Likes
Comments
Share
Well, this is it. Wish I had bigger buds. Everything was moving in the right direction until the end. I switched the Mars Hydro 3000 out with two HLG 300s, so I could maintain the PAR just under 1000, but perhaps it wasn't enough. G13 is definitely not ready, and could benefit for a couple more weeks, but like a store liquidation, THEY ALL MUST GO NOW All in all, Learned a lot. No seeds, reveg, or signs of mold, so hopefully I'll make up for quantity with quality. Only Dry Time will Tell...
Likes
Comments
Share
@jporfiado
Follow
Las plantas se ven bien, hice una pequeña defoliacion para sacar las hojas grandes que hacian sombra directamente sobre otras ramas. Ademas quite algunas de abajo que me complicaban un poco a la hora de regar.
Likes
3
Share
Привет садоводы !!! Растение чувствует себя хорошо поливаю ее примерно плюс - минус раз в неделю , литров по 6-7 чередуя с водой и удобрениями PH 7
Likes
43
Share
We are 14 days since switching the lights to 12/12 and this one didn't waste any time hitting flower. She is stretching fast and starting to stack on budsites already. Gave them the weekly flush and fresh nutrients. I will be cutting out the maxigro and start them on liquid Koolbloom next week.
Likes
20
Share
@MrWolfe
Follow
The stretch is real, they are being fed every other day, 1gal/plant basically. Nice uniform stretch along both rows.
Likes
35
Share
welcome to Day 76 3/3/2021 glad to have this harvest under my belt she has some very nice looking buds and I cant wait to smoke them. there are more updates on the way as she dry's out and I get the real weight update Day 79 3/6/2021 the dry is finished and its all weighed up. on my trial smoke it was very smooth and tasty and a pretty strong head high but not over powering. I uploaded macro shots just for you fellow growers it was a small harvest but it was a small plant so I'm happy I got that much 😀🙏
Likes
8
Share
4/1: Fed today after topdressing with guano and rock phosphate. 4/3: Flipped to 12/12 today and started UVB stressing with 2 x 30-minute sessions a day. 4/4: Fed today and foliar fed with Axiom harpin proteins and boom boom spray. 4/7: Fed today..started adding a little Open Sesame and Signal to the mix along with sweet & sticky, One, silica, and calmag.
Likes
10
Share
Les bourgeons sont biens lancés grossissement de jours en jours.😍
Processing
Likes
7
Share
Likes
7
Share
Week 3F begins. Raised the light a bit, will see if it makes a difference with the leaves. Bud sites are popping and looking good for their small size. Thanks for stopping by.
Likes
92
Share
Week 5 Veg Report: SCROG Netting, Massive Leafs & Precise Data Mastery! 🌱 Girls Growing Stronger Than Ever! 🌱 This week has been truly epic in the grow room—so much so that it’s time to bring in the SCROG net! With the canopy expanding and the younger ones still working to catch up, the SCROG net will help me achieve that perfect, even canopy. A well-placed SCROG not only ensures better light penetration but also gives the smaller plants a chance to spread out and thrive alongside their bigger sisters. Now, let’s dive deep into the SCROG method. The Screen of Green (SCROG) technique is a grower’s secret weapon for maximizing space, light efficiency, and yields. The concept is simple but powerful—train the plants to grow horizontally along the net, forcing them to expose multiple budding sites instead of just a single cola. This way, the canopy spreads evenly, improving light distribution and air circulation throughout the tent. As the plants grow, I’ll gently weave their branches through the screen, ensuring they fill every square inch of space. The end goal? A sea of buds all basking in equal light! 💪 Huge Leafs Everywhere! 🌿 One thing that’s really catching my eye this week is the size of the leaves—they’re HUGE! Honestly, they’re so big I couldn’t resist a little fun, so I made myself some fashion accessories: leaf earrings and a cap from the Super Sativa Seed Club Green Papaya! 😂 And, of course, I captured the moment. But seriously, large leaves at this stage are a great sign of healthy, robust plants. These “solar panels” are hard at work soaking up all the light, driving photosynthesis, and fueling growth. So, what does it mean when your plants are showing off big, luscious leaves? It’s a clear indication that they’re happy, healthy, and thriving in their environment—big leaves mean lots of energy being produced and stored for future bud growth. Exactly what we want! 