Good week. On day 50 I Defoliated. Removed lowers, Taped up the room for light blockage Day 56 from Complete reservoir change Room temp/humidity- 67/70 Plant temp/humidity-70/65 CO2 level-922 CO-47 Water ph- 5.9 Water ppm- 1200 Water temp- 73

Kurz vor Ernte Woche 8. Die letzten tage werden gering gegossen und ein tag vorher gar kein wasser.

Nach der Entlaubung letzte Woche hat Sie sich schon wieder prächtig verdichtet. 2 Kleine Ausreißer die ich wieder mit dem Scrog-Netz eingefangen hab.

Week 9, what to say, I'm definitely doing this much better then last grow! Not seeing any major deficiencies, lower leaves are naturally going yellow and dropping off but the rest of the canopy is surprisingly green still! -Zambeza Super Silver Haze: Ahead of the bunch in size and ripeness iand s probably as chonk as it'll get, added some overdrive to finish it off. Not going to flush but probably will cut if in a week or 2 when I start seeing some Amber. -Royal Gorilla auto#1(the left one) Still buffing up and slowly getting more cone shaped and the stretching seems done now, filling out slowly, I think at least 3/4 weeks but not sure if my patience will agree. -Royal Gorilla auto#2 (the right one) The slow one of the bunch, seems to lag behind about a week so a month at least before it'll be done :/ Overall just doing 2 waters a week, wed & sun but they are getting more thirsty in noticing I just add nutes fairly freely, lowering the cal mag a bit, more top max and big bud. 450ppm Messed up the pH down today and I think it went in 5.9 but probably won't matter.

FLOWERING STARTS In the the new marshydro set-up 120x120x200 4'x'4 FC-4800 lamp Pubes are showing on all of them happy days in the absolutely amazing marshydro tent 👌🏻💯👌🏻 and no balls in the room yet so that's good at least i know that first grow i had issues with hight but with my 120x120x200 that not going to be end problem so stretch like ya never stretch before 💪🏻 i am prepared now lol the FC-4800 is a beast and still tweaking hight dimmer don't want to burn them but also want to utilize the lamp as much as I can but will get under control 🤘🏻😎🤘🏻 1/11/21 Did some last defoliation and spread the plants out bit Tru the tent got lamp dialed in dimmer around 55% and hight around 45cm above the plants and every week will bump up the dimmer with 5% they are looking very good healthy and i am very proud of the results so far gave the proper nutrients and the normal watering in between everything cool in the hood Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

This week has gone fine except for one thing which I’ll come to later on. Still stretching, canopy par level is 900 on average and I don’t have any way of getting the lights up further. Hoping the intense light will slow the stretch down a bit but we will have to wait and see. Worst case I’ll have to dim the lights down a bit. That leads me onto the mystery of this week. The nearly dead plant. I have no idea why it has gone so limp. You can kind of see on the photo lapse how quickly it collapses. Incase it’s some kind of disease I’ll give it another day in there. If it doesn’t recover I’ll have to pull her out and try to train the other plants over her empty spot so I don’t waste any light. EC is around 1.2-1.5 atm, the highest dose I’ll be giving them will be week 4 and 5 of flower when the buds seem to do the most weight gains (visually). Canopy is actually quite even if you overlook the hole in the canopy, maybe a couple inches between highest and lowest. Anyway, thanks for checking in guys, if anyone has any thoughts/comments about the dead plant let me know as I’m struggling to find answers online. 😊

