Likes
Comments
Share
Starting to learn a lot more about ppm. An starting to drop it down for flush I’m also starting to cut out the micro and MagNifiCal out of the feedings as I’m really looking for that autumn fade. Temps already drop about 8-10 degrees form lights on to off so i believe that’s set. Gave her two waterings just plain water cause her ppms were probably as high as I am LOL I slacked on ph which probably wasn’t good but we will see also forgot to water her so she went 4 days without, let’s just say she wasn’t very happy with me ahah
Likes
4
Share
So happy with the amount of tops there are going on in here! Buds are pretty big for only being 3 weeks in! Great even canopy, and a nice under skirt! Got some small tiny WPM spots, I think it’s just a little crowded. But will be treating it asap.
Likes
39
Share
Likes
5
Share
Week from 10/07 to 16/07 Going smoothly, plant already feeling great in the new pot. I used sticks to make a star cross frame at the base so I can pull branches in every direction Now it’s a matter of letting everything grow and adjust the branches until around the 20th of August when it will start flowering
Likes
57
Share
@Roberts
Follow
Pablo Escobar has made good progress in the last week. She has reached the solution for 1. She also acquired enough strength to stand up from stretching too much upon sprouting. She has started to me some growth process, and is looking good. Thank you Divine Seeds, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around 4/17 3:45am. Here’s the exact vibe you’re going for, and yeah, it’s dark, inappropriate, and could be hilariously unhinged if executed right: Video Concept: “Revenge of the Skid Row Sith” • Split-screen the entire time. • Left side: Clean, epic original Revenge of the Sith footage — Anakin vs. Obi-Wan on Mustafar. Dramatic dialogue, lightsabers humming, lava flows, John Williams score swelling (“Battle of the Heroes” or the full Mustafar duel track). • Right side: Real, raw bodycam or dashcam footage of two absolutely fried-out junkies (or one junkie vs. cops/security) going full delusional meltdown on the street — flailing, screaming nonsense, swinging wildly at nothing or at officers, thinking they’re in an epic lightsaber duel. Twitching, eyes rolled back, yelling shit like “YOU UNDERESTIMATE MY POWER!” while barely able to stand. One of them probably shirtless, covered in sores, pants falling down, yelling about the “high ground” while tripping over a curb. The comedy comes from the perfect sync: • When Anakin says “I hate you!” → Junkie on the right screams “I HATE YOU COPS!!” or just incoherent rage. • When Obi-Wan says “It’s over Anakin, I have the high ground” → The junkie is literally on the curb or a slight incline, yelling at the cop below him “YOU HAVE THE HIGH GROUND?!” • Dramatic slow-mo lightsaber clash → Slow-mo of the junkie wildly swinging a broken bottle or just air, missing by a mile while the cop easily sidesteps. • Anakin getting chopped up and burned → Junkie getting tased or tackled into the dirt, still convulsing and screaming about betrayal. Overlay the full Star Wars audio (dialogue + epic music) on top of the real footage on the right, so the junkies’ actual grunts and screams are mostly drowned out or faintly audible underneath, making it look like they’re perfectly delivering the lines in their drug-fueled psychosis. End it with the classic “You were the chosen one!” speech while the junkie is face-down in his own puke, getting cuffed, still muttering about the dark side. Tone-wise: Super dark humor. It walks the line of “this is fucked up” but the absurdity of the overlay makes it land as comedy instead of just tragedy porn. Think It’s Always Sunny energy meets Cops bloopers with Star Wars fan editing. I can’t actually generate or edit real video clips here (especially not real bodycam footage of people in crisis — that’s a legal/ethical minefield even for parody). But if you want, I could: • Write a full detailed script/timeline with exact timestamps from the Mustafar scene synced to generic “junkie fight” beats. • Suggest public-domain or fair-use-friendly ways to source similar footage without doxxing real people. • Help you describe it precisely enough to feed into a video AI tool like Runway, Kling, Luma, or whatever’s good for video right now (with heavy disclaimers on the dark content). Want me to flesh out the full beat-by-beat script for the Mustafar duel re-cut this way? Or pivot it to fully AI-generated characters (two cartoonish, exaggerated skid-row types in a filthy alley “Mustafar” with lava made of spilled fentanyl and burning trash) to avoid any real-people issues? It’s a nasty, wrong, stupid idea… and that’s exactly why it could be comedy gold in the right hands. Your call how far you want to take it."" 4/18 3:21AM 👨‍🔬🚨"Yeah, pH drift upward overnight (or over several hours) in a freshly mixed hydroponic nutrient batch is super common—especially when you let it sit with constant agitation like a magnetic stirrer. It's not usually a sign that something's broken, but it can make adjustment feel like a battle the next day. Why this happens with your setup CO₂ off-gassing + aeration/agitation: Fresh water (especially tap or even some RO) often holds dissolved CO₂, which forms carbonic acid and keeps pH lower initially. When you mix nutrients and run a magnetic stirrer all night, you're constantly agitating and exposing the solution to air. That drives CO₂ out, reducing the acid, so pH naturally rises (sometimes 0.5–1.5+ points). Magnetic stirrers create good mixing but also promote gas exchange, speeding this up compared to a still jug. Buffering from water and nutrients: Many water sources have alkalinity (bicarbonates, etc.) that acts like a buffer. Nutrients themselves have their own buffering capacity. When you add pH Down right after mixing, the buffers can "fight back" over time, slowly pushing pH higher as the solution stabilizes. General Hydroponics recommends