Harvest day 64 Hey guys :-) Finally it was time to harvest :-) . This time I did wet trimming again. For the next plants I will dry upside down. They were cut by habd and placed on nets. The fruit stays constant at 62% until it goes into jars to ferment. Have fun with the update and stay healthy 💚👍 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/de/hanfsamen/lemon-candy Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

The start of cultivation was not at all favorable at temperatures below 10 degrees then came a storm that caused cracks and tears in the leaves ... The leaves were very dirty from clay and perlite, so I tried to wash them all with a paper tissue. The weather was not at all kind, so I added Advanced Nutrients- B52 vitamins and Rhino Skin to strengthen the stem and leaf I often meet different animals on my way through the forest, today I met a newly born young fallow deer

I've decided not to send her into flower yet and I'm trying to stretch her throughout the whole tent.

Mephisto forum stomper, have grown a couple before and I must say this is my best looking one. Seems like I should have some really good smoke coming up

Week 7 is going smoothly so far. The flooding issue has subsided and the clones seem to be really taking off now. I'm excited to get back from vacation and really see my girls and my reservoir conditions after a 2 week hiatus.

Gorilla cookies is a beast of a plant it can easily fill up a 4x4 with one plant if done right. Really thick white tricombs strong smells big colas. What else can you ask for a good plant all around

The plants are doing great this week too, the skunks continue to grow tall while the seedsman have remained the same size. The skunk area is getting a bit chaotic due to the too long branches, it would have been better to put a second net but they should stop here anyway. The seedsman area, on the other hand, is really uniform and looks like they can stand on their own. The 2 tests "silver" are inexplicably much later in flowering and will be removed from the box early to leave more space for the others, also they are not producing many buds.

Always gotta give the respect to fastbuds from all the hardwork they do to supply us with contest winings and bomb genetics ... THIS RUN will be an outdoors run the plant was started indoors and brought out after 5 days she is getting big allready .. The girl will be given a feeding when required probably week 4-5 and then there will be somebig training on the girls .. I'm excited this plant has been one of the tastiest flowers around.

These plants are loving life. Upped the food a bit this week, the dinamed was looking a little hungry. I will snip clones clones tomorrow. Hopefully I will have the flowering setup finished soon so I can move these girls over.

week intel: its time to harvest some of plants the ones that is mature enough. indica dominant plants will done first always so we should harvest them first because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. indica dominant plants will get done 1 or 2 weeks sooner than sativa dominant plants that will often takes more than 8 weeks so be aware to harvest them sooner. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.

Harvest time for LSD! Another successful grow in the books with this strain. Absolutely a joy to grow, love this strain. Thanks for stopping by growfessors, check back in 7-10 days for dry weight and smoke report. Update July 1, 99 grams dry and typical fruity/citrus flavor from LSD.

Plants are really starting to trich up! The Girl Scout Cookies has then EVERYWHERE! lol The Tyrian Kush is starting to turn purple which is exciting!

I apologize upfront for all the photos. It was hard to pick which ones to upload, so I picked a good variety. There is gonna be between 4-6 pounds once dried/cured. These were all super dense and very little larf. This was a higher temp/higher humidity run with lots of co2 and they blew up big. It’s been a minute since I’ve grown a cola or 2 that were bigger than my arm…this time there was dozens of them. Each plant was only topped one time. The temps were usually mid 80’s and humidity in the mid 60’s during flower. This might seem high to some, but learning to apply VPD to a grow should not be trial and error, in other words, this was intentional. It’s not risky either. During the first 6 to 7 weeks of flower it is very important to not let your night time temps to go below 75 degrees. POWDERY MILDEW=LOW TEMPS AND HIGH HUMIDITY. Take one of these away and there will not be any powdery mildew! Do not let your temps go below 75! The last 2 weeks I dropped the humidity to 40% and my night temps to mid 60’s for resin production. A couple of thing one should have to create large buds is a temperature gun(for leaf temp), a par meter and co2. Keep the stomata open and feed lots of co2=huge buds. Learn about VPD and not just a quick google search! When it’s dry and cured I’ll be back for an update on weight, taste and effects. Currently the plants are drying in the room at 60 degrees and 60% humidity until I can get in there to trim them. Might be 2-3 weeks. Thanks again for all the likes and comments!