HAZIRLIK Dolabı yapmak bir aydan fazla ileri sürdü; aydınlatma, havalandırması, iç kaplaması, montajı, elektrik kabloları, fişleri, soketleri, prizleri vb. Tüm bunların ardından, sonunda bitirmem ve kotiledonların görünenlerin görünmediğini gördüm. Burada yaşadığım mücadeleyi okuduğunuzda, heyecanımı ve mutluluğumu paylaştığınızı düşünüyorum… =) //LED'LER// Torch LED'leri kullanıyorum ve bu LED'ler fiziksel olarak oldukça büyük olduğu için, dolapta ciddi miktarda dikey alan kaplıyorlar. Toplam 70 cm'lik aralıklardan 50 cm'ye düşüyorlardı ve toprak birleştirmeyle yaklaşık 40 cm'ye düştü, bu da başlangıç ​​büyümesi için neredeyse hiç yer bırakmadı. Bunu çözmek için Torch LED'lerini plastik yuvalarından çıkardım ve bunları ayrı ayrı boyutlandırılmış ahşap plakaya düz bir şekilde monte ettim. Bunu yaparak yaklaşık 15 cm'lik alandan tasarruf sağladınız. Ancak dolap yapısı ve Torch LED'lerinin kendisi nedeniyle ciddi ısınma sorunlarının belirtileri. //KABİN// LED'leri açtığımda, 26,5°C'lik iç havayı alıp 37–38°C'de dışarıya atıyorlardı. Her lamba bana yaklaşık +4°C'lik bir ısı artışı sağlıyordu. Durum böyle dönemde fan kapsamını artırdım; bu sıcaklıkta yardımcı oldu, ancak daha sonra içerideki nem 35–30'a, hatta %25'e düştü. Ne yeteneğimi düşünürken, 12V çift taraflı bir Peltier modül kullanmayı planladım: soğuklukta bakır borular sararak bunu fan destekli bir sıcaklığa dönüştürdüm. Aslında işe yarayabilirdi, ancak sıcak ortamdan ısıyı uzaklaştırmak için ihtiyacım olan sistem çok hantal hale geldi. O yerde, "Büyüme hayali bitti" dedim ve vazgeçtim. Birkaç gün sonra "Neden olmasın?" diye düşündüm ve dolabı balkona taşımaya karar verdim. Sonuçta, gizliydi - kimse içinde ne olduğunu bilmeyecekti - ve balkon uydu yoluyla mükemmeldi. Dolap balkonunda olacağından, iç kısım ısıdan, yağmurdan, bölgelerden ve diğer zararlılardan tamamen yalıtılması gerekiyordu. Tüm delikleri ve ortamları sıcak silikonla kapatırım. Daha sonra ısıl işlem köpüğü yerleştirdim ve her şeyi bölme filmle kapladım. Tüm bunları yaparken termostat, ısıtıcı, nemlendirme ve vantilatör için hiçbir şey görünmemesi için tüm kablo bağlantılarını da gizledim. LED aydınlatma için tek tek veya hepsi birlikte kontrol edilebilen ayrı lamba yuvaları ekledim. Ayrıca dolap kapağı açıldığında tüm ana LED'lerin otomatik olarak söndüğü ve yalnızca küçük bir 5W LED'in açık kaldığı bir sistemim oluştu. Vantilatörü dolabın sağ üst arka köşesine monte ederek egzozu diğer noktalara yönlendirdim. Vantilatörün gücünde, negatif basınç o kadar güçlüydü ki hava yalnızca girişten katılıyordu - başka hiçbir yerde 0,001 m³ bile hava kaçağı yoktu. (Bunu hava verileri için değil, zararlıları uzak tutmak için yaptım.) //SICAKLIK VE NEM// Dolabı balkona taşındıktan sonra bu sefer ciddi bir soğukluk sorunuyla karşılaştım. Geceleri sıcaklık 8-9°C'ye düşüyor, gündüzleri ise 24-27°C'ye kadar çıkıyor. Elektrikli fanlı ısıtıcılar kullanmak istemedim çünkü havayı çok kurutuyorlar ve tehlikeliler. Peltier fikrinden ilham alarak tekrar düşünürken çözümümü bir PTC ısıtıcı kullanarak buldum. Hava bağlantıları olan iki alüminyum bloktan oluşan bir PTC ısıtma elemanı yerleştirdim ve gelen tüm havayı bu kanallardan mülkler. Sistemi 24,5°C'de açılıp 24,6°C'de kapanacak şekilde ayarladım. Bu şekilde sıcaklık sadece 1,5° tolerans içinde -24,5 ile 26,5°C arasında dalgalandı ve LED sayıları azaldıkça daha stabil hale geldi. PTC'yi termostata bağlayarak ısıtma sistemini tamamladım. Gündüz sıcaklık sorunlarının çözülmesi için, elektrikler 11:45'te kapanıp 17:45'te tekrar açılacak şekilde programladım; böylece 6 saatlik bir kesinti süresini elde ettim. Bu süre boyunca kabin yaklaşık 24°C'lik dış havayı çekiyor, maksimum 27°C'ye ulaşıyor ve ardından tekrar soğumaya başlıyor; tam da bu noktada PTC devreye giriyor. Böylece daha önceki büyük yangının sorunu tamamen çözülmüş olmuştu. Ayrıca nemlendirmeyi termostata bağlayıp %70'e ayarlayarak nem sorunu da çözülürm. Tüm bu süreci 1,5 ayımı aldı ama değdi. 1-2-3. güne kadar tek led 3. günde 10. güne kadar 3 ledide açtım ama bitkide büyüme problemi olduğunu gördüğüm için ışıkları söndürüp tek ışık 40cmden devam ettim.

