12/30/2021 5 Biscotti Skunk, 5 Lemon OG, 4 Grape Skunk. Starting veg at 18 hours for 4 or 5 weeks of veg and into flowering. Will reppot this week into 6" pots then into 3 gallon pots. One maybe going to 20 gallon fabric pot, if I got an extra one but I'll see 🙏🏻 Potted up to 6" pots 1,Biscotti Skunk 1,Grape Skunk 1,Biscotti Skunk Hoping to start a staggerd grow where I can trim only 3 plants a week. Into pots I added 1 tsp per 6" pot of Coast of Maine stonington plant food 5-2-4 added to happy frogs .30-.30-.05 NPK they should fill out quickly in time for reppot in 2-3 weeks.

😁🍀👨‍🌾🏻👍✌️💚

Gorilla Jealousy F1 is starting her first week. She stretched a bit, but I don't think it is anything to worry about. She is looking really good, and she should find the solution over the next week. She will be moved into my photoperiod room once I get it cleaned, and set back up. Thank you Seedsman,and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

So far so good, Can anyone out there please advise if these are ready now or a few more days... Tis getting warmer now where I am. How hot is too hot for plants? Thanks in advance..

Week 8: Everything is going great. I didn't plan on taking them all out again till they got chopped, but decided to get them out one at a time today and give them a good thorough defoliation, peeled off any undergrowth and water and feed them all. Temps remain completely under control and no longer an issue, even in 90 degree weather here. I've continued to alternate between feeding and just water, cal mag and fish shit. The only plant of the 6 to show any deficiencies was the #1 Skunk. Every leaf on leaf chart looks same to me lol. I upped today's feeding to 3/4 strength instead of half strength. If I had to guess, I would say that this is the last feeding for the Creme de la Chem, Strawberry Couch and the Double Grape. Those three will likely all fall in the 70-80 day harvest range and those three are at day 58. Not 100% on the #1 Skunk or not, it may get one more feeding, along with the Watermelon Skittles. The Fruit Punch? Well there is a chance I will be smoking cured Creme de la Chem before that one gets chopped lol. It will continue to get fed for a while as buds still very under developed. Today's defoliation was barely anything for a couple plants like the Watermelon Zkittles. A few big fan leaves blocked bud sites, but the Skunk needed thinned out badly and I took a good 20 minutes to go around the outside them come in from over top to really get in there and try to make some airflow and better light penetration. These are definitely drinking at different rates but in order to not be mixing up stuff daily, I feed them all on the same day and the couple that still had some weight to them just get less. I think these will all meet and exceed my 2 ounce goal per plant and 5 of the 6 after topping and training have conformed to the types of plants I really want to grow with the space I have. Thats 6-8 tops on a short compact plant. The Fruit Punch went off the reservations waiting till day 50 to start flower and is acting like this is a 3 plant grow not a 6. But shoving it in corner and putting short Skunk plant by it on bucket to raise up canopy along with raising one side of my TSL2000 and lowering other side towards shorter plants appears to be working great. Its great to be thinking about the flush. Having plants out, I did check trichomes on a couple just for the fun of it and mainly clear so got couple weeks or more for most of these.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

End of week 6, buds are tightening up nice! I'm not sure when to start flushing or time the harvest because all three plants seem to be maturing at different speeds. Still watering with full nutrients, PPM about 1000 ... Taken the nitrogen down and increased PK. Let me know what you guys think.

[2026 March 4 | Day 84] - 8 Weeks of flower completed so far, and she's looking really nice. A bit shaggy, but nice nonetheless. Still not much smell other than a mild overripe fruit odour, but with temps being kept at 71F or lower I'm not too surprised. Pistil hairs are now half Amber, and trichomes are just starting to cloud up here and there on the buds, but they're still mostly clear. Time-wise I've tentatively set somewhere between the 20th and 25th of March as the optimal harvest window, but it will of course depend on the trichomes and how fast they mature. The soil she is in needs to be flushed of excess nutrients (salts), so I plan to taper her feeding this week with water containing only bud candy, as well as gradually reducing light intensity little by little from now until harvest. I'll reassess in another week, but things are looking really good at this point.

It’s another week of drooling here damn these are some juicy looking veggies, already dreaming of smoking them!🤤🤤 I feel it’s starting to get to the end of the line for 2 of my OG’s, will feed m 2 more times before I start the flush. Plan to have m around for at least 2 more weeks hope that’s enough to clean m out. Got another OG with a crazy amount of leaf growth. Don’t know what to think of it but it has a great color and will def need a lot more time to develop buds, same package of seeds, same strain, same veg treatment complete different plant 🤨 1 gorilla (top middle) had the filter dropped on him and lost the main cola, the rest of the buds seem okay but the little twigs on this plant are way to skinny to keep m up right. The gorilla in the top right corner got too close to the sun, I really thought it was a herma or something but I guess it’s just deformed during a week of extreme temperatures. If ya think I should just chop it off leave me a comment 👍🏼 Sooo really dont know if anybody is still reading but I’m gonna split this diary up in 2, I love this site and it would be better to document per strain for my own archive. And the contests only admit 1 strain per diary hehe 😏

This plant plus one more started to wilt earlier on in the week, I figured it was probably time to transplant seeing as they had been in the solo cups for 2 weeks. After transplant plants seemed to be happy again. I introduced amino acids this week as well. They are getting the grease spray and drench program

Went into 48 hours or darkness on day 66, then chop...14-21 day 60/60 dry ahead. Will report on harvest and smokes in a few weeks. Another great scrog under the belt!

Ok

WEEK 2 - 31/7/2021 - 6/8/2021 1/8/2021 - 1L of water mixed with the following: Cal Mag - 2.5ml/gal - 0.7ml Micro - 2.25ml/gal - 0.6ml Gro - 2.25ml/gal - 0.6ml Bloom - 0.6ml/gal - 0.2ml Rapid start - 1ml/gal - 0.3ml pH - 6.07 EC - 1.03 mS.cm T - 26 The 4 seedlings are still showing signs of growth but the leaves are droopy and has malnutrition issue. I really hope they get back on track with the new nutrient regime. 2/8/2021 - 4 seedlings transplanted to larger 3 x 3 inch rockwool cubes to allow the seedlings to establish its roots first before transplanting to the RDWC system. 6/8/2021 - 2 plants are relatively normal looking but the other 2 looks deformed. I'm quite unhappy with the seed performance thus far. Poor germination rate, inconsistent genetics and weird phenotype. I wonder where Weedseedexpress sourced the Harlequin seeds from.

Week 25 december - 31 december

Day 29: not much is going right now. Day 31: boosted with some more nutes 2,3ml per liter canna coco a&b Mars hydro SP3000 High PPFD at 2.8 umol/j, average yield at 2.5g/w, increasing your yield 50% or more compared with old blurple and HPS lights, 300 watts output. Dimmer knob added, more convenient to adjust the brightness. Up to 30 lights can be daisy-chained and control together on just one light, or just have one light in a 120x60 tent. https://www.instagram.com/marshydro_aliexpress2/