Hey guys :-) It's about time that space in the flowering tent becomes available because the ladies are getting extremely bushy and big 👍😂. was poured this week 2 times with 1 l. Have fun and stay healthy 🙏🏻💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.thegratefulseeds.com/shop/feminized-seeds/one-shot-edition/zhead/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

05/07 500ml of water each pot, PH 6.3, nutrients like schedule 05/08-- You can see a picture who show the differences among the flowers. No one is like the others. Same genetics, same food, same growbox... #1 has the biggest flowers, looks like very similar to the #3 #2 has the most covered in trichomes flowers, looks really frosty and snowy! #3 has the smallest flowers but remember, this plant is an experiment, I've topped at 3rd node and folded all the branches down continuing to top them, so it grew more slowly, underwent a lot of stress and flowering started later. For me was a success, let's see how it will end. I'm a beginner and my skill grows everyday with my plants. 05/09 500ml of water each pot, PH 6.3 with 4ml bio-bloom + 4ml top-max + 2ml overdrive + 1ml b52 + 1ml nirvana 05/10-- In the last 2 days, all the flowers being FAAAAAAAT, now #2 has the biggest, heavyest and most dense buds, totally covered in snow, this strain it's impressive. Now I'm curious to see how they grows in next days!!!! 05/11-- 05/12 500ml of water each pot, PH 6.4 with 4ml bio-bloom + 4ml top-max + 2ml overdrive + 1ml b52 + 1ml nirvana 05/13 -- This is last day ofweek 12, tomorrow startthe last day of life for these plants. I will start flush and in next 7-10 days I willchop down all my lemon's plant.

Last week of feed for this lady :) Update end of week nine , Well the bud production this week has been absolutely crazy , She has now slowed right down on her feeding too , so the flush begins , she still needs too cloud up and go amber but she will have enough nutrients in her and the soil too last her until she ripens , she really has been a joy too watch grow and develop , I would not think twice about growing this strain ,

All went steady! Re-Adjusted my Fan positions & velocity! Full 900W running again - Lights were moved further from canopy to decrease leaf temperature. I pruned some affected leaf tips/fingers Pest & Mould prevention H2o2 Lets hope for the best

Ok this week she grow very well! Im lproud of her!! See yuo soon next week guysss!!

Transplanted into a 0.5 l pot before the final transplant...💪🌱🍀😁

Vamos familia, actualizamos la tercera semana de floración de estas Black Rainbow de Seedstockers, salieron las 3 de 3, 100% ratio éxito. Aplicamos varios productos de Agrobeta, que son increíbles para aportar una buena alimentación a las plantas. Temperatura y humedad dentro de los rangos correctos dentro de la etapa de floración. La tierra utilizada es al mix top crop, por cambiar. De 3 ejemplares seleccioné los 2 mejores para completar el indoor y trasplanté directamente a macetas de 7 litros, cambien el fotoperiodo a 12/12 y aplique una buena poda de ramas bajas, se ven bien sanas las plantas, tienen un buen color y progresan a muy buen ritmo por el momento, ya empezaron a formarse las flores. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

June 14th not a ton happened, I believe I watered them (It seems I am having to water every second day now as they start to get bigger) June 15th - still just growing away. I went out and got some different ducting so I could pull air from outside better with the ac infinity inline fan. I also received some insulated ducting from Amazon that is a hell of a lot better then the standard stuff I am using. I also grabbed a new 9 inch fan (still deciding the best place to place it, for now it is beside the door). I grabbed a larger oscillating fan aswell to keep air moving around. June 16th - decided I would do some lst and then I gave them some water. I have been feeding nutrients every second day. I have also on every 3rd watering been doing just ph’d water. The humidity seems to drop quite a bit within 10-20 seconds of the door being open hence the lower reading. I am sitting roughly at 45-55 depending on time of day. As for temperatures I’m still struggling to keep it down during the warm days and it seems the highest I am getting is around 29 since switching the lights off from 11am - 5pm June 17th - the girls seemed to have perked back up after yesterday’s lst. Not much new today just some growth! June 18th - Unfortunately I forgot to take pictures today. But not to much difference. I did feed the girls with some nutrient water today. June 19th - I again forgot to take pictures. They are just growing away and doing there thing. I did check for growth from the topped portion on the bigger plant, no growth from one of the 2 tops. So I indeed cut it to low… I won’t be doing that again haha. June 20th - finally grabbed something to deal with the heat since it is getting hotter everyday. I picked up a 10,000 btu air conditioner. I have it set at 23 degrees. I also moved the plants around and re-arranged some stuff. I took the inline fan that was taking air out and instead the ac output is going to there. I ended up having to make the vent into a 6inch vent on the trailer. Temps stay around 23 now. Humidity is still 45-55 depending on time of day.

