Recommended
Likes
Comments
Share
***Note that I started to count the days when I placed the seeds between paper towels. The seeds were planted 3 days later and sprouted from the ground 2 days after being planted. D80 (13/05/2021): I'm looking at the trichomes every other days. Glue Gelato is starting to show amber on top buds. No amber for Banana Kush and Gelato. This time I will chop them all at the same time so the one I will rely on is the Glue Gelato. As soon as she is ready, I will harvest them all. Banana Kush and Gelato would probably need more, but in term of logistic, I need to harvest all my plants at the same time. D83 (16/05/2021): Not ready yet. I'm checking trichomes closely! 😬 - Light: the lights are at 100% and at 12 inch form the plants. - Temperature: during the day: 24-25C ; during the night: 20C. - Humidity: the humidity is maintain around 46-48% all the time. - Air circulation: There is an oscillating fan on the ground, one fixed fan pointing on top of the canopy and one fixed fan to help cool the lights. - Water: I gave water every other day or when the ground feel dry or the pots feels light. - ***IPM: I never mention it but I'm using nematodes pouch as an integrated pest management. I had trouble with pest in my first grow and I learned from it. That's the only thing I do for pest and of course watching closely and regularly at my plants 😊
Likes
12
Share
She’s getting a little bigger day by day! Popped when it was pretty cold outside, but it’s has been very hot and humid this past week—- and she loves it!
Likes
295
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Plant double size in 1 week, and buds coming along 🦔🦔 Drink more and more water and look never enough 😅 💡 I up a bit the supply of lamp each days, now 50%, don't up much. 💪 I continued a bit the training, Removed some leaves. 💧 Give water each 2/3 day 1.25 l Water + Roots + Ez 1.5 l Water + Roots + Bloom + Sugar Royal 1.5 l Water + Roots + Bloom PH @6 RQS - Easy Bloom Booster Tabs 1 tabs/5 l RQS - Easy Grow Booster Tabs 1 tabs/5 l RQS - Easy Micronutrients Plus 1 tabs/5 l (1 watering each 10 days.) 💡Mars Hydro - FC 3000 50% 49 cm. Mars Hydro Fan kit Setting 6 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller RQS - Titan F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/624-titan-f1.html
Likes
7
Share
Flower day 49. Stinkier and stinkier and stinkier and stinkier and stinkier and stinkier. Buds get bigger everyday. Left plant is starting to turn purple. Trichomes are insane. Really getting exciting.
Likes
8
Share
@Campesino
Follow
Well, Surprised by the size at the second week. As my second time growing in indoor, the first time I try with 5.5lt smart (fabric) pots with BioBizz Tripack. At the harvest, only the Torpedo was the biggest (the other was Mamba Negra, Stress Killer) size of crops (2,5 cm diameter). The smell is quite light, as fresh lemon or ment. The leaf are more light than the first Week. The torpedo is growing up more, same at the first time I grow it (Sorry for my english, I can't specific more details),
Likes
22
Share
@Leeyum
Follow
Day 63 and she's a stank monster. I can't even describe her but it's got a fruity undertone to it. I think she'll come down in 3 daysish .
Likes
7
Share
@cadur
Follow
The plant just seems to be sick. As last week the leaves are mutated and nothing like my previous grows. Growth is slow too, all in it's a bit of a runt. Purple is coming though and it is certainly interesting and LST is easy as the internodal spacing is good. Very low hopes for this grow but still early doors. I looked at other grows on here and a couple showed up as sickly like this one.
Likes
5
Share
@MG2009
Follow
04/11/2021 All going well
Likes
19
Share
Hi all, I chopped some leafs, watered with plain water. Lamp lowered by 5cm. That's all for today. Njoy weekend.
Likes
43
Share
@Coopmc
Follow
Amazing!! Ya buddie!
Likes
2
Share
Finally starting to see some roots underneath and some decent growth up top. I’ll update again after changing out the reservoirs to see if that helps with some of what I think is a nitrogen toxicity.
