Likes
Comments
Share
@Grassland
Follow
Day 1 of week 9 in flower. I took some close up pictures of trichomes yesterday they are at the end of week 12. Judging the looks of the trichomes I can go longer before flush/ harvest. The buds are slowly adding weight. The plant smells great I am happy with the progress. I will be lowering my center light down to 15cm for the last 10 day push. Early in veg the plant has a Indica look to it and its leaves. Late in flower the leaves look more Sativa. Friday May 14th I will check trichomes tomorrow which is the end of week 9 in flower. End of week 9 trichomes are getting there. One more week will be 10 weeks in flower the estimated flowering time. Video for comparison tomorrow first day of week 10. Buds are defiantly gaining size as branches bend from their weight.
Likes
13
Share
This week marks the end for this beautiful Blueberry what an amazing journey! The buds turned out dense, frosty, and full of deep purple and blue shades, covered in a crazy amount of trichomes that glisten under the light. Most of the trichomes are now milky with around 10–15% amber, just perfect for a balanced and smooth high. The aroma is absolutely delicious strong blueberry sweetness mixed with creamy and earthy tones, getting more intense every single day. During the last week I gave only plain water for the final flush, and the plant faded nicely with beautiful yellow and purple contrasts on the leaves. The structure stayed compact with heavy colas and almost no fluff, showing excellent density for an auto. Harvested at the peak moment for both potency and flavor. Can’t wait to taste it after the dry and cure it’s definitely one of my most beautiful and aromatic plants so far! Made bubble hash from Blueberry trims. Final yield: 6.5 g recovered from the 72 µm and 25 µm bags combined. Steps (what I did): 1. Collected trims gathered all the trimmed material from the Blueberry plants and prepared it for processing. 2. Prepared frozen material chilled/froze the trims so they were ready for the wash. 3. Agitated in ice water agitated the frozen trims in ice water to separate the resin from the plant material. 4. Filtered through bubble bags ran the wash through a set of bubble bags, including the 72 µm and 25 µm bags, to separate the different grades. 5. Recovered resin collected the resin that accumulated in the 72 µm and 25 µm bags. 6. Pressed & dried pressed the collected resin into a ball and dried/allowed it to cure until stable. 7. Weighed final product after drying/curing, weighed the final product: 6.5 g total from the 72 µm + 25 µm fractions. Notes / Observations: • The final texture was [insert your texture e.g., sticky, sandy, crumbly] and the colour was [insert colour e.g., light blond / amber / dark]. • Yield came only from the 72 µm and 25 µm bags; other bag fractions produced negligible amounts this run. Harvested the Blueberry at perfect maturity cloudy trichomes, strong berry terpene profile and very dense flowers. Drying was slow and controlled, keeping the room at 60% RH / ~18°C for optimal preservation of cannabinoids and volatiles. After trimming the buds, I collected all the sugar leaves and small popcorn buds to run a full bubble hash wash using my 5-bag set (220 / 160 / 120 / 73 / 25 μm). I followed a cold wash method using ice + reverse osmosis water, keeping everything near 0–2°C. Gentle agitation only — no beating the material. Yields: • 72–73 μm: main grade — golden, oily, perfect melt • 25 μm: clean sandy resin, great for rosin pressing Total hash yield from this plant: 7 grams. The 73 μm fraction was pressed by hand into a sticky, elastic temple ball and has been curing at 16°C / 55% RH for slow maturation. The smoke from the flowers is incredibly smooth, with a classic Blueberry profile — sweet, creamy, slightly earthy with a berry exhale. Very relaxing and euphoric high, ideal for evening use. Overall, one of my most enjoyable runs so far.
Likes
23
Share
Only water and no water for the last 5-6 days. Also no light in the last 24 hours.
