Hanging drying time

Day 14 Today marks two weeks since planting. The plant is showing steady development, with more defined leaves and stronger color compared to the first days. The overall structure looks healthy and balanced. The soil remains evenly moist, and the environment seems stable. No major issues observed so far. Excited to see how the next stage of growth will unfold. 💦💦💦💦Watering💦💦💦💦💦 Week 2 27.09.2025 – Watering 0 ml 28.09.2025 – Watering 0 ml 29.09.2025 – Watering 0 ml 30.09.2025 – Watering 500 ml Ph 5.6 01.10.2025 – Watering 0 ml 02.10.2025 – Watering 0 ml 03.10.2025 – Watering 0 ml

Hi all! 😊👊 Week 1 flower Remo nutrient Hp promix soil 7 gallons smart pots Aelius led 300gh Huge Defoliation 1 week before flower 1gallons water every 2 days

Week 4 has arrived She its more thirst with each passing day. Moby Dick hv 10 weeks of flowering probably. Waiting for next days, brazilian summer will be great. Cheers.

It is the end of week 7. Nice development on both plants, love that the right one has finally caught up in height, they will probably be harvested a few weeks apart. Need to start looking into getting a drying tent in order since I won't be able to chop both at the same time. Think I started to develop a little nutrient burn on the tips, but will continue on with what I am doing as far as nutrients.

Ganadora del primer lugar en la categoría autofloreciente de la copa Litoral de Los Poetas en Chile.🏆🥇 Definitivamente en mi top 5 de preferencias ⭐️⭐️⭐️⭐️⭐️ Una genética muy estable, ya que es segunda vez que germino de estas semillas y se expresa exactamente el mismo fenotipo; tonalidades hermosas y caractericas, frutos muy apretados y macizos cubiertos de una capa de tricomas lo que le da una visual espectacular. El aroma en frasco es una mezcla de frutilla ácida y tierra con un fondo dulce 🤤 es realmente exquisito. En la fumada se repiten gran parte de los aromas pero menos dulce y más cremoso y especioso, detodas formas es un humo genial que querrás fumar todo el día..

👉Its week 11 and the plant is looking beautiful. Lots of bud sites all over the plant. The plant is looking healthy and seems to be thriving. The tips of the leaves on the new growth at the top of the plant show a brown. I had a day when the outflow of the fertigation was +30. I did a low EC fertigation right away and more regular EC. Since then Ive kept the run off within 10 by preceding ever other fertigation with a low EC feeding with just enough volume to get a few mls of run-off. On the GHE drain to waste feed chart Im on Mid-Bloom mixture. I am guessing it may be 2-3 weeks before its in 'late bloom' stage. Im still mixing full strength and the EC for a batch is 1.5ms. While I believe that by allowing the run-off of fertigation to reach +30 is what cause the brown tips. Im also mindful that I may need to dilute the batch a little. To see the effects of nutrient/media issues it can take a couple of days if its subtle. So if I continue to see the bright green tips of new leaves turn brown then Ill lower dilute the mix. Ive seen no other possible indicators of negative issues. 👉The plant is filling out nicely all over. Marble sized fuzzy pearls are scattered all over. There isnt much aroma besides the typical young cannabis plant smell. Ive squeeze a couple small buds, there are visible trichomes and its sticky to touch, but no notable aroma. The trichomes are coming out all over the place and it should make for a very fuzzy plant. 👉I have removed a couple more small branches and shaded leaves and will only take vegetation that is showing issues or totally shaded and showing lack of vigor. I have installed the bamboo steaks that I will use for support for the branches. I attach them to the metal posts attached to the hoop around the base of the pot. This keeps the steaks out of the media. The Plant is 36" and the early flower stretch seems to have slowed. I have 6 more inches of light adjustment height before I have to resort to spreading the light supports and angling the lights to allow for more height. 👉This coming week should be more of the same as 99 slowly matures. I have a new fan that I may install. Currently I have a 4" 190cfm exhaust fan (vented outside). I anticipate as temperatures drop outside my tent temps with rise like they did last spring. Im not using a cob light this time and surprisingly the temps have stayed steady at 78-80. The new fan is a 6" and 440cfm. I have a variable speed controller to use on it and will hopefully be able to have more control and success at maintaining cool temperatures better during the more mild weather (sounds convoluted I know).