Likes
12
Share
Wow 😲 I was thinking this was going to be a total runt. As if turns out I am starting to think of it as having a lowryder auto. I know I know 🤣 it's not a lowryder. She's actually a Northern light crossed with Big Bud Auto from Seedsman. This little lady was barley 3 weeks old when I noticed her transitioning to flower. I was about to pull the plug and decided otherwise. I mean what could it hurt to grow her out. Anyway she's more than doubled in size and her bud sites are well formed, stacked up and just looking good. Question? Would it be better to turn my 250 true watt down and move the light closer?,or run it full power and set it higher ?
Likes
Comments
Share
Last week of pre flower girls are doing great can’t believe they’re clones
Likes
38
Share
Utopia Haze is a rare heavily sativa dominant hybrid (90% sativa/10% indica) strain created through back crossing Brazilian Sativa strains. This tasty little bud took home 1st Place for Best Sativa in the 2008 High Times’ Cannabis Cup and for good reason – with its potent 18-22% average THC level and long lasting cerebral effects, Utopia Haze is one powerhouse smoke. The Utopia Haze high comes on soon after you finish your first toke, hitting you with a strong cerebral lift that infuses you with a sense of hazy relaxation. Type: Feminised/Photoperiod Cultivation: Indoor/Outdoor Flowering Time (days): 70-75 Indoor Yield (g): Up to 650 Feminised Outdoor Harvest Month: October Feminised Outdoor Harvest Month Week: 3rd-4th week Aroma: Citrus, Woody, Pungent, Mint Effect: Cerebral Lift, Hazy Relaxation, Sleepy Welcome Everyone to the Final Entry of my Utopia Haze Grow ! There is so much to discuss ! I have been extremely busy as of late trying to get this Harvest together, but i am happy to have it here for you now ! I Seriously under estimated the amount of time, help from others, and my own necessary skills to pull this off.. and i still kind of screwed it up lol ! But its worth noting i have never actually done this before and trying to document it during....was extremely hard. It is next to impossible to work an iPhone with rubber gloves on ! First I want to discuss everything step by step so before you jump straight into the comments on how the end product is so small in "quantity" Rest assured i am happy with its"quality"...and thats all that matters to me because Life is a journey not a destination! and i have learned so much from this grow that I couldn't be any happy even if i messed some things up :) But at the very least I hope you read through this entry in its entirety with an open mind and focus more on the process, rather than just the outcome! I ran out of Ice & i was only able to wash three times..(normally I've heard you should go sometimes 5-6 washes) Preparation is Key & things will be much better next round :) Photos 1-22 These are pretty self explanatory but for those of you just tuning in now.. this is what happens to a very happy plant when you don't have the necessary tools to monitor key components of growing cannabis.. Ph, as well as EC levels play a very key role in the outcome of your grow lol that being said I was just able to save this plant by purchasing both tools but that doesn't mean the plant didn't suffer because of the prior events.. This was a Huge reason behind me choosing to turn this harvest into what i would consider "Solventless Hash Rosin" from "Ice water extracted Bubble hash". Pictures 23 The idea here is the process of using "fresh Frozen Cannabis" this has been discussed many a time online on such sites as instagram and here on grow diaries as well.. I personally have Never tried the process so i decided to try it out and make a judgement for myself.. Video 24 The Cannabis has now been in the freezer for 72 hours making it very well frozen.. as you can tell i struggled getting it all into the 25u Screen Wash Bag. One thing of note i would do differently is i will de-stem my next batch as i also believe this played a part in the amount of plant matter that escaped through the sieves. Photo/Video's 25-28 The idea here is "ice water Seiving" & especially with the bags that I am using here that are only have screen material on the bottom portion of the bag it is very important to have spaces in-between the screens to allow the water to pass directly through the screens into the bottom bucket with the least amount of resistance.. because the hash is so extremely temperature dependant if it gets warm on the side of the bag.. it will stick there and not make it to the bottom to become use able product.. 