Hallo zusammen 🤙. Habe sie heute geerntet. Wir sehen uns in 3 Wochen mit dem Ergebnis wieder. Bis dann 🤙

@ 1.4 kPa Stretch is over I am removing leaves on bottom of plants and also removing any buds that aren't receiving light. I am always removing a few everyday instead of removing all at once to prevent stress. Also adding grow fertilizer for a while as I have feeling the leaves lost a bit color.

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

Welcome back guys, This time bigger and different! For this time I'm going back to the basics and i will be using 240 Amnesia Haze clones! I start with the old 3 liter pots and they will be repotted into 7 liters, there was no space to have them in 11 liters in the upcomming weeks. The grow Medium is special lightmix soil from the growshop( it has like ph 5.8-6 with ec 1-1,2 in it). Beneeth the soil i putted Expanded Clay so the water will go out more easily. I have got 12 x 600 watt HID lamps in there, but for now I am just using a few. I'm very busy at the moment so my growroom isn't finished yet. This is only half of it. I had to start because those clones, which i have orderd, where deliverd lol. So there was no time left. The lamps are high at the moment because the clones need time to root. If you have your lamps to low when just planted your clones, your clones will dry out and die. They need to settle first for a few days. Day 7: All went well. I do have a ''bad'' corner. Thoose plants are strugling to develope. Nothing mayor, it is normal with this many plants that some clones doesn't root and grow properly. Next week i will decide which one I keep and which I throw away because I don't like to make two schedules, feeding buckets and more, just for a few weaker plants lol. The lamps are at 60-70cm from the canatopy. Some preff it higher and only at that range when flowering. But I want to have it like this because I want strong stems, more bushy plants instead of weak stems and long ugly anoying plants that produce fluffy buds. These sativas love to stretch and grow big, I personally don't like that, so I try to force strong stem and bush growth. Also increasing a bit in Aptus Regulator might force it as well. I did sprayed them with Canna Cure as well, to prefend against all kinds of stuff and give them a little feeding via the leafs. Currently still to busy in real life. Hopefully I finish my full grow room in the upcomming days, spread the plants and maybe even repot them into bigger ones. The rooting and growing proces goes well. They must go a bit larger untill I force them into flowering. See you guys next week.

2020-07-12 New week, same nutrients. I've been carefully monitoring nutrient intake and topping up plant 1 quite often, almost a gallon a day now. The 2nd plant is growing slower and eating a bit less but it's also a week behind developmentally. Plant 1 is happy with EC=1600 and I dilute that down to EC=1400 for plant 02. Plants are looking good! 2020-07-18 Last day of the week. Plant 01 is completely insane. It is so tall that I keep having to supercrop the top as more colas try to hit the light. I obviously let it veg for way too long but I struggled early on with nutrition so I didn't know what would happen when I finally dialed everything in!!! I am gonna take them to the end, I just hope I don't have to cut any colas off that become unmanageable. I have to be way more aggressive with my LST next time. Very very light nutrient burn on plant 2. Still running EC=1600 and EC=1400 for plant 1/2.

👉Alrighty Then👈 42 days in flipped at 28 days It's been a great week all plants are killing it ......... 👉The Strech Is On👈 There all gonna get a slight defolation over the next few days to let air and light get in there 👈 👉So I topped all but Babba Kush and Slurricane they didn't require it ... 👌 Got some nice level tops 👌 I've now started there nutrients program ,for the flip so we are set to go ...... Persian Pie from Greenhouseseeds Full Gas from Greenhouseseeds Babba Kush from Greenhouseseeds Rainbow Melon from Fastbuds Papaya Sherbet from Fastbuds Weddingcheesecake FF From Fastbuds Purple Oreoz F1 From Seedsman Slurricane From Premium Cultivars Soil by Promix Nutrients by Cronks Well this should be fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈

Just getting going again after some mods to my grow box. I’ve replaced the main CFL bulb with an LED and it is much brighter. I also removed the second carbon filter to create more space in the box. The new setup allows for more even space and light distribution and overall more growing space. With the additional light I thought I would try out CO2 so I added an Exhale365 bag. Starting out with 3 plants, 2 Pineapple Express and 1 Pineapple Skunk. There was some type of burn on the first seedling but that was earlier on and it has grown a lot since I first noticed it. I planted the seeds days apart so a few are behind. Growbox summary: * grow space: 19”H x 17”W x 21”D * 4 small, 1 medium internal fans * 3 gallon hydro reservoir * 6 inch exhaust fan + 4 inch exhaust fan in sequence * 150W Mars Hydro TS-1000 (new) * 3 X 20W LED side lights (+1 new) * Exhale CO2 bag (new) Water temps are ranging from 68 up to 70. It’s a small space, but with light covering all sides I think I can get a decent yield. Last time 3.2 ounces were harvested from it. Hoping to hit 5 ounces this time by creating fewer, but larger colas. Day 6 update: * The pinex-1 is looking a little funky. It has weird leaf growth, some minor defects in color, super short compared to the others, and the first leafs are starting to canoe a little. * pinex-2 and pskunk are looking good and growing well, but the leaves aren’t very green. * decided to bump up nutrients a little by moving to week 2 on the schedule and diluting to 60%. That took the ppm up from 400(200 base) to 630(210 base). Hoping if they weren’t getting enough nutrients that this will fix it. * the new light might be a little to bright for these babies. Dimmed it to about 75% power.