Veg54, riego con 6.2 pH y EC 1.5, drenaje de 2.0 EC y pH 6.3, todo ok. Las plantas ya alcanzaron entre 25~30cm, en 2 días más comenzará la pre floración. Veg56, están casi de 30 centímetros de altura, último día de vegetación, mañana entrarán a pre floración, necesitan una defoliación.

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. Remember, For every molecule of glucose produced during photosynthesis, a plant needs to split six molecules of water. This process provides the hydrogen needed for synthesizing glucose and other organic compounds, while oxygen is released as a byproduct. Homework. If Rubisco activity is impaired and it cannot properly function or regenerate its substrate, the plant's leaves are likely to turn a pale green or lime green, a condition known as chlorosis. Essentially, Rubisco activity is highly regulated and susceptible to various environmental and metabolic factors that can cause it to become inhibited, leading to an apparent failure in RuBP regeneration due to a lack of consumption. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration. RuBisCO is a very large enzyme that constitutes a significant proportion (up to 50%) of leaf soluble protein and requires large investments in nitrogen. Insufficient nitrogen supply limits the plant's ability to produce adequate amounts of RuBisCO, thereby limiting the overall capacity for photosynthesis and carbon fixation. Maintaining the optimal, slightly alkaline pH is crucial for the proper function and regeneration of Rubisco. Deviations in either direction (too high or too low) disrupt the enzyme's structure, activation state, and interaction with its substrates, leading to decreased activity and impaired RuBP regeneration. (Lime/yellowing) Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. For those high-intensity workouts when 1 meal a day is just not enough! Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The plant was getting a little limey yellow in the centre. Shortly thereafter, she was back in business, green mostly regenerated. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Confidence is evidence... nothing more. You are confident because you have driven 10,000 times, you are confident because you have spoken 10,000 times. People think confidence is a feeling, but it's not. If you want more confidence, then you need to create evidence, take more shots, collect more data, build more experiences, take more risks; fail, confidence doesn't come first; it is the reward you get for doing the work. no one else wants to do.

(Days 21-28) (Day 23) I like the amount of stretch I’m seeing on practically all the plants. I'm going to lower the light at the end of the week to stop the stretch. The more stretch they get in veg the less I have to lollipop or prune down the road. Makes lst easier too. I’m going to try topping this week. Last time I topped at the 7-10th nodes and didn’t get the best horizontal growth. This round I’m ready to give everything 3 or more toppings, stay on top of training and defoliate much less. This soil looks insane. I should have added a thicker layer of oats because it’s starting to look proper. (Day 24) Got my stuff from the hydro store today and amended my soil again. Next visit I will be grabbing a P booster like bat guano before I enter flower. Today, I got the 2gal pots, some primo worm castings, 5-2-4 insect frass, 0-0-22 langbenite, 1-0-3 alfalfa meal and an exhale co2 bag. Guy at the store said it gets his 4x4 tent 1000ppm+. It takes a few weeks at least for it to start putting out any amount of co2. I got the room sealed and two fans bowing. I fed a compost tea with a little bit of each dry amendment, BSO dry compost, boogie brew base and worm castings aerated for 24h. I diluted it to about 850ppm which still might be a little high. (Day 25) Opened a bottle of EM1 that was improperly stored and it exploded all over me and part of the tent. I wiped off the plants but there is still specks here and there. Cleaned it off and sprayed with method1 pps. (Day 26) Topped 9/15 plants. Will do the rest next week once I see a little more growth. 5 of the bbb’s I started 6 days after everything else so they are still quite behind. I’m going to push the transplant another few days until they recover. Going to start lst after transplant. (Day 28) Transplanting into 1.6gal pots that I thought were 2gals tonight... Depending on how many females I get, they will be going into either 3, 7 or 10 gallon fabric pots. Growth is looking solid so far, zkittlez and the 3 WW’s are leading the pack in terms of growth speed and cotes are yellowing out. I’m pretty sure what I have is a zkittlez bagseed but there is also a strong chance it could have been from some shitty Canadian biker weed. I accidentally misplaced the seed so it’s possible it got mixed up and I germinated the wrong one. Judging by the rapid growth I’d say that’s a fair bet. Biker weed is notoriously fast growing. Either way it won’t be hard to tell once they’re in flower. The white widow is probably going to be a breeze. I’ve heard that’s why it’s so popular too. It’s just a hardy rookie strain with good resistance, decent quality and above average yield. A sure investment. The blackberries are lagging behind but I’m sure they will blow the others away in terms of quality. One of the tunas looks great and the other is a stubby runt. The stubby runt I currently have in flower is killing it right now so I’m not writing it off yet. Can’t wait to see if the tuna god produces some nostalgic smells. Tuna strains are still super popular on the Canadian black market. I plucked the first set of leaves that were starting to appear on each plant. These branches almost always turn to larf and they're so small I can't that stressing the plants out at all this early. If anything, the zkittlez and white widows need to slow down a bit anyway. I’ve been doing a shit ton of research over the past year into what causes weed and cigarettes to have black ashes/poor fire holding capacity. Smoking black weed drives me crazy because it’s all the legal and black market have nowadays. The cigar industry has numerous studies on the cause of ash color and burn rate and apparently it has to do with the ratio of mineral content in the soil/water. Soil/water that is high in phosphorus, magnesium, chlorine and other heavy metals will burn poorly and reduce to flaky black ashes. Whereas soil that has higher levels of potassium and calcium carbonate have thick uniform white ashes with no streaks. Calcium carbonate (wood ash, biochar) can also prevent heavy metals in the soil making them unavailable to the plant. I’m discontinuing my “Organic cal mag” as it is full of chlorine which I did not realize when buying it. I’m going to be pretty cheesed if that stuff ruined the burn of my current flowering crop. My dog also found and destroyed my Alaskan fish fertilizer so that’s being discontinued for now too.