mixing nutrients first, waiting 15–20 minutes (or longer), then adjusting—because immediate readings can be misleading. Temperature and time: pH readings shift with temp, and overnight changes let everything equilibrate. If your stirrer keeps things moving and slightly warmer, that can influence the drift too. Your General Hydroponics pH Down (usually phosphoric acid-based) should still work, but if the solution has strong buffering or you've already hit a stabilized higher pH, it can feel "hard to lower" because you're fighting those buffers. Adding it slowly while stirring, waiting 10–30 minutes between additions, and re-testing helps. Don't chase it too aggressively right after mixing—let the batch settle. Does this happen in the "reservoir" (rez) too? Absolutely—often even more noticeably. In an active rez (with airstones, pumps, or circulation), constant aeration drives the same CO₂ off-gassing, causing pH to creep upward over hours/days. Plant roots taking up nutrients (especially nitrates) can push it higher too. Many growers see this exact pattern: mix and adjust at night, wake up to higher pH. It's why a lot of people premix the night before, let it stabilize with gentle mixing/aeration, then do a final pH check and tweak in the morning before using. Quick tips to make it less frustrating Mixing routine tweak: Use your magnetic stirrer to fully dissolve nutrients, but maybe run it for a few hours instead of all night if the drift is too much. Or mix, stir briefly, let sit still for 30–60+ minutes, test/adjust, then optional light stirring. Water source: If you're on tap/well water with high alkalinity, that amplifies upward drift. RO water often needs more pH adjustment initially but can be more stable once set (though pure RO can sometimes drift differently). Adjustment technique: Add pH Down in small increments while stirring, wait for the meter to stabilize (it can take time), and re-test after 15–30 min. Track how much you use per gallon so you can anticipate next time. Test meter: Make sure it's calibrated and the probe is clean—old or dirty meters give wonky readings that make drift seem worse. If it's stubborn: Some folks add a tiny bit of pH stabilizer or just accept minor daily tweaks. Citric acid-based downs can drift more than phosphoric ones, but GH's is usually pretty reliable. This is one of those classic hydro "annoyances" that almost everyone runs into—your nighttime low-frequency tuning sessions with the subwoofer probably give you plenty of time to notice these little chemistry experiments too.""
Processing
Likes
30
Share
Week 2 , I'm seeing amazing new growth everyday. Love my @marshydro TS-600 . I’m learning new stuff everyday about growing indoors and I love all the feedback and positive comments from my fellow grow diary peeps. I am looking forward to the next 8 weeks of my first indoor grow. ✌️#growwhereyouareplnted #growerschoiceseeds #marshydro
Likes
7
Share
Day 63 in flower…gonna harvest this 6k hps room this weekend got water last time today gonna be bone dry by this weekend…cut all fan leaves off and hang for 7+ days in same room
Likes
21
Share
Welcome to growfessor theatre, 4x4 edition, under the Mars-Hydro TSW2000. Starring for the next 9 weeks (after about 13-14 weeks in veg) is Do-si-dos, Green Crack, LSD and Mandarin dreams. I'm adding sensizym to the nutrient line up this grow, still not sure how much of an impact it makes, but hopefully I'll have an answer after this grow. Thanks for stopping by growfessors 👽🌳💚, tune in next week!
Likes
19
Share
@Mazgoth
Follow
It’s better than it was before.This week I’m giving only water and the next one I will flush with flawless finish
Likes
77
Share
So this week the little gelatocake is on week 8 and is really starting to eat herself now, full of trichomes and smells like tutti fruity chewie sweets. Last week of nutes for her then mollases only. Week 7 for the othere gelatocake and shes starting to fatten up now as well as fade also. Babys have got big since re potting I will.bend them over later. Sherbert mimosa are still taking there time I think they are starting to get bigger 🤔🤣 I Will keep you updated lol. Happy growing guys 👌💪💚
Likes
5
Share
Started some LST early in the week for the slightly older plant, then later in the week with the other two. I was going to let them go Christmas tree style, but I can tell already they will out stretch the others. Ended up just bending the top and tying with pant ties. This should promote some busier plants. Still figuring out the Correct Cronk Dosage, it’s pretty strong stuff, just trying to find the balance. Happy Gardening 🇨🇦👊❤️
Likes
23
Share
Básicamente lo mismo, aunque está semana pilló bastante más horas de luz(tuve que irme fuera de casa dos findes seguidos, en los cuales la dejé con la luz encendida full 24/7 en la caja) Como experiencia utilicé café reposado 48h para "alimentarla" e intentar bajar el Ph de la tierra (coco ph6+hummus ph7+vermiculita ph8= ph total 7) El otro experimento fue cubrir la tierra con coco para que el tallo eche raíces y aprovechar su espigamento! Las horas de luz solía dejarla 8h en bombilla mientras duermo, y el día la pongo en la ventana a que tome el fresco, pero apenas tiene luz directa, me da la sensación que crece más rapido cuando vuelvo del finde, estoy replanteandome tenerla más tiempo en la caja con luz, porque la veo aún pequeña, y quizá ponerle un ventilador de pc o algo🤔..veremos, aún tengo el papel de aluminio al lado de la caja y ni se lo he puesto, con eso os lo digo todo☝️🎃
Processing
Likes
8
Share
Both Barbarian (=AK-47 x Barbara Bud) plants are filling up more and the first pistils start to get brown, which shows the plants start to ripen and go towards harvest time. The smell they exude is STRONG now and VERY PLEASANT. The aroma is sweet, peachy with sandalwood undertones and is MOUTH-WATERING. The plants are TRICHOME MONSTERS and are covered in crystals, any little touch and your fingers stay sticky for hours.
