Another great week. She producing trichs and growing great.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Start of week 5/6

We are officially in full bloom. The have been enjoying 6-7 hours of sun light per day for about 4 days now, then brought back in under the cobs. The girls are all exploding with growth and stacking what I expect to be huge buds.

Day 5 since time change to 12/12. Hey everyone ☺️. Finally the time has come :-) The lady moved into the flower tent on January 6th, 2021 😁. The day before, of course, a cutting was taken 👍. In the flowering tent, the distance between the plant and the lamp is 40 cm so that she can get used to the strength of the lamp. After 3-5 days I go down to 30 cm. This week it was watered twice with 1 l per plant. GHSC enhancers were added to one wash :-). Flower fertilizer will only be added in 12-16 days as soon as the first blossoms are there :-). Otherwise the tent was completely cleaned and the humidifier refilled. For the next few days I have filled fresh osmosis water in canisters again :-). Next week I will remove the bottom shoots so that the energy doesn't end up going into small popcorn buds 😉. There is nothing more to report this week and I wish you all a lot of fun with the update 😀. Stay healthy and let it grow 🙏🏻🍀 You can buy this Strain at : www.Zamnesia.com Type: Banana ☝️🏼 Genetics: OG Kush x unkown 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

This week I noticed the buds got more bigger but also the calcium deficiency has gotten worse and so to battle that I added gypsum to the medium and gave them two waterings with banana peels 🍌in the water ( I read banana peels give off Potassium, Phosphorus, Calcium, and magnesium) hopefully they bounce back and my yield isn’t affected too bad.

The purple kush has been behind all the plants the whole time. When you look at the plant you will notice a lot of the leaves are burnt. 10 days ago or so I think I accidentally gave them to much nutrients or I didn’t shake the bottle I used. The purple kush is starting to bulk up some I’m thinking it will be a decent little plant when all is done.

I will b running the SHERBCAKE again to dial her in properly took a lot clones of her so I can’t wait to run her again terps of her is dessert and fuely 🍰⛽️ seeds made by k1 kreationz

🇩🇪 Ich war dann doch neugierig und hab mich dazu entschieden nach einer Woche einen Teil der restlichen Erde und den Rand vom Airpot zu entfernen um mal zu schauen wie sich die Wurzeln in dem Bereich machen. Und tatsächlich mehr oder wenige wie geplant und am Ende durch das verrutschen der Pflanzen oberhalb der Erde auch wie erwartet nicht ganz perfekt aber dennoch bin ich für den ersten Versuch sehr zufrieden. Auch wenn die Wurzel nicht von Fingerspitze zu Fingerspitze geht und sich der Stamm nicht mehr zur Seite sonder mehr nach oben verwachsen hat. Ist sie trotzdem sehr gelungen. Und kann sich die nächste Zeit erstmal wieder erholen und wird nur hier und da in Form gehalten. Happy growing💛✌️ 🇬🇧 I got curious and decided after a week to remove some of the remaining soil and the edge of the Airpot to see how the roots were doing in that area. And indeed, more or less as planned, and in the end, due to the plants shifting above the soil, it wasn't quite perfect, as expected, but I'm still very happy with it for the first attempt. Even though the root doesn't stretch from fingertip to fingertip and the stem has grown upwards instead of sideways, she still turned out very well and can now recover for a while and will only need occasional trimming. Happy growing! 💛✌️

Fastbuds Meme Video Contest

Skywalker rounding the corner. Harvested 8/7 @ Day 76 from sprout Blueberry bulking up. Glueberry og done stretching and bulking up now

A sad week, I found bud rot and had to take my plants out and do a big check and remove all dense underdeveloped growth. It will be a pretty big hit on the yield I guess but the most important thing is learning and that I did. The bud rot could spread due to my RH being 65/70 at nights and it used to be +80 before, + bad airflow. I got new fans in the tent and my dehumidifier was ordered already but its not in yet. On the other side, the plants are looking pretty damn good, they smell amazing and 3 of the 4 plants is getting a very dense nug structure.

What a fun run this was ! These Ogreberrys finished up from 81 days to 102 days with nice hints of gassy , sour purple , sweetness and glistening with frost! These ladies will cure up for a month an will be ready to test out ! So much fun , I highly recommend this strain if your looking for some oooy gooohy resiny grape smelling nugs !

9/11 Week 22 Looking better seem to have closed the Phos hole in my nuets, in the future pots will be amended with it from the start. 9/13 Weather degrading (heh relative term) plan to harvest Poly on next spat of "good" weather, Zona couple of weeks tops. Poly water only but there is plenty of nuets in that pot. 9/14 No decent sun today at all, high humidity forecast is saying it just gets worse from here (heh like those guys know) but if true I need to harvest poly ahead of it which may mean tomorrow. Decide then see if forecasts change. Next year things will be different damit 9/15 Day 146 of the grow and Poly's last day Weather is entirely the reason for taking her a bit early, wanted to prep her a bit more but thats life in the outdoors. She has a beautiful day for her last, she was never any trouble and grew well, I am glad to have grown her, she is a good girl. Pics and vid to follow, Zona will go as long as we are able as she will hopefully get better weather in a few days after the coming mess departs.

Welcome to the Sweet Seeds Cup 🏆 Hi everyone 👋 This week she continued to develop really well 😍. From this week on she will receive 3 ml of Canna Bio Flores. She starts to put the whole production into the buds :-) Next week she gets 4 ml per L :-) Otherwise there is not much to report this week :-). I wish you all a nice start into the new week, stay healthy 🙏🏻 and let it grow 🌱👍 The variety San Fernando Lemon Kush is available here at Sweet Seeds 🌱 https://sweetseeds.es/de/# ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼👍 Sweet Seeds Cup 🏆 Type: San Fernando Lemon Kush ☝️🏼 Genetics: OG Kush x Kosher Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