Likes
Comments
Share
Planted 4 seeds of AK48 Auto directly in the soil. I used toilet paper rolls as cups. The first seed sprouted on Day 6.
Likes
19
Share
@Hashy
Follow
******************************************** Week 11 Mid flower (week 7 flower) ******************************************** Light cycle=12/12 Light Power=140w 59% Extractor controller settings (during lights on). High temp= 26c Temp step=0c High Rh= 48% Rh step=0% Speed max=10 Speed min=3 Extractor controller settings (during lights off). High temp= 20c Temp step=0c High Rh= 53% Rh step=0% Speed max=10 Speed min=3 Smart controller settings (during lights on). Lights on=9.00am Radiator on= -19.0c Radiator off=+19.5c Smart controller settings (during lights off). Lights off=9.00pm Radiator on=-18.0c Radiator off=+18.5c VPD aim=1.0-1.5 DLI aim=40-45 EC aim=1.0-1.8 PH aim=6.0-6.5 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 NPK= 8-17-26 Method= Automatic Feed=Flower nutes Neutralise=0.1ml/L Plagron bloom=4ml/L Plagron Power buds=1ml/L Green Sensation=1ml/L Easy Ph down=0ml/L (1ml=24 drops, 1 drop=0.04ml) Easy Ph Up=0.021ml/L (1ml=24 drops, each drop is 0.04ml) Ec=1.55 PH=6.2/6.0 Runs=8 Run times=3mins (0.75L/0.375L each) Gap times= 17mins Total runtime=24mins(6.0L/3.0L each) Total flowrate= 0.25L/min(0.125L/min each) Auto start time=10.00am Auto stop time=12.23pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅19/4/25 Saturday(Day 71) 💧 Manual Flower nutes Ec=1.5 PH=6.3/6.0 Volume=7L Volume left=1L Volume used=6.0L Volume each=3.L Runoff. Total runoff=0.7L Ec=3.4 PH=6.5/6.3 💧 📅20/4/25 Sunday(Day 72) 📋H=91cm D=19cm Dli=43.8 PPFD=1010 📅21/4/25 Monday(Day 73) 📋 📅22/4/25 Tuesday(Day 74) 📋 💧 Automatic water Ec=0.14 PH=6.9/6.4 Volume=8.0L Volume left=2L Volume used=6L Volume each=3L Runoff. Total runoff=0L Manually 1L each Volume each=4L Total runoff=0.7L Ec=2.6 PH=6.5/6.3 💧 📅23/4/25 Wednesday(Day 75) 📋 📅24/4/25 Thursday(Day 76) 📋H=91cm D=19cm Dli=47.0 PPFD=1090 Lowered light power to 130w H=91cm D=19cm Dli=44.0 PPFD=1020 📅25/4/25 Friday(Day 77) 📋H=91cm D=19cm Dli=44.0 PPFD=1020 ******************************************** Weekly roundup. 📋 What can I say, this is producing some chunky flowers, stunning plant, has suffered a little on the main cola through the light being close, but I'll be reducing light intensity from this point. Back soon. Take it easy. ********************************************
Likes
76
Share
Plants are stretching, It is necessary a lot of work to set them well. (end week 04/07/21) Now i stopped use veg fertilizers and now we will point on flowering. Scrog net is awesome. Super useful and easy to use. I belived that it was harder. Keep growing ehehehhe
Likes
12
Share
@L_Choppa
Follow
the gorilla cookies came out really good i wish i couldve done more lol the buds were a little air but the potency is really strong im satisfied with this strain i do plain on doin this one again
Likes
12
Share
Another week has flown by! The girls are doing great, cruise control this week as I have just been monitoring RH and temps. Trying to keep them as low as possible, I’ve been getting as low as 74 during the day and 68 at night. I finally took a look a look at the trichomes with my jewellers loop, lots of cloudy, and a few amber around the leaves and top colas, but still lot’s of clear trichomes. I’ve ordered myself a wireless/usb digital microscope to assist with the process, and looks like it will be here just in time to determine harvest day. 😎🎄 I started by eliminating the nutrients at the beginning of the week. I typically allow for 3-4 pure water feeds before I harvest, and at the rate they have been drinking, this should be enough to get through the 7-12 days they have before harvest. I don’t flush, but rather “rinse” with normal water amounts, allowing the plant to use up the remaining nutrients in the soil. This also allows me to recover most of the soil from my grows and reuse ♻️ with other soil mix. There has been great debate and a great deal of bro science out there for many years, but the recent studies suggest there is no difference in end result when it comes to flushing or using nutrients right until the end, if a proper dry and cure is performed. What do you think? What do you prefer to do? Thanks for reading this far, leave me a comment with your preferred method 👊🇨🇦❤️
Likes
24
Share