29 You do not need to use as much Ice as i used here lol... the idea is to keep everything very cold..i certainly achieved that but at the sacrifice of using so much that i ended up grinding product and producing "contaminants" but in the end they are just plant matter that i would be smoking when i rolled up my joint either way so.. I'm not super disappointed.. But it should be noted that what you want to achieve here is a Layering effect where you have the wash bag between two small layers of ice while the "water current" washes the Trichomes away allowing them to be separated by the screens setup below :) Before Starting the machine you should allow some time (i.e.;10-12minutes pre soak to allow the product to become saturated) before the first cycle. By video 32 I have just ran out of ice lol.. Video 33-34 Here I have a tip for you.. to separate the screens that you sieve through.. cut 5 gallon buckets to stretch them across nice and tight.. it'll make scooping your Bubble that much easier ! i learned this from the many "Frenchy" videos I have watched :) Picture 35 Here in lays the problem for most people.. drying your hash without loosing vast amounts of "Terpenes" whilst also stay ever vigilant against mold ! Thanks to all those videos I've watched on youtube.. id like to think this was one of my most successful parts of this process.. Things to Note; Terpenes start to seriously evaporate at temperatures 68F or 20C you need to stay as cold as possible whilst bringing the Relative Humidity in the space down into the 40-30% to stay away from that nasty mold ! I used my cold storage room in the basement.. with a dehumidifier running to keep the space at 45% RH & staying at a constant 15c. All while spreading the hash as thin as possible across parchment paper, on top of the white screens with a fan moving air across both sides of the paper. Pictures 36-38 These are some macros i took in the middle of my drying session I fell in love with the colour. Yes i know the black spots are plant material but they will get caught when i bag the hash & squish the oil out. Thing to Note; at this stage it is important to ensure you 'micro plane" the hash down as fine as you can whilst staying weary of the temperature... any "chunks" will hold pockets of moisture.. that lead to potential problems..ie; mold ... Picture/Video 39-41 Successfully planed bubble hash ready to be bagged and Squished ! Picture 42 Ive decided to follow Pedro.. from Pedros Grow Room and double bag to be on the safe side so i don't have any blow outs. So thats One 25u bag inside one 160u bag ! :) Pictures 43 This is almost 3 grams of the bubble hash from above, already melting in the bag.. this is where i ran into trouble again lol things started getting to warm in the house and i was only able to get one of the three squish's i did on video :( things started getting sticky. Picture 44 This is basically just a photo of the equipment I'm using; 3x5 LowTemp Cage in the frame I built myself, with a 20Ton bottle jack. Something to note here is this is an older Lowtemp model with only a single heating zone which is which i have it closed here heating Both sides of the press :) As well as the importance of having adequate pressure on your plates.. my rig is very overkill for the size of hash bags..lol Video 45 Here is the lovely press video.. its didn't quite work the way i wanted either lol my directional folding wasn't quite tight enough for a big "drip" :) &the Press was set to 65°c Photo's 46-50 are pretty self explanatory :) I had a blow out.. but still managed to pull an 80% return from the hash once squished...& yes it tasted amazing :) Was it worth it in the end... that could be debated.. for some..i understand..its not your thing, but for those of us that are interested in making our own concentrates.. free from Solvents... I wouldn't make it any other way :) If even ONE of you reading this diary finds it helpful to reference for ANYTHING.....even if its "what not to do" ill consider it a success ! Thanks again for tagging along on this garden adventure.. its been one heck of a journey ! Much Love from B.C. Canada, Until Next time, Cariboo
Likes
8
Share
@dauntless