Just did the switch to 12/12. Decided not to scrog. It’s my first time not scrogging. I have been training them a bit. One of the plants has been abused by me a bit. It didn’t love being topped. Not sure but it grew very bushy and I’ve been working hard on it. Using it as a bit of an experiment.

day 15 - nothing day 16 - nothing day 17 - nothing day 18 - nothing day 19 - topping at 5 knot and defoliation the first 4 leaves day 20 - nothing day 21 - nothing

Coming tomorrow 😇

Buenas a tod@s.... Séptima semana de estás runtz x layer cake de barneys farm.. las veo bien, fuertes y engordando, rico aroma y parece q bastante recina, no quiero anticiparme a nada, faltan unas semanas y van a engordar algo más, es verdad q a mí parecer creo q las pasé a flora antes de tiempo( errores de novato ese y otros mas) pero puede ser mi parecer, pero podría haberlas dejado crecer algo más en su etapa anterior, apuntado para el próximo cultivo....💪🏻 X lo demás todo en orden, temperatura, humedad, pH, luz y nutrientes... Es verdad que las variedades pueden prometer mucho más, si hay carencias es x falta de experiencia la cual se aprende paso a paso🙏🏻 nos vemos en unos días, buenos humos para tod@s 🔥💨💨💨🏻😎⚕️ 🇦🇷🤝🏻🇪🇦

Gorilla Cookies are doing great, they are stacking very nicely. I am liking the nose spacing on these girls so far. Introduced some more of the Bonnie nutrients from Cronk not too much though, this is a potent nutrient mix and I would recommend using 1/4 of what they say to start with and see how the plant responds. RH and temps have been consistent, trying to make them comfortable as to get a week or two more of veg before they flower. Happy Gardening 🇨🇦👊❤️

This bush is a beast. Take a look at her stem. Monster. So many leaves!! 😲 On she goes!