Vegetation: To keep temperature and moisture on optimal levels at around 23°C / 65% I'm using two mechanical timers. - 24/7 on: Fans and water pumps (+Ventilation after 3.11.) - Timer 1: Lights and Humidifier 18h on / 6h off - Timer 2 (BROKEN 3.11.): Ventilation 18h (15min on / 15min off) / 6h off NOTES: Everything looks good and the roots have appeared from almost every (11/13) rock-wool cube. From now on I'll mostly water the plants from bottom by adding the wanted amount of nutrient solution on a plate, and then placing the plant on top of for ~15seconds This week I'm also starting to prepare the hydroponic systems (2x NFT-GT90, and 1x EBB-flow I think) and stronger nutrient solution since my plants are becoming ready to be transferred. Spreader-mat is the base of my plants when I have transferred them in to the hydroponic systems. DO NOT place more than one layer of the spreader-mat as it is not meant to be used like that! As you're cutting the mat for NFT's, be aware to have some extra for your peace to reach nutrient solution below the tray. That way you won't get noise from water dropping when systems are turned on. Day 15 (1.11.) Day 16 (2.11.) First watering with a bit stronger nutrient-solution (~ EC 0,6 / pH 5,9) than before, starting with 50ml/plant and watering once from above. Slowly increasing EC to 0,8. I cleaned and assembled 2 out of 3 hydroponic-systems which I'm going to use. I'll do the same also to the last system, but it currently has my plants on top of it so I'm going to do it later. I want to make sure that my plants have built healthy and big enough root system before transplanting to hydroponics. I'm waiting for the rock-wool cubes to be bursting of roots so they won't drown on their first day in hydro. Also, as the plants are bigger before the transplant, I'm able to fill my nutrient-solution tanks full with correct strength nutrient-solution for Mid-Vegetation from the start, therefore no need for that much adjusting later on. Day 17 (3.11.) I noticed my other timer which controls the lights had stopped working... The lights were on when they shouldn't have been, I noticed it an hour after they were supposed to turn off. I think I caught up to it early, but it may have been on for maximum of 2 days straight. No worries there since on vegetation-phase the plants don't necessarily need any sleep (Even though you should avoid quick changes like that!). Roots have appeared from the bottom of every cube and plants are looking pretty healthy. I think they are almost ready for hydroponics. Day 18 (4.11.) Few plants are showing symptoms of nutrient deficiences or some sort of sickness, not certain what exactly. I'll be keeping an eye on it. I'll be transferring in to hydroponic systems in maybe a week, so I don't want to stress my plants more than what's necessary. Increased my solution strength to 0,9 EC with a bit more Cal-Mag than before, and watered the plants for 50-150ml each plant depending on weight and size. I'll be slowly increasing the strength by around 50% during upcoming week. Thanks for tips! Day 19 (5.11.) Day 20 (6.11.) Plants are recovering well from deficiences and I just transferred all of them to hydroponics. I don't have the water pumps on for 24/7 just yet, at this point I water them a couple times a day by keeping the pumps on for somewhere around 15min at a time. Lights are now set to 60% and I also added a tower fan to circulate the air and shake the plants. Day 21 (7.11.) Lights are now set to 70% since the Led's and plants are spreaded wider in the tent than before. Distance to plants stays the same at 75cm.
Likes
42
Share
@MrJoint
Follow
🍁Dicas e sugestões? As meninas agradecem. 📸Update de fotos, vídeos e informações diariamente. DAY 15 Muito feliz com a germinação da COP, ela está se desenvolvendo muito bem. Good girl! 💡Coloquei a luz em 50% de potência e gostei do resultado. 💦Reguei a C1 e C2 (250ml cada) com BACTOHEMP bacilos e bactérias + Acophyllum extrato de algas. Elas parecem felizes :) DAY 16 Escoras de apoio para C3 e C4 até o transplante. COP está muito bem. O transplante será realizado antes das meninas dormirem (menos stress para as raízes) e serão regadas com 💦1L de água + 🥄1 colher de chá de BACTOHEMP. DAY 17 C1 e C2 estão cheias de vigor. COP e C4 reagiram muito bem ao transplante. C3 um pouco triste com o processo. DAY 18 Todas as meninas estão lindamente bem! C3 já está com mais saúde e feliz, 24h após o transplante. 📝NOTA: 💡Aumentei o dimer do Led para 75% ⚠️Temperatura aumentou 3°C no growbox. DAY 19 🚫🐜Antes das meninas dormirem vou borrifar óleo de neem (250ml) para evitar pragas e insetos. DAY 20 Hoje foi dia de beber água! Dia de rega, as meninas estão todas saudáveis. DAY 21 C1 e C2 estão com muita sede! Estava regando 125ml/dia, hoje aumentei a para 250ml/dia. Após a difícil germinação COP está crescendo muito bem. 🎃Obrigado por verificar o meu cultivo.