Follow
10/15 Same stuff, just keeping it stable is all I'm trying to do. Update 10/18 - Heat was ridiculous this week, had to turn one or more light features off, for example, turned off the HPS -AND- the LED circuit on the Phlizon on the hottest day because inside the tent it was like 91 degrees F. Yeah it may not be the perfect environment, but look at the growth from the 15th til today. Major flowering happening, unless I am tripping. I see a lot more healthy growth now, which in my opinion means the transplant idea was SO WORTH IT. I see a lot of crystals forming now and the tops the leaves are turning more white that I could hav imagined -- with two more weeks at least to go, I think I may have some bomb flowers if I dont fuck anything up. Northern light to the left in video has more to go and is not as far along as the Vanilla Frosting. 10/20 Added some new nutes for the last two weeks of flower, bubbling like a madman wanting this grow to finish. White Widow (three plants outdoors) will probably finish in the tent, its just really in stasis but it is getting some frosting of its own. BTW when I smelled the flowers yesterday I was blown away by how awesome they smell, like seriously boutique top shelf aromas going on, this is my first grow indoors and really the first time I have been able to give the attention and care these babies need. I have learned SO much. Especially about stuff I was clueless about before. Like which lights are good. What tent size to get. Ph, nutes, watering, relative humidity, cloning... all new stuff. I have become a better gardener as a result and my 200 sq ft community garden plot is doing way better and I expect next year to be bonkers because I really get the whole ecosystem thing now and how mycorrhizae helps everything. This video helped me a ton: https://www.youtube.com/watch?v=ID9rE5JewVg&ab_channel=ApogeeInstrumentsInc. and this one too: https://www.youtube.com/watch?v=jq_wl8XRUK4&ab_channel=GrowersNetwork Also, really check out Phlizon lights (CREE COB) if your tent can handle the heat. I am already planning my next grow, and I am going high CDB autos... solomatic and fast eddy.
Likes
6
Share
I'm wanting to replace all my miscellaneous lights with another quantum bar rig before my Fall grow this year. Anybody want to buy some gently used lighting gear this summer???😁😎 👉 2 x 100w Cree CXB3590 (3500k) with pin heatsinks - 3 grows usage 👉 1 x 100w Citizen Clu048 COB (3500k) with pin heatsink - 3 grows usage 👉 1 x 120w DIY quantum board (3000k) 256 x LM301b's - no heatsink - used for 2 grows 👉 1 x 60w Bridgelux COB (3500k) - Par38 style - used for 1 day (a back-up bulb) 👉 1 x Morsen 2000w (367w actual) blurple with a bank of 1/6 of the 200 LEDs not working - used 3 grows 👉 1 x Morsen 2000w (367w actual) blurple with only my current grow in use (the replacement) 👉 1 x HeroLight 1500w (285w actual) 5 x COB full spectrum (pinkish-white) - 2 veg stage uses 👉 4 x 36w Par38 type deep red (660nm) bulbs - 3 grows usage 👉 2 x 25w 225 LED panels (660nm) - 3 grows usage 👉 2 x 25w 225 LED panels (440nm) 4 veg stage uses 👉 2 x 25w 225 LED panels (440nm) 👉 1 x 50w 225 LED panel (6500k+440nm) 👉 1 x 20w Par38 style Cree COB (3000k) - (more like a 40w) - used for a week 👉 1 x 15w Sansi blurple Par38 type bulb - used 1 day only 👉 1 x 40w Sansi 4000k daylight Par38 type bulb - used during germination only 👉 4 x 12w MiracleLED red spectrum (4000k daylight + 700nm red) regular light bulb - used during flowering in 2 grows Just hit me up in chat if you are interested in anything- ============================================ SUNDAY 3/31: I foliar fed her a few times and rotated her. Almost have the lighting timers adjusted well enough to keep the PAR high while keeping temperatures low enough for successful flowering. MONDAY: spun her around and foliar fed a few times TUESDAY: I fed her about 3/4 gallon and started her on Open Sesame and Tiger Bloom. Foliar fed a few times and tweaked the timers again.. WEDNESDAY: I foliar fed a few times and rotated her, then took some photos. She's looking sexy!😍 THURSDAY: I foliar fed her a few times and rotated her. FRIDAY: I watered her with about a half-gallon including boomerang, bud candy, calimagic, terpinator, kelp me kelp you, and armor si. She's the most Sativa-looking plant in either of my tents, but still currently winning the race to the finish.