The plant is now focusing 100% on bud development and trichome production

Die Pflanzen kommen jetzt in die 5. Blütenwoche. Der Gorilla wird schon schön Harzig und ich bekomme schon Appetit auf die bevorstehenden Ernte 🤤 Auch der Duft im Zelt ist stärker geworden und die Filter haben gut was zu tun.

Smelling strong got a lil crispy on some tops but looking real good overall a pretty maxed out 5x5. It's gonna be a trim fest.

She's done!!!!!!!!! 😎 😍 Harvest in 24h.

Just finishing up week 3 of flower. Did another defoliation on day 21 but you can’t tell now...lol everything’s been rolling along nicely so far. Been feeding them around 8 gal of water every 2-3 days. Well that’s it for now, easy growing so far! Cheers 💨

Hola !! Time too try new toys 😃 Building my first dripping system EVER And would running :runner: 16 O.G Kush from ZenSeeds. in 11L pots with Plagron LightMix and 20% perlite. Here's some pictures from the DIY and testing, and today 25-3 they all coming up, so I count this at day 1 Hope it's okay 👌🏼 all the way too the ending.... but I'm not sure 🤔 u know first time practice

6/28 Week 10 and she is looking fantastic Flush continues, nothing special just one gallon of h20 twice a day. Looking at at least 3 days as tricones still at less than 100% white (@80%) Deficiencies not bad yet, still building some bud 6/29 Looking well, just a bit of CA/MG def showing. Still building Some lights out pics to show off the buds and trics **** We have determined that best practice on coco DTW is to add a low dose of Cal-Mag once a week when in final container. This will satisfy the cation sites as the coco breaks down and avoid mystery CA deficiencies allowing the CocoTek to do its work. 6/30 Just some Bud Pics 7/2 HARVEST DAY TOMORROW!

Hab sie gestern getoppt, mal sehen was so rauskommt 👌🌱💚

June 14: going good but weather is cool and rainy. Layed a loose Scrog net to keep the fan leaves from shading the growth tips. June 15: weekly foliar spray of Extreme Blend this morning. Looking good with one week to go to the solstice. Big veg growth coming over the next couple weeks with the extended sunlight hours. June 18: rain day. June 20: happy summer solstice. Tropicana Cookies was started a bit late but she’s doing fine. With the long sunlight hours at this time of year she’ll now head into the rapid vegetative growth phase that is so much fun. Expect over an inch per day soon as long as the weather stays warm enough. High of only 16 C tomorrow is a bit cool.

Manage to get the monster transplanted into the new tent couple of branches broke unfortunately It is taking up almost the entire five-by-five I don't know if it will be over 3 pounds but I sure am hoping My last girl I managed to get 1.3 pounds out of the 4 by 3 tent This one is double the size with a bit more light so hopefully we can get there Nugs already barely fit in my hand halfway done flower 😇😁🤩 day Ok 94 My top nugs are Anywhere from the size of a can of pop up to a 2L Day 97 of grow I've decided from now on I'm going to be Putting the day and as how long it's been flowering Day 35 of flower added dense by green planet with ph water at 600ppm and 6.4ph first time let see if it will dense 😃

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. Remember, For every molecule of glucose produced during photosynthesis, a plant needs to split six molecules of water. This process provides the hydrogen needed for synthesizing glucose and other organic compounds, while oxygen is released as a byproduct. Homework. If Rubisco activity is impaired and it cannot properly function or regenerate its substrate, the plant's leaves are likely to turn a pale green or lime green, a condition known as chlorosis. Essentially, Rubisco activity is highly regulated and susceptible to various environmental and metabolic factors that can cause it to become inhibited, leading to an apparent failure in RuBP regeneration due to a lack of consumption. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration. RuBisCO is a very large enzyme that constitutes a significant proportion (up to 50%) of leaf soluble protein and requires large investments in nitrogen. Insufficient nitrogen supply limits the plant's ability to produce adequate amounts of RuBisCO, thereby limiting the overall capacity for photosynthesis and carbon fixation. Maintaining the optimal, slightly alkaline pH is crucial for the proper function and regeneration of Rubisco. Deviations in either direction (too high or too low) disrupt the enzyme's structure, activation state, and interaction with its substrates, leading to decreased activity and impaired RuBP regeneration. (Lime/yellowing) Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. For those high-intensity workouts when 1 meal a day is just not enough! Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The plant was getting a little limey yellow in the centre. Shortly thereafter, she was back in business, green mostly regenerated. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Confidence is evidence... nothing more. You are confident because you have driven 10,000 times, you are confident because you have spoken 10,000 times. People think confidence is a feeling, but it's not. If you want more confidence, then you need to create evidence, take more shots, collect more data, build more experiences, take more risks; fail, confidence doesn't come first; it is the reward you get for doing the work. no one else wants to do.