Likes
48
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Flowering day 49 since time change to 12/12 h. Hi everyone :-) . Every day it is a pleasure when I open the tent. The scent flows through the whole tent and the buds swell more and more. This week I added PK 13/14 and increased the Ec value to 1.6. The whole thing now stays for 7 days before I use completely fresh water with an Ec of 1.2 - 1.4. Otherwise everything was cleaned and checked like every day. Stay healthy 🙏🏻 You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧
Likes
17
Share
Gracias al equipo de Zamnesia, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Frosted Guava: La Frosted Guava es una cepa índica dominante y súper resinosa, que es un cruce de la Guava y la Frosted Skywalker. Con unas características de cultivo muy versátiles, un aroma exótico y afrutado, y un subidón relajante y lúcido, la Frosted Guava es ideal para cualquier plantación de marihuana. 🌻🚀 Consigue aqui tus semillas: Código Descuento 20%: ZAMMIGD2023 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 3: Ha sido una buena semana, ella ha dado un gran cambio en su lugar definitivo 😎. Se le ha aplicado un tratamiento insecticida con agua + tierra de diatomeas ( 1 cucharadita por litro de agua), también se le aplica un tratamiento fungicida con una infusión de cola de caballo para evitar futuro moho. A partir de ahora se riega manualmente con las dosis recomendadas por el fabricante.
Likes
44
Share
@Roberts
Follow
Bubba Kush Mintz Autoflower is doing great. I think I have a pest issue in the grow room. So I am treating her with neem oil. I will repeat a spray and wash off treatments a few times this week. Hopefully it stops them, and my plant can be happy. She didn't have them directly that I can tell. But neighbor plants do have some issue. It is my last ditch effort to treat them prior to them flowering. Neem is gross on buds. Beside that she got lollipopped and defoliated. Looking good till neem wrecks the leaves. Thank you Aeque Genetics, Athena, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
68
Share
Deoliated and trained! Even did a little video showcase! In love with this round from Fastbuds!!!!! Gonna get a great harvest!
Likes
20
Share
Since I am in DWC and the fertilizers are organic, I take care to add them slowly.. Como estoy en DWC y los fertilizantes son orgánicos, me ocupo de añadirlos lentamente... Por el momento no controlo la atmósfera, sólo tengo un extractor ajustado a 400m3/h para los 2 lumatek al 75%. Planeo controlar la atmósfera a partir de la inyección de CO2 en la semana 2 o 3 para ver más. Mientras tanto tengo algunos picos de temperatura por encima de los 28 pero son realmente específicos. Estoy tratando de mantener la humedad lo suficientemente alta para tener un buen VPD. For the moment I don't control the atmosphere, I just have an extractor set at 400m3/h for the 2 lumatek at 75%. I plan to control the atmosphere from the CO2 injection in week 2 or 3 to be seen again. In the meantime I have a few temperature peaks over 28 but they are really specific. I am trying to keep the humidity high enough to have a good VPD. Subí un poco la ec este fin de semana 4 de 0.9 a 1 I turned up the ec a bit this weekend 4 from 0.9 to 1
Likes
8
Share
A few had issues with the 24 hrs light sa few plants were getting yellow tips resembling light burn. So I added a teaspoon of Epsom salt and coffee grounds. Looks like the plants have bounced back. That’s a sigh of relief!
Likes
12
Share
first strain runtz start 11/03 indoor, now outdoor guerrilla... hope for a good season second strain watermelon zkittlez, hope for better wheater (actually indoor). sicilianguerilla
Likes
50
Share
It’s time for the flush to begin. This lady has been a pleasure to grow. Although I ran into a few bumps but it happens. Not much I can do about it. It’s life. Thanks for stopping by. 🙏🏼🙌🏽
Likes
2
Share
Transplanted all to 15 gallon pots. All looking good started seeing new growth very quickly. They seem like very happy plants. Next week the new tent comes in and the new lights
Likes
34
Share
@RFarm21
Follow
Alimentação: 11 janeiro Cant wait to smoke ir 😌