Title: 100% ChatGPT-Guided Grow – 12/12 Fast Flower Test (With Supervision) Hey growers! This grow is an experiment: I'm letting ChatGPT guide my entire grow cycle, from lighting to nutrients to environmental tweaks. It’s all based on AI suggestions. Of course, I’ll still be keeping a close eye on things — if I see something going wrong or the plants aren’t vibing with the plan, I’ll step in. But the idea is to test how far AI can take a grow under controlled conditions. Strains – All from @Sweet_Seeds (F1 Fast Version): Mental Rainbow F1 Fast Version Tropicanna Poison F1 Fast Version S.A.D. Sweet Afgani Delicious F1 Fast Version Gorilla Girl F1 Fast Version Setup: Coco in 20L @MarsHydroLED SmartPots Grow tent: @SecretJardin DR240W Lighting: 2x 720W LM301H EVO LEDs 12/12 from seed Germination: May 14th / Main grow starts May 20th Nutrients: Hy-Pro Coco A/B CalMag Pro, @BAC Silica Power, F1 Extreme Booster Irrigation: Week 1 hand watering, then Blumat pH starts at 5.8 CO₂ supplementation via natural gas system (Spider Farmer GGS) Goal: Complete a full grow cycle in 10 weeks or less, from seed to harvest. Updates will be posted in a personal yet informative style — a hybrid of stoner chill and data-driven grow logs. Let’s see what AI can do in the grow tent. Stay tuned! 🤖🌿 🌱 Weeks 1–3 (May 20 – June 9) – Seedling to Early Flower (Stretch Phase) Goals: Strong root development, firm stem structure, controlled stretch Light: 12/12, start at ~500 PPFD → ramp up to 800 PPFD (day 14–21) CO₂: 1500 ppm (only active when lights are on and temps 26°C) Temperature: 26–28°C day / 22–24°C night RH: Start at 70% → gradually lower to 60% Nutrients (EC ramp-up): Start EC: 1.0 → increase to 1.4 Plagron Cocos A+B + CalMag Pro (0.2 EC tap water) Always mix Silica Power first (0.1 ml/L) Actions: Week 2: Start light defoliation on lower leaves Week 3: Begin LST if desired pH: 5.8 throughout the veg phase 🌸 Weeks 4–5 (June 10 – June 23) – Flowering Phase 2 (Bud Set) Goals: Initiate flower formation, maintain healthy leaf mass, stimulate bloom EC: 1.5–1.7 (monitor Blumat watering rate carefully) RH: 55–60% Nutrients: Plagron Cocos A+B CalMag Pro Silica Power (0.1 ml/L – only until end of week 5) Start B.A.C. F1 Extreme Booster at half dose, watered manually twice a week Light: 900–1000 PPFD if plants can handle it 🌼 Weeks 6–7 (June 24 – July 7) – Flowering Phase 3 (Bud Building) Goals: Develop dense flower structure, maximize flowering potential EC: Up to 1.8 max RH: 45–50% Nutrients: @Plagron Cocos A+B + CalMag Pro @BAC. F1 Extreme Booster at full strength Actions: Final defoliation at beginning of week 6 Inspect leaves regularly for airflow and mold prevention 💧 Weeks 8–9 (July 8 – July 21) – Ripening Phase Goals: Maximize terpenes, trichome maturity, flush medium Week 8: EC: taper down to 1.4 Stop using booster Optional single flush with enzymes (manual watering) Week 9: Only plain tap water through Blumat (~0.2 EC) Temperature: 24–26°C Dim lights to ~600 PPFD for final 3–4 days ✂️ Week 10 (July 22 – July 28) – Harvest Trichome check: Aim for 10–20% amber with a loupe Optional: 48 hours darkness before harvest Temperature: Keep low (20–22°C) to preserve terpenes Deadline: Harvest no later than July 28 Powered by the new 2025 @SpiderFarmerLED GGS system.. Detailed setup (only SF parts mentioned here): SF GGS Grow Light Controller (1x) SF GGS AC10 Kit (1x) SF GGS 6 Inch Clip Fans (2x) SF GGS 6 Inch Inline Duct Fan (1x) SF GGS SensorPro Kit SF Ultrasonic Humidifier May 20 – CO₂ moved outside, lighting dilemma, and a warm future ahead Moved the CO₂ generator outside the tent today. Immediate win: steady 700 PPM from just the pilot light, no active burn needed. When turned off, it drops neatly to 400 PPM, matching the calibration point. Double-checked with the Dimlux CO₂ sensor—readings line up perfectly. Still no tracking info for the originally ordered lights, so out of impatience I grabbed two new 720W LM281B fixtures from Germany this afternoon. Should arrive Friday/Saturday. It's a Trade Assurance order, so in theory, I'm covered. Now the question: let the seedlings coast at 259 µmol for two more days, or hang the old lights to boost them to 500 µmol? Eight out of twelve are already above soil, and honestly, I’d rather not mess with the current vibe. Leaning toward leaving them be—low stress, happy sprouts. Best part: temps dropped to 27.9˚C inside the tent now that the CO₂ generator’s out. Room itself is 24˚C, so all in all pretty chill. Curious what’ll happen once those dual 720W monsters fire up… it’s gonna get toasty, no doubt. 24/05: Stocked up on new Plagron nutes—finally. Now I can lock back into the full 10-week feeding plan (Plagron Cocos + B.A.C.). Flushing the res tonight and going full reset. Mixing fresh soup right after, dialed in to match this schedule: Week 1: Plagron Cocos A/B: 2 ml/L B.A.C. Silica Power: 0.2 ml/L Plagron CalMag Pro: 0.5 ml/L B.A.C. F1 Extreme Booster: 0 ml/L EC: 0.9–1.0 pH: 5.8 PPFD: 500 DLI: 22 RH Day: 70% RH Night: 65% CO₂: 700 ppm

Here it is. Vpd doin ok. Should transplant hopefully in 2 weeks and flower two weeks after. Using Unit farm uf2000 led.

How i wish i didn’t topped these 2 plants. :( too high too high alert😂😂😂