Likes
6
Share
This variety is extremely productive with an incredible flower / leaf ratio despite its large size. I collected the first plant of this variety two days ago so I will update the data on the final weight, the taste and the effect during the Christmas period, meanwhile I wish you a Merry Christmas and happy holidays with a video dedicated to male growers 😋 obviously many wishes for a Merry Christmas and happy holidays, but without videos, to all the female growers! 😘 Data updated on January 9, 2020
Likes
20
Share
NORTHERN THUNDERFUCK AUTO / RQS WEEK #12 OVERALL WEEK # 7 FLOWER This week she's looking good her buds are frosty and they continue to get dense her colors look vibrant she's had no issues so far!! Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! Thank you ROYAL QUEEN SEEDS!! NORTHERN THUNDERFUCK AUTO/ RQS
Likes
2
Share
Plants as of august 11th
Likes
12
Share
@Terpyboyz
Follow
Alright growers 🙏🏻 So this is the start of week 2 of flowering these girls - all I can say is this time around has been a nightmare of problems right and left ha. I’m now struggling to keep temps down and RH down, I got a small dehumidifier in there 1.7litres to help out. But these girls are starting to take shape now I done a slight defoliation on the lowers to help air circulation. All is looking well and hopefully get to see some progress soon. I’ve not really taken much care or notice of the clones it took of the - Buddha blue cheese Exodus cheese Got these to stickers mixed up - rs11 & platchata (in-house genetics) So I’ve potted them into small pots Few of the auto strains I had I got rid of a couple of them as they were slow growth properly due to stress’s. A couple of them are still going okay but definitely not dense buds at all mostly airy so not a fan at growing these compared to photoperiods. Happy growing guys 👌🏻✌️🏻🍁
Likes
19
Share
@Chi_K24
Follow
Alright folks always are now on day 18 and we are looking good. I did notice the plants needed water pretty badly. Hope I didnt stunt them. (Better than over watering imo) They did perk up once I watered them. They blew up since the last update and it was time to LST. Water the ladies today with aprox 8 cups of de-chlorinated water each, pH to 6.5. Moved the lights a little closer and added a new humidifier due to a break down with the old unit.
Likes
90
Share
@MrCOCO
Follow
Hi everyone 🍃🍃🍃The girls do very well ...🍃🍃🍃 Pinching turned out to be a hit because everything looks nice and I enjoy my eyes when I look at them ...🍃🍃🍃 Happy growing 🍃🍃🍃
Likes
41
Share
Flowering day 30 since time change to 12 / 12 h Hey guys :-) Every day when I look into the tent, the sight and the smell are a dream 💚. They are all developing very well. There is no tip of the leaf that looks funny at the bottom or at the top 😃. They were watered every 2 days with 1.3 l each (nutrients see table above). They were all checked and checked for their health. Stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
16
Share
@Mopish
Follow
27 Dec - 2 Jan 27 Dec Started flushing due to nutrient burn at 26 Dec 22:00 - Finished Flushing on 28 Dec 06:00 2ml/l Flawless Finish 1ml/l Sensizym 400PPM 28 Dec Lowered feed due to nutrient burn. Aiming at 900ppm 29 Dec I don't see any new damage, but I'm keeping an eye on them. 31 Dec I saw a few leaves with probable calcium def, so I added 0.8ml/l of Sensi bloom part A 0.8ml/l of Sensi bloom Part B
Likes
4
Share
Likes
10
Share
seedling capsule stuck a bit so i "carefully" remove it to free the cotyledons
Likes
50
Share
Week 6 Veg Report – Runtz We Meet Again! Another week, another step forward in our Eternity Grow Cup 2025 journey, and oh boy, do we have a lot to unpack! These Runtz girls are showing their potential, and we’re dialing in every little detail to ensure they thrive. Let’s dive deep into everything that happened this week! Cal-Mag Deficiency Adjustment – Pheno #5’s Special Needs This week started with a close inspection of our phenos, and we noticed that Pheno #5 was showing early signs of a calcium/magnesium deficiency. Whether it was slightly off VPD levels or this particular plant being more demanding, we decided to correct it by increasing the dose of RO Water Conditioner. Now, while this isn’t a direct substitute for Cal-Mag, it does contain trace amounts that can help stabilize the situation. 