The nice weather has finally returned, and it should stick around for the next few weeks. It's just in time for the last couple weeks of the ladies. ☀️☀️☀️

Start of week 7 Day 51 was the hottest Day ever 😫

I got a Mimosa to save! It is about 2 months old and is growing in soil and has only been illuminated in 18/6. It has problems as you can see I will try to get it under control in the next few weeks. Until then there will be a weekly update

Christmas Entries & Memes this week! Flowers look great! This entire round, every strain looks fire!!!!!

What up Grow Fam. Weekly update on these beauties. They've stopped the stretching part and now started focusing on flower sites. Seeing the flowers swell almost daily is wild to watch. I started to drop the night temps down to low 60's and around 70 with the lights on. All in all Happy Growing

Welcome to my Purple Haze Autoflower Diary sponsored by MSNL & Xpert Nutrients. Days 36-48 weeks 6-7 of pre flower day 2-15 Plant is responding really well having 14hrs of light under my FC3000, and I've been using IR to give my fems extra flowering time & this has suited my Autoflowers really well. New nutrients i see huge improvements in all of my Autos not only from MSNL but crop wide. Root Zone increased 3x easily. Been organic/mineral you need to PH to 6.7 for soil. Are ideal 6-6.1 ph in-between coco/soil and you adjust as needed. Really happy with their push for my plants. She has put on a nice bit of height. Her smell is very new to my grows, as I've not grown a purple haze or smoked it in years. Fruity, like a soda, typical PH, can't wait to taste this girl. (She's currently just been taken out of my tent into dry room, I'll hang her in a few hours) FEEDINGS/DLI DLI is around 40-41 700-730 ppf over 14hrs with UV-A calculated in. Core NPK feeds have been only 1x every 5-7 days 450-550 ppm, next week I'll start adding there pk /bloom booster. Master root & everything else brings the general ppm per day 7-1000 with enzymes & master root having huge EC change to water. (Note? This is a different kind of EC, bacteria/enzymes & amino acids have a high EC input but aren't counted as core NPK feeds, which have been 450-500 "master bloom parts A+B) Thanks to MSNL & XPERT NUTRIENTS for their support & sponsorships. Much appreciated. Shout out to yall for stopping by. I look forward to seen your diaries. Either way thanks for dropping by.

This week was mainly about making sure there are no leaks in the RDWC system. I germinated the seeds straight in to the easy plugs and placed them in the the net pots surrounded by clay pebbles. The Fastbuds genetics did the rest and came through with a 100% germination rate. I will leave them running on clean water for the next couple of days. I will be making sure to monitor ph balances closely. In regards to oxygen for the roots I constructed a waterfall system with added air stones from my air pumps to cater for healthy root development and sufficient oxygen. Even though I have a lot of light in there, I have them all dimmed down to their lowest percentage.

Esta semana apesar de tener temp Máxima de 28... se va recuperando bien de las podas, el led de TodoGrowled funciona perfectamente para sus 55w farmers!🍁