Gorilla Cookies Auto 12/12 from start. Smells like Work Shoes after a 8h shift lol. I don't like the smell at all, got fast dryed and has a lot of seeds it's already smoked only a few grams of low mid.

Week 4 - Venom OG and an unknown seed strain. No nutes - tap water - 24hr light schedule Venom OG is in the normal pot.

Now im start to drying. will update more info soon.

Last day chopped approx 1.8 kg tpw

Start of Week 7! Day 44 - 12/12 Looks like I guessed right with the seed swap because this girl has clearly shown she's the LSD-25 this past week. Very excited for my first purple plant since I wasn't able to pull much purple out of my Chocolate Mint OG in my first grow. Glad I have 2 more seeds of this strain so I can give them a better chance at growing up before flower in a future grow. Maf' looks like a Solo Cup Challenge in a 5gal pot 😅 Adjusted the LST and clipped two fan leaves between the top nodes to give the secondary sites a bit more light (Not shown in Day 44 pics) Fed with the same PH Perfect MGB/Molasses mix but upped the MGB to .75ml a gal split between the 3 plants I have going now and given a water chaser to keep the top layer clean from build up. Day 48 - 12/16 Gave another wash out feeding with gallon and a half of Water/Molasses mix split between the LSD and two Cali Snows. Also added D-Earth as a preventative measure on the soil since they're starting to form buds. Trying to avoid any future harmful chems or oils on the flowers if some little buggers decide to move in plus it kind of adds silica when you water it in. Pulled the plants out for a good look and slight LST adjustment. Not much to do on the LSD-25 since she set flower early and the size/structure is locked in. Can only lean and spread to try and get the small amount of bud sites to fatten as much as possible. It is very exciting to watch the purple starting to form in the buds and leaves. She won't be big but I'll try and make her pretty fo sure 😈 Not too much smell to her yet but it could also be due to the fact that the Cali Snows I have are starting to get their stank on and probably overpowering anything the LSD is throwing out. Day 50 - 12/18 Biggest feed so far! Split 1.5ml each of PH Perfect MGB kit and 2 tsp across 2 gallons of feeding solution. LSD-25 got 0.5ml each + 1tsp Molasses and chased with a couple more litres (You imperial American's got me all messed up on this site) Will give a day to dry a bit before giving the top layer of soil a spray down with water to get rid of any residue then top with a D-Earth sprinkle and let sit until it's time for another feed. This is the fun phase of having to take pictures every day or else you don't notice just how big the buds are starting to get day by day! Might be able to get an early chop and dry for some uncured taste testing before New Years depending on how long I let her go to maximize bud size on such a small girl 😛 Thanks for stopping in, throw down a like so I can return the favour, will update through the week! 🙌 IG: @GlazedGrow

Harvest completed for Glueberry OG! Round 2 of this strains grow was majorly different from round 1. Buds are very dense and insanely sticky! Will update in 7-14 days with dry weight and smoke report. Thanks for checking out my grow 👽🌳🔥 09/01 dry weight of 96 grams. Primarily taste of fuel with a hint of berries. Nice balanced high! Output was better with round 2, taste/aroma is also better this round.

Girls are getting bigger every day 💚❤️‍🔥

They popped up, I fed them some Iguana Juice grow, and am making sure they stay wet here at first. YouTube Grow Show Fast Buds Episode https://youtu.be/jj7ZvAQepHM

Ci siamo! Siamo arrivati quasi al traguardo...questi giorni le ragazze sono al loro massimo splendore e l'odore nella stanza e fortissimo! Anche questo aggiornamento è stato fatto grazie all'aiuto di mia madre che gentilmente mi ha tenuto e curato le bambine, sono contento perché sembra che è riuscita a seguire tutte le mie istruzioni e questa volta non ci sono stati problemi...è la prima volta che mi capita di competere in un contest e farmi mandare foto per mail..chiedo scusa se la messa a fuoco non è sempre delle migliori e personalmente non posso chiedere di meglio, è un lavoro che mi serviva e sono dovuto partire lasciando tutto indietro...tornando ai nostri fiori, il green sensation di Plagron devo dire che ha fatto la differenza, contando che il cibo questa volta è stato preparato interamente da me, ha fatto un ottimo lavoro e i fiori sembrano dirlo forte! Cercherò di aggiornare l'ultimo step prima della fine...tra due giorni farò tagliare le ragazze! A presto!!!

Really happy with the overall result, she tastes amazing and puts me on my arse 👌🏻92g dry 👌🏻

It training this week going to let he go do her thang. Light was a little to close so I raise it some

Hi Growers. These little plants have been cruising along just fine. The whole week they have just been sprayed with ph RO water with a touch of cal pow. Yesterday I noticed they were a bit lighter in color and using peat based medium with zero nutrients I decided to feed according to the FastBuds suggested 1/8 strength. It still ended up being around 225 ppm. I also raised the light 3” as I noticed the serrated leaf edge starting to point straight up. That SF4000 is a beast against tiny plants even at 30%. I’ve got the environment at approx 77 & 60% with a oscillating fan and humidifier running. I finally was able to remove that shell helmet off the middle plant. Once I did she immediately took off. I just sprayed and saturated the membrane and ultra gently manipulated it til one cotyledon popped out and left it alone. The hull fell off the other side by itself. All in all they’re looking happy and are doing what they should be. 🤞👍🏻🌱 Happy Growing 🌱