💧 Precision Feeding with Aptus Nutrients 💧 This week, I took a deep dive into my Aptus nutrient lineup and shared a video explaining how each product affects the water’s pH and TDS. Using the AMP-3 Precision Meter, I’m getting real-time water readings and keeping everything dialed in perfectly. Let’s break it down: • pH: 5.83 • TDS in solution: 445 ppm • Water temperature: 25.2°C The Aptus products are incredible for balancing nutrients without throwing off the pH or TDS too much. I’m fine-tuning my feedings based on these readings to make sure the girls are getting exactly what they need. The precision I’m able to achieve with the AMP-3 is mind-blowing—I get immediate feedback on pH, temperature, and EC, allowing me to make real-time adjustments and ensure the perfect environment for nutrient uptake. 📊 Environmental Mastery Thanks to TrolMaster 📊 Speaking of control—let’s talk about the TrolMaster system! Between the DSH-2U Humidity Station and all the other sensors, I’ve created the perfect environment for my plants. Here’s where we’re at this week: • Temperature: 26.2°C • RH: 70.6% • CO2 levels: 775 ppm • VPD: 1.0 kPa • PPFD: 423 Thanks to TrolMaster, I can monitor and adjust these metrics in real time, and the best part? I can do it all through the TM+ Pro app, even while I’m lounging in my green papaya leaf hat! 😆 Whether I’m checking the CO2 levels, adjusting the lights, or fine-tuning the humidity, it’s all in my hands with just a tap of my phone. Talk about convenience! 🌱 P.S. – Inline Sensors: Heavy-Duty Precision 🌱 Now, let’s talk about the heavy-duty players in this game—the (PCT-2) Heavy Duty Inline EC/Temp Sensor and the (PPH-2) Heavy Duty Inline pH Sensor. These bad boys are connected directly to the AMP-3 Precision Meter, and they’ve been absolutely crucial in giving me the most accurate readings on my water and nutrient solution. The PCT-2 keeps me informed about the electrical conductivity and temperature of my solution, which is key for monitoring how well my plants are absorbing nutrients. Too high or too low, and we’re asking for trouble, but this sensor ensures I’m always in that perfect range. The PPH-2, on the other hand, is all about maintaining the perfect pH balance. A fluctuating pH can mean nutrient lockout or deficiencies, but thanks to this sensor, I get a constant read on my pH levels, so the plants are always in their sweet spot for optimal nutrient absorption. Together, these inline sensors allow me to run a super-tight ship—every drop of water and nutrient is dialed in to perfection, keeping the plants happy and healthy! Shout Outs! As always, huge thanks to TrolMaster and ThinkGrow LED for the amazing gear, to Aptus Holland for their top-notch nutrients and Pro-Mix for the best soil i have used so far. Big love to the seed banks, the amazing Grow Diaries community, and all my followers—you guys make this journey so much more exciting. Don’t forget to catch up on my social media, Instagram, and YouTube for real-time updates and exclusive content! Stay tuned for more—next week is going to be epic! DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off Growers Love to you all 💚💚💚
Likes
3
Share
Phone was out of action , will try and fill up the missing weeks , 3 plants have been harvested All photos taken day 76
Likes
9
Share
Likes
2
Share
@Wondrej
Follow
One love Growmies 💚🇯🇲 Week 3 hitting around. 26.11.2025-Day 16(Week 3) November 25th, officially kicked off Week 3 of Vegetation. That means our girls are today 16 days into the active veg. cycle (measured from the first cotyledons on 10.11) so we are going to make some photos of these beautiful ladies. The Morning Droop Mystery Solved: 💧 You'll notice the leaves in the photos are a bit droopy/downcast. Don't worry, this isn't stress or a deficiency—it's just a routine event: 1. Night-Time 🌕 Application: I hit them for the first time with their foliar spray (PPM) right before lights out yesterday. Foliar feeds must be applied in the dark to prevent light burn. 2. Lights-On shock⚡️ : The pictures were snapped right after the tent lights came on. After a long night, and with the spray still on the leaves, it takes them a little while to "wake up" and lift their “solar panels” back up. They'll be fully standing and stretching within the hour! A Quick Note on Size vs. Time: Some people might look at Week 3 and expect bigger plants, but here’s a tip for anyone running an organic system: Don't panic about size in the early stages! In Living Soil, the plant spends these first few weeks building a massive, resilient root system and linking up with the soil’s microbial life.** 🐛 QUICK UPDATE WITH PHOTOS FROM MID OF WEEK 3- 27.11.2025: Tonight the plants look very strong, so the first training session took place. The girls were topped and bent for the first time. I hope both of my toppings were successful and I don’t stressed my ladies too much to stop them. Fingers crossed for week 4. 🤲🏻🤲🏻🐛
