed on each feed for a week or two to see if this can help against ph lockout of calcium since it cant be N,P, or K. Cant be N because she uses WAY less N in flower, and it cant be P or K because I am getting nute burn with the feeds I am already using... so my conclusion is that she need more micro nutes from the lockout, and since I was thinking it was Calcium in the start, I am going to try a more detailed treatment to test results against from here. Day 113/43 (last feed was day 110/40) Tested and Calibrated my ph pens. Fed 2.5 gallons of purified water (starting with 16ppm) mixed with 658ppm of 100% Bloom Mix Concentrate. Due to this soil showing a possible calcium deficit, I am starting a 1ml per gallon add-in to test on all plants using this soil, so I added 2.5ml of CaliMagic (General Hydroponics 1-0-0) to the feed then I ph balanced before feeding. The ph on this feed was balanced to 7.1. I used knitting needles to help both aerate the soil and create new water pathways for the roots. (a practice I may consider a new feeding standard for all my plants) I got ~7 cups of runoff (~11 cups last feed). Higher runoff volume was expected with the feed volume but glad to see she's taking it better now since I started knitting needles. Runoff was tested at 6.12ph and 2250ppm (5.9ph with 1860ppm last feed). Top soil tested at 6.23,6.31,6.57,6.38 for an avg of 6.372 (6.327 avg after last feed) - next feed will be 7.1ph again as I'm still liking where the ph is finally going, but rather see it closer to 6.3 or 6.4 top and bottom. I dont see any issues with the feed's data other than the possible calcium deficit and I will continue to monitor runoff ppms as I expected this to be lower with less runoff but have to consider they maybe washing out salt with the knitting needles. Next Feed should be 3 gallons of de-chlorinated tap water ph balanced to 7.1 in +4 days (117/47). I will run 650ppm and 3ml of CaliMagic (General Hydroponics 1-0-0) again. Day 117/47 (last feed was day 113/43) Tested and Calibrated my ph pens. Fed 3 gallons of de-chlorinated tap water (starting with 299ppm) mixed with 671ppm of 100% Bloom Mix Concentrate. Due to this soil showing a possible calcium deficit, I am starting a 1ml per gallon add-in to test on all plants using this soil, so I added 3.0ml of CaliMagic (General Hydroponics 1-0-0) to the feed then I ph balanced before feeding. The ph on this feed was balanced to 7.4. I used knitting needles to help both aerate the soil and create new water pathways for the roots. (a practice I may consider a new feeding standard for all my plants) I got ~20 cups of runoff (~7 cups last feed). Higher runoff volume was expected with the feed volume increase might let her go to 4 days again and 2.5 next feed. It could be a result of the knitting needle treatment when feeding. Runoff was tested at 6.10ph and 2070ppm - again thinking it could be a result of the knitting needles (6.12ph and 2250ppm last feed). Top soil tested at 6.23,6.31,6.57,6.38 for an avg of 6.372 (6.372 avg after last feed)- next feed will be 7.1ph again as I'm still liking where the ph is finally going, but rather see it closer to 6.3 or 6.4 top and bottom. I dont see any issues with the feed's data other than the possible calcium deficit and I will continue to monitor runoff ppms as I expected this to be lower with less runoff but have to consider they maybe washing out salt with the knitting needles. Next Feed should be 2.5 gallons of de-chlorinated tap water ph balanced to 7.1 in +4 days (121/51). I will run 700ppm and 2.5ml of CaliMagic (General Hydroponics 1-0-0) again.