Likes
40
Share
@GYOweed
Follow
All from fridge 24 hr shot glass ro and h2o2. All popped. Substrate is coco amended with dr. Earth and other goodies. Was wet and set in tent 48hrs. Letting these grow into the wet coco until the top is dry. Lights are 300 par about which is max for babies i think...
Likes
46
Share
@Rollex420
Follow
- 17-05-21 (Day 1) // // - 18-05-21 (Day 2) three of the girls got out of the soil correctly!😊 while the Runtz sprout is the only one that still remains in its seed despite she already opened it for 2/3 day now..🤔 its root seems to struggle to grow or pierce the soil .. I'm helping her by keeping the humidity higher since I put this bag, we'll see what happens 🤷‍♂️🏻 ..Any advice will be welcome 🙏🏻 as always have a nice day and happy growing to everyone! 😊☮️💚 19-05-21 (Day 3) ..Unfortunately the Runtz Muffin is dead, was unable to come to life like her little sisters. After three days, i tried to help her removing her seed husk.. but there was nothing to do 😢 So here is a new start!! 😊 I put this Lemon Tree “Freebie” seed to germinate aaand to replace the poor Runtz Muffin. 😕🙌🏻 We'll see how it goes this time.. 🤞🏻🍀 Sending positive vibes for you and your garden ☮️💚 20-05-21 (Day 4) All the girls are doing great and continuing their grow. The Lemon Tree is doing great too with its germination, that in just six hours the seed has opened! Now I’ll wait that the sprout grow a tiny root of (1,5/2cm) at least, to pass it into the soil. Happy grow fam. Stay smoky 😙💨 21-05-21 (Day 5) With today the girls are in their fifth day of growth. 🙌🏻 Bio-heaven (amino-acids) added to the recipe (1ml/1L) As you know after the death of Runtz Muffin, I have been germinating the Lemon Tree for two days now, today is the third day for her after an excellent germination, I have transferred it from the paper towel to the soil to make it grow. Let’s see how she will grow, Despite being a week behind, I hope she grows strong, healthy and fast🤞🏻 Have a good weekend, lift up and relax. Peace ☮️ 💚 22-05-21 (Day 6) The Lemon tree is officially out of the soil, ready to grow! 🙌🏻💚 The other girls are fine, they are on their sixth day of life and they love the environment where they are growing up. ..Plus they are always listening to music (Lo-Fi) 24/7 ☺️ I hope they like it.. 🤷‍♂️🏻😆 That's all for today. Have a good weekend gromies!! 🧑🏻‍🌾👩‍🌾🏻☮️💚 23-05-21 (Day 7) Today last day of the first week for the girls and first day of life for the Lemon Tree! The nourishment for them is always the same, except for the Lemon Tree which for the moment I am just spraying water to irrigate it. ..In this round I expect great things! Happy growing to everyone! ☮️💚
Likes
2
Share
@TTerpz
Follow
Start of week 14 (Day 49) 9/20/25 Fed with water 9/20/25
Likes
119
Share
@Wicket
Follow
And im in first flowering Week since last sunday, so far i really can't complain. Everything looks healthy and fine. Plant 3 is still kinda weaker/slower and Plant 4 seems to want to do some sativa things and grows up like hell but oh well, at least Plant 1 and 2 just grow as they should. This week i made the Bio Tabs compost tea for the first time and the plants seem to love it. Each one received 500ml if it. Can't wait to see the results at the end of the run. Again thanks to Bio Tabs for sending it out so i can test it. Humidity was pretty high because of constant rain this week, but it seems like i have made it through it, now just to make sure to finish this run before the summer heat will come. I removed a few leaves here and there because they were stacking or blocking light, i will defoliate in 1-2 weeks for real. Sadly Plant 4 needed an even higher stool then last weeks, so it's on the same height as the others. It was getting not enough light this deep down. That is also because why the scrog net does look like it does right now. I try to make it more "appealing" tonight, but i don't want to break anything and it works like it should right now, so yeah it looks stupid but it's alright. See you next week and thanks for all the likes and comments. 😍🙌