These three girls got transplanted today into their five gallon fabric pots. They were looking hungry so decided to do it early. I normally wait till 3.5 to 4 weeks. They were added to my custom mix of coco with perlite and added amendments, worm castings, and purple cow soil. Watered first with dechlorinated tap water and next with added mycos and cal mag.

Strain: Black Haze ((Sir Jack x Skunk Auto) F6 x Pakistan Chitral Kush) F5 Breeder : Exotic Seed Autoflower 10 Weeks Week 1 (Day 1-7) Planted seed into 1,5 BioBizz Lightmix/ Plagron Perlit and added a few grams Mycotrex Setup:GrowTent: 100x100 Secret Jardin HS100 Exhaust: PrimaKlima PK125WHSP-EC Filter: PrimaKlima K2601-125 ClipFan1: AC Infinity Cloudray A6 ClipFan2: AC Infinity Cloudray S6 Fertilizer: BioTabs / only Water strategy Soil: Biobizz Lightmix + Plagron Perlit

The girls have basically exploded this week! They were drinking a ton and have responded really well to the steady increase in nutrients. With the room being basically self sustaining, it’s been a lot less work. Yesterday was the second round of defoliation and because this is my first time getting this far, I decided to be pretty moderate. There’s a few plants I took quite a bit off as an experiment and they seem to be doing great! The guy at my local hyrdo store recommended GH Floralicious Plus for flavor and smell, so I decided to try it out and this is some pretty potent stuff. After their first feeding of the Floralicious they are smelling delicious! The one plant furthest into flower is starting to show some fade in the lower leaves, she will certainly be done before the rest. She has a very sweet and sour aroma, especially if she gets rustled around a little bit. I’m stoked for the rest of flower and seeing their progress. Also I haven’t seen a fungus gnat in weeks so those yellow sticky traps are a must.

It s ok. She will be great:))

Week 6 and we are reaching for the skies! LOL...it's a good thing but also bad...as she is starting to get light burn on the top main cola...my light is the highest it can be so I'm hoping that the Fox Farms Nutrient, Open Sesame, stops the stretch and focuses more on bud development. She will get fed on Friday! I absolutely love watching my Runtz grow, I want massive trees in my tent now...I used to go crazy with the LST during veg weeks 4-5 and introduced open sesame earlier because I never wanted tall plants before...my first grow had tons of light burn and my tent is tiny!!! Just a little 2 x 4......but now I am steering that way...I just think the tent looks more beautiful....tall lengthy trees as opposed to short stumpers which is what I have been growing from the start :P Went in with some more LST...at week 6 is usually when I try to go minimal on the manipulation but with how lanky she is...I think there's more room for some surprise colas to make an appearance! Also, I took the SCROG netting out...I want more experience with growing before I start messing with new growing techniques..if you made it this far into reading wow congrats! LOL and Happy Valentine's Day....it's a day about love...loving yourself, your family, your pets, and of course your PLANTS!

week intel: everything is perfect! stresses : just a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 818 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 382 ppm - 0.7 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 250 ppm - 0.5 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : know your plant tolerance limit of E.C stress once you saw the very very little yellowing on tips of leaves , that's the sign to don't go further , never reach that limit if you want a high quality buds, in my case tolerance is 1.8 and i'll reach to that level only once a week to cause precision stress , love your plants and have a happy growing!

Day 49 - the plant stretch 8cm and morę buds formating, the plants start spreading nice smell and the buds should start getting bigger and fat in upcoming weeks.

Stacking up to be some certified donkey d!cks! Serius Seeds

Buds are starting to form now . Both alien phenos are budding faster than the other 2 strains . Gave them a good defoliation this week and they seems to have perked up . Lollipoped some more nodes also. They are still stretching .

Buenos pues nada..un saludo! Aqui tenemos unos regalos de eurogrow. Teniamos 10 runtz y solo an salido 4 y esperemos que no fallen.3 bud bunner.1 girl scout cookies de frenetic seed y una lemon hace. Bueno pues ya estan puestas en macetas de 7 litros es su segunda noche de armario todavia no an salido...os iré dejando fotos y videos para que me hecheis una palmadita.me encantaria hacer supercroping esta vez que opinais???un saludo amigos desde España

Start of Week 4 flower | barely have enough space | the lamp is quite close | adjusted the light capacity | some leafs have burn but nothing special | i feel like this is gonna end quite well | i also installed a second scrog net just in case

Passage en floraison le 10 septembre 😍 début du stretch intéressant maintenant que je connais bien la variété je peux m'amuser dans la culture 😍 objectif 175g 😍

Day in and exit fan 15 min off 15 min on Van is full on Night in and exit fan 30 min off 15 min on Van is off Lst tranings return Day 35 Short Flowering 2gr/1L 1Liter Per Pot Day 40 Short Flowering 2gr/1L Booster 1gr/1L 1Liter Per Pot

1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.

The plant is developing well despite the high temperature. During the week the weather got better, the plant is growing well.

Week 6 - Maybe the last vegetative week. Everyone is topped and LST. I think I will let them grow in peace this week (Ill just fix the lst, no more toppings or cutting fan leaves) and install my scrog net

🎩🌈🍬

Last Sunday I increased the nutes so that the ppm was on the higher level (600-625) as the feeding schedule showed. Dec 9th I started to see some lime green (video) leaves on new growth. The ppm would go up mostly & down slightly, but the lime green spread & eventually turned yellow (last pic from today). I did a water change the other day & lowered the ppm/nutes to around 575-580 range. I've been reading around that this might be a sulfur deficiency? Some suggested adding Cal-mag. Today I added 2 ml more of Cal-mag & snipped some of the darker fan leaves that had some damage. I ordered epsom salt, waiting for it to arrive (tomorrow). Any other suggestions/diagnoses are welcomed! 😊