🔬 Understanding Cal-Mag Deficiency: Calcium and magnesium are essential secondary nutrients. Calcium strengthens cell walls, preventing issues like tip burn and weak stems, while magnesium plays a critical role in chlorophyll production, allowing plants to efficiently absorb light energy. 💡 Signs of Deficiency: • Yellowing between veins (Magnesium) • Rust spots on leaves (Calcium) • Slow growth and weak stems ⚡ How We Address It: • Slightly increasing RO Water Conditioner to see if trace minerals help • Keeping an eye on overall nutrient uptake to ensure no lockout • Monitoring VPD (Vapor Pressure Deficit) closely to optimize nutrient absorption Let’s see how she reacts next week! Branching Development – Pheno #2 Leading the Race All five phenos are thriving, but Pheno #2 is showing the most aggressive branching, pushing outward faster than her sisters. However, overall, we’re seeing very uniform growth, which speaks volumes about the stability of these genetics. 🌱 What is Branching & Why It Matters? Branching is the plant’s way of expanding its canopy, increasing surface area for photosynthesis, and maximizing potential bud sites. Well-structured branches allow better airflow, light penetration, and more even growth—key for a successful high-yield harvest. ⚖️ Topping vs. Leaf Bending – The Training Choice Instead of topping, I’ve decided to go with leaf bending for now. This method allows for gentle manipulation of the plant’s growth without causing major stress. Once we introduce the SCROG (Screen of Green) net, this training will help maximize the canopy spread. Moving to the TrolMaster Ecosystem – A Game Changer Big move this week—our Runtz girls officially transitioned into the TrolMaster Ecosystem, and let me tell you, they are absolutely loving it! Under the ThinkGrow Model 1 LEDs, they’re thriving, leaves praying upward, soaking in that optimized spectrum. 💡 ThinkGrow Model 1 LEDs – Why They Work • PPFD of ~400 µmol/m²/s at their level, running only on Channel One • Full-spectrum lighting tailored for optimal vegetative growth • Passive cooling design, keeping temps stable while saving energy Environmental Conditions (Measured on the TrolMaster Tent-X and the AMP-3) • Temp Max: 26.6°C | Min: 16.2°C • RH Max: 77% | Min: 52% • VPD Max: 1.65 kPa | Min: 0.43 kPa • Solution pH: 5.8 • EC: 0.96 • Water Temp: 16.3°C Why These Numbers Matter: • Keeping VPD in check ensures efficient nutrient uptake • pH and EC levels fine-tuned for maximum root absorption • Water temp stable to avoid root shock and slow growth Autopot System Prep – Getting Ready for the Next Phase The week wraps up with us cleaning and preparing the Autopots for their next phase. These self-watering systems will allow the Runtz girls to access water and nutrients at their own pace, optimizing growth as we head into pre-flower soon! A huge THANK YOU to Zamnesia, Plagron, and GrowDiaries for making this incredible Eternity Grow Cup 2025 possible! Also, a big shoutout to my main sponsors, thank you for keeping this journey running: 🔥 Aptus Holland – Precision nutrients for peak plant health ⚡ TrolMaster – Bringing automation and accuracy to the grow 🌱 Pro-Mix – The foundation of strong roots and healthy plants 💨 The CannaKan – Premium solutions for top-tier results Grove Bags – Revolutionizing post-harvest storage & terpene preservation 📜 Ziggi Papers – The ultimate rolling experience And of course, a massive thank you to the community—followers, supporters, lovers, and even the haters. You ALL fuel this journey, and I appreciate every single one of you! 🚀 Good luck to all fellow competitors—watching everyone’s grows is inspiring, and the competition is fierce! 📢 Join the journey on YouTube & Instagram for exclusive content, behind-the-scenes action, and more insights into this epic run! 👊 Let’s keep pushing, learning, and making history—see you all next week for another deep dive into the Runtz We Meet Again grow! 🌿🔥 💚 growers love to all 💚 Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol MAster https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags
Processing
Likes
6
Share
@NastyNug
Follow
Start of Week 3. Increased light to 75% (750w).
Likes
3
Share