Likes
Comments
Share
Get my scope tomorrow to find out finally what is going on with the trichomes!
Likes
21
Share
@Stick
Follow
This week was half veg half bloom. I may have to find a new home soon so I've decided to flip all my plants into flowering by the middle of week 08. This lovely AK-420 is the smallest plant in the room, but probably the cutest. Her tight nodes are ready to explode with flowers and her stalks, hidden beyond large leaves, are strong enough to support heavy buds. She had a slight Calcium deficiency that was treated immediately and the recovery was quick. I'm confident she will become a nice bush. She no longer has the canopy ring, in order to "let her breath" and grow vertically. Wait & see! 😎
Likes
2
Share
@semechkin
Follow
grow fast, big and bushy. very healthy big green leafs. nice one. showing preflowers after 4-5 week.
Likes
38
Share
These babies are behaving exactly how I want them to. So far no signs of preflowers at all, this is good because my light is farther away than I’d like and AVT is still finishing up in the tent and she creates shade. So they haven’t been growing as fast but they are looking healthy and happy, I’m sure they’ll take off in growth once they get the entire light and space. I topped Pink Kush on day 23 above the 5th node and I pruned the first node as these never really make great stems for big buds. In the next day or two I’ll top the other three ladies and prune first node as well.
Likes
9
Share
@Medgrow93
Follow
Flipped to 12/12 a couple of weeks ago but the flowers are just now starting to form. One of the plants turned hermie out of nowhere, I really don't know what happened. Also the lower leaves are turning yellow and I think it has something to do with the pH because I think I added too much calmag but other than that they're doing their thing.
Likes
36
Share
@valiotoro
Follow
Super frosty & rock hard buds💥 Delicious terps🤤 Perfect buds leaf ratio
Likes
20
Share
D123 04.05.2025 It‘s „Harvest Day“ stunning contest never expected such a huge plant with so many buds plagron and the zamnesia breed really did there job. Let’s hope the best for the contest more detailed bud images after the dry trim in about 2 weeks D136 Today was dry trim day looks and smells amazing harvested a stunning 69g out of one plant with 100W only in a 2x2 two tent with 2 other plants aside, great job @zamnesia and @plagron
Likes
3
Share
@Promi
Follow
I took the smallest 3 on flush, water only. Harvest 3 earlier as day smoke.
Likes
25
Share
Day 59 Finally Fruit Spirit is going into 48 of darkness after 6 days of flushing.... She smells and looks just tasty cant wait to chop those girls in 2 days!!!!! 😬😁🙌
Likes
7
Share
They're seeming happy. I have culled the males and collected their pollen. Now we are down to 3 females.
Likes
6
Share
Day-1 put 41 blue dream seeds which i beleive are non gendered autos into pellets to grow as backups, I am primarily trying to grow a white widow autoflower from crop seed kings and 3 of a peyote strain unspecified gender and flowering style. Day-2 humidity and temperature are sitting at 98up to +100 and 23-31 degress celsius will be leaving top more open after about 6 today to lower humidity just wanted it cranked up for a day or so Day-3 things are looking good many seeds are starting to show taproots between a quarter inch and five eights of an inch popping through the bottom of the seeds. Day-4
Likes
90
Share
@MrCOCO
Follow
Hi everyone🍃🍃🍃Everything is going well...🍃🍃🍃 The girls are growing very fast which makes me happy...🍃🍃🍃 I defoliated in 14 days of flowering and removed the small flowers that wouldn't do anything anyway....🍃🍃🍃 Happy growing🍃🍃🍃
Likes
2
Share
Raised EC to 1.9-2.0 ish pH 5.8 Raised the Lights to the maximum height. Tops-to-Light-distance around 25-30cm Buds are bulking up daily! This run is smooth as hell. No deficiencies, no pests, plants look happy from beginning until now.... Lets hope the last 5 weeks will be ok!
Processing
Likes
4
Share
@fezzollas
Follow
The time is coming. It's very healthy, I ended up exaggerating a little bit with the fert, but don't panic, it's organic, it caused just a little burnt on the edge of the leaves. The weather is stabilizing, it stopped raining here and the humidity is normal now. The pistils are starting to fester and are resining too much. She is very fat, the smell is strong every day and I am totally in love with her.
Likes
22
Share
Tudo indo bem por enquanto. Meu novo espaço de cultivo para clones esta em testes mas se der certo terei colheitas de 2 em 2 meses
Likes
9
Share
COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
8
Share
Die Narben werden jetzt langsam Pink 😝
Likes
27
Share
Hola cultivadores! Esta chica está seduciendo mi mente cada día, no dejo de verla y darle cuidados, algunas hojas viejas cuentan la historia de una vida de excesos y mucha luz de cerca, pero hoy es una planta fuerte y segura. Se alimenta con ansias ya que el agua de riego desaparece de su maceta en cuestión de horas (además que hay mucha exposición del sustrato). Su etapa de Bloom ya es más que visible y he decidido no hacer defoliación hasta dentro de 2 semanas si fuera necesario. Sus ramas son muy fuertes y creo que no necesita nada más de lo que le doy. Si alguien tiene un sabio consejo se lo agradezco 💐🚵‍♂️🏄‍♂️🌹💚 Saludos a todos y gracias por visitar el diario 😌 Irie!
Likes
33
Share
This plant is a test of a new genetic I hope to release from GHSC which I thank for letting me try these delicacies. The highest quality is the resin, oh my how much resin has spread on the flowers and leaves, even the most peripheral ones. Exceptional way of rendering this plant. It's also very very fast, ready in 9 weeks and I really love the way even the leaves turn dark on purple at the end of their life, beautiful. The production also seems excellent we have a great result on the scales, the flowering is in clusters, you are not impressed by the space between one internode and the other from a cluster flowering but the flowers are dense and heavy and with this resin for me it could flourish as it pleases. I really hope that the GHSC masters decide to let it out, I advise you to be careful on the site and on social networks and grab more serious seeds than the situation for the season. https://greenhouseseeds.nl Try powdered feedings! https://shop.greenhousefeeding.com/us/ Mars is a leading company and it shows in the quality and quantity of the crops! https://www.mars-hydro.com/
Likes
7
Share
Processing
Likes
18
Share
@Ktims420
Follow
Very excited , first grow. Struggling with knowing the exact amount of water they need since I am already in the big pots their final resting home