Likes
Comments
Share
( IVE SWAPPED OUT RHIZ FOR REGENAROOT ) will flower when i have room :) Feed Started With Tap Water Left Overnight For Chlorine/Chlorides To Evaporate. Next Day. Starting EC of our water is 0.15. I added 1ML of Regenaroot Per Litre. Then Used Canna Terra Vega Until EC measured 0.7. I then used the mighty growth enhancer drop by drop until my EC measured 1.1 Finally i PH'd the mix to 6.2. Made sure the feed was of adequate temp and continued to feed.
Likes
50
Share
@D33jW
Follow
🌱 Runtz - Week 2 Update 🌱 The second week of growth is well underway, and so far, the Runtz seedlings are showing great potential, despite a small hiccup earlier in the week. 🌿 This week started with a bit of a scare when I noticed something unusual with my Root Juice fertilizer—it had gone bad, with white spots floating inside, resembling mold. I had already applied it a few times during the first week, which led to some concerns about the soil's health. I took quick action by removing the top layer of the soil and replacing it with fresh soil mixed with mycorrhiza. To combat any lingering issues, I watered the plants with a solution of Clean Soil and Cannazym to cleanse the medium and support root health. Thankfully, the Runtz plants didn’t seem to be affected negatively—they’ve maintained steady growth and appear happy and healthy! It’s a relief to see their resilience. Looking forward to wrapping up Week 2 with bigger, stronger plants and setting the stage for explosive growth in the coming weeks! Grow Conditions (Week 2): 🌞 Light schedule: 18/6 🌱 PPFD: 450 µmol/m²/s 💧 VPD: ~1.0 kPa 🌟 Thanks for following along. Let’s keep the momentum going! 💪
Likes
5
Share
@Chubbs
Follow
What up Fam. These girls are growing amazing. Now that I can controll the temps a little better they've taken off with growth. Starting the flower period which we all no know what that means. The countdown is on. Over all Happy Growing.
Likes
2
Share
@D33jW
Follow
📅 Week 5 – Day 35 / FLO 7 BOX: 50x50 - lampa 100W 🌞 Temp: 26°C 💦 RH: 62 - 64% 💥 PPFD: 700 µmol 🌬️ VPD: 1.3 Both showed their sex on the same day, so it’s looking good – they’re developing evenly. I’m watering daily with 600–800 ml (5L pots), EC between 0.8 and 1.1.
Likes
23
Share
@HanzGrowz
Follow
Just waiting it out now. No added nutrients, just water. Bubba and Black Dog have exceeded their expected flowering time, and both are at 95% cloudy with 5% or so still clear. Chemdawg and The New can take up to 70 days or more so we’ll see if they’re late too. Bubba is a foxtailing machine. It was one weekend in early Flower when heat/humidity got out of hand while I was away for 3 days. She hermied a bit and I’ve had my eye out for bananas ever since (find a few every so often). Taking a risk to keep her in the tent with the others but if I catch them early enough the others should be ok. Interestingly I found a YouTube video of a guy that ran bubba and had the same foxtail development (also the same scent description and look overall). Nothing like the gorgeous fat purple budded girl I had last year but the citrus smell on this lime green bud pheno/version is impressive. Curious to see how the smoke compares. Scent combo from all four plants is amazing!
Likes
6
Share
@Weedzoks
Follow
Jour 71: Engrais foliaire, 3ml de vita race par litre. Jour 72: Arrosage 3l avec engrais, 2ml d’alga grow pour la #2 contre 1ml pour la #1. Day 74: Watering 3l complete fertilizers and spray black soap
Likes
9
Share
Harvest day 69 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany
Likes
42
Share
@Dr_Boom
Follow
She's a real beast. I started the flush this week by removing all nutrients from her watering. I just overwater her a little, and remove the access. Going forward, I will continue just giving her a good diet of plain water to remove some of the salts from the soil. She's a little too big to take outside to really flush her. I'm sure this will work out fine. I had to continue tying up some of her branches to keep them from falling over. She's looking good.
Likes
24
Share
Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....
Likes
70
Share
@ICEGrow
Follow
In einer Woche wird angefangen mit spühlen. Ansonsten läuft es perfekt. Ich kann es kaum erwarten!!!
Likes
19
Share
@Robin87
Follow
Week 19 of veg!😂😂 would never of thought I’d of took it this long. The big switch to flower starts Monday! The plants been topped around 40 times over the 18 weeks, 18 cuttings that were taken 3 weeks ago. My first attempt at the lollipop technique , nice little defoliation and a good top dress of Dr organics living soil amendments. I have absolutely no idea what’s around the corner when this is flipped😅 but the scrog nets deffo making an appearance😂 keep an eye out for the diary of her little sisters, there already looking 💥… untill next time 👊🏻
Likes
2
Share
These last 2 weeks the buds have started to fatten. Some have started a foxtail trait. Not sure if it's genetics or my light. The heads on the trichomes are starting to swell. It smells more like candy than weed. I put up a couple poles to keep the tent from sucking into the plants due to the negative pressure from the fan.
Likes
35
Share
The buds are growing and the pistils started to turn brown. Watering as usual, see report in the pictures for more info. Now that I add more Bio-Bloom, the leaves seem quite well so I will continue and see what happens. I continued to remove some leaves here and there and will probably do that until the end. Plants have now reach their final heights, it's buds time :) This week, I made the daily pictures under the "VEG" light instead of the "BLOOM" light (see weeks 3 and 9 for more info about that). I think it's better and that's where the colour difference compared to the previous week comes from.
Likes
20
Share
KRITIC AUTO by KANNABIA Week #7 Overall Week #4 Flower This week she's looking and smelling good👍 she has a some nice dense buds on her that have good trichome coverage. Great genetics for a auto flower! Stay Growing!! Kannabia.com KRITIC AUTO
Likes
43
Share
🌱: one of 2 seeds made it, probably treated too roughly and too wet, the second one did it, 2 days in the glas of water, 3 days in soil. 💧 : Start with SIP 4l 💡 : Start with ppfd 280 μmol/m²/s 🤔:
Processing
Likes
11
Share
@GBudz
Follow
Getting close to harvest now. Beggining to flush this week. Cant wait the buds are rock hard smelling fruity fuel. 😍👌👌☺️ #dutch passion #auto flower #led #glueberry og