Likes
13
Share
@GeOMaTTiC
Follow
Diary Legend: 💧- Watered 🌱- Seedling 🥦- Vegging 🌷- Flowering 🌲- Cut Down 🍃- Defoliation ✂️- Topping or FIM'ING 🚂- Training (LST) 💩- Fertilized 🆕🏠 - New Home (transplant) Wk6 11/21/21: Day 36. Plant is looking mighty fine, definitely one great strain to grow. Someday I'd like to see her natural shape, as I could see it being one nice bushy baby. I still need to perform some defoliation and cutting of branches, but it's alright for now. I will defoliate in a day or two, and then follow up with the cuttings a little while after. I still haven't decided if I'm going to clone the cuttings or not. I am lazy enough that I don't want to, but I'm frugal enough to not want to waste good buds. I probably will clone them. If I have room to stuff them in the flower tent, I will. If not, I'll have to grow them out a bit, and then flower them when I can. 11/22/21: Day 37. ✂️🍃 Defoliated and cut some branches, the 6 that were big enough were dipped in rooting gel, and placed in rooting cubes. Now resting inside the humidity dome. Once rooted and transplanted, allow a bit of time to veg, and then move over into the flower tent. If there is no room, see if Crit wants some, and Josh as well. Plant definitely needs watering, which I will administer later on this evening. 11/23/21: Day 38. 💧Love the way this plant explodes with growth, this bugger doesn't seem to want to stop. Hoping at least one of those clones roots, so I can see what an untouched branched will flower into. If I ever get these seeds again, I will definitely grow one out that is untouched, I'm curious to see it's natural shape. At only 6 weeks of life, this guy is already bigger than my previous photoperiods at 8 weeks old. Those yielded around 3 ounces each, so I'm expecting a lot more from this one. I will be defoliating most of the leaves on colas, hopefully forcing them to bulk up the buds. It's a technique I've been reading about, and would like to give it a shot. Gave a fair dose of water, but I don't think the entire media was saturated. That is something I find difficult with Gaia Green. Watering to a little runoff is easy, and a simple way to tell if it's completely saturated or not. Since I don't want runoff, I feel as if I'm using a lot less water than I should be. I plan on buying some Coco coir soon, and that I know I will be needing to water a lot more often, which is fine with me. I may even eventually switch over to an automated watering system. Only gravity fed, with drip emitters, that way it's on autopilot for 3 weeks at a time, minus the tweaking of leaves and branches. That would be ideal, eventually, especially with autos, then I can literally do sweet f**k all with the plants. Even if I don't get an automated watering system setup, I still want to switch over to a Coco coir and sunshine mix combo. I may even use some Coco outside with my outdoor plants, but not likely, as the sand is already very quick drying. 11/25/21: Day 40. The only issue I have with this plant, is that I don't get to grow it as big as I'd like to. It still feels like it's going to be one heavy producer though, the way it grows like crazy. We will see how it reacts to the flip into flower 9 or 10 days from now. I will continue to train some branches to keep it spread out. I really wish I was able to go back and redo this one, have it handled better from the start, and grow it out by itself. I will be defoliating in the next few days, and also removing any small shoots that cannot be trained back inwards. 11/27/21: Day 42. 💧Plant is still looking amazing. It is definitely time for another haircut, but I will leave that for tomorrow morning, so it has less time to regrow a bunch of leaves before the flip. One week left, I can't wait. I'm curious to see how much this stretches during flower. I will be tying more branches down as needed, and will now start training the new shoots inwards, to fill out any gaps.
Likes
2
Share
The lady went into the drying tent this morning. I exceeded the suggested 6-7 weeks (flowering) by 4-5 days because I wanted to wait until she reaches 20-25 % amber this time. Despite all the issues caused by my mistakes, she managed to grow healthy looking frosty buds. This pheno was definitely not the biggest producer thoguh but the smell is absolutely top notch.