Apollo is in early flower. I water and fertilize Tuesday, Thursday and water on Saturday or Sunday. Even though the plants started within 2 weeks of each other, Apollo is in flower now. The Vpd for veg is much higher than for flower. So on 10/17, I moved the Friends ( Zkittles, Godzilla Cookies and GrandDaddy Purple) to my 3x3. Stress training done on friends: Zkittles -tie down GDP -topped Gorilla cookies no stress training as this plant is the runt of the friends. Pics of Apollo's friends before moving tents. Friends, Royal Queen Seeds Is offering a discount on purchases 👉**GROWERS20** for 20% 👈 Https://www.royalqueenseeds.com Link to Apollo https://www.royalqueenseeds.com/us/56-f1-hybrid-cannabis-seeds Variety: F1 Hybrid auto Genetic Background: Lemon x Black Domina x Sugar Mangolia THC: Very high Yield: XXL Height: 55 - 75 cm Flowering time: 45 - 50 days Harvest: 75 - 80 days after sprouting Effect: Calming, Creative, Motivating , Physically Relaxing Flavor: Citrus, Herbal, Lavender, Pine, Vanilla Major terpenes: Caryophyllene, Farnesene, Myrcene, Terpinolene Climate: Short Summers ==================================== Equipment: AC Infinity CLOUDLAB 844 – Advance Grow Tent 48”x48”x80” CONTROLLER 69 PRO – Grow Tent Controller CLOUDLINE LITE 6 - Inline Fan 6" IONBOARD S44 – LED Grow Light Board 400W CLOUDRAY S6 – Oscillating Circulation Clip Fan Carbon Filter 6” Pots: 5 gallon Air pots Soil Fox Farm Happy Frog amended with worm castings, dolomite lime and mycorrhiza. Seeds provided by Royal Queen Seeds Check them out 😎 Https://www.royalqueenseeds.com Link to the seeds https://www.royalqueenseeds.com/us/56-f1-hybrid-cannabis-seeds use Discount Code 👉 **GROWERS20** for 20% discount 👈 Nutrients: Total Plant Solution >TPS1 >Canopy >Signal Amended soil recipe #2 used for soil prep. https://www.paramountseedfarms.com/super-soil-recipes/

Not much to do with Autos. I take a handful of leaves everytime I'm in the tent. Veg thru 2-3 weeks of flower.

Today is Day 50 !! We have started flower an they are just looking amazing! We have switched up the nutrients for flower, instead of 1 tsp bloom and 3 tsp of veg , we just swap 3 tsp of bloom and 1 tsp of veg !! Can’t wait to see what these laddies do this week!!

Flowering day 3 since time change to 12 / 12 h Hey guys . My cutting heating broke 3-4 weeks ago, which was fixed immediately and everything went wonderfully. Now, 3 days ago, the central heating broke down in the entire room, so that at night I only have temperatures of around 13 degrees :-( . One or the other lady is slowly starting to see a phosphorus blockage, as this can no longer be absorbed at temperatures below 15 degrees, like many other nutrients :-( . A friend looked at the heating yesterday and came to the conclusion that a real company had to do it, which is by no means possible for a stranger to enter my room. I quickly ordered heating mats for all the boxes so that the ladies could at least get warm feet. That's all I have this winter full can do . Let's hope everything will be fine 🙏🏻. As soon as the heating mats are attached in the coming days, I will post them in the pictures. Now for the update. Despite the severe cold, the ladies are still doing well and have made good progres . The ladies only had to be watered once this week, each time with 1 l, because it absorbs the water very slowly because of the cold and I don't want to overwater it. I took every single plant in the pot to take a close look at their roots. These are snow white and look very healthy 🙏🏻. It was also the last time neem oil sprayed so that the last trips are finally gone. Otherwise everything was checked and a lot of planning was done, like I do with the heating mats. Since a friend had the same problem in one winter and the heating mats got 10 degrees plus on the pots, I am very confident that it will at least bring something for the last cold month 😃 🙏🏻. I've started flowering even if some are still a bit small, but otherwise they'll get too wide from training and end up taking up space :-) until then have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

-getting really tight now -will install scrog-web to use the space fully -some leafs still have yellow and brown spots -think i will fetilize twice a week from now on -getting a lil cold in the night but therefore humidity is now almost perfect Thankful for any comment :)

Started off with some training 😍 Shes responding very very well! Was about to top her but I changed my mind so ill see how big she will grow Hoping for a bushy plant 😍

She’s still a one floor house between skyscrapers but probably she will become bigger one day 😛