Likes
Comments
Share
Chopped the first GG plant will update after it drys and I trim it. The cheese plant that isn't LST probably has another week or so maybe less. The rest have a few weeks slowly making more room in the tent. Only giving water for the rest of the time maybe some cal-mag to help the plants that at burnt (NL, both cheese).
Likes
11
Share
@Souri93
Follow
Belle floraison avec des tache violette
Likes
47
Share
Third week of visible flowering. Growing out nice cant wait for the buds to grow fat and big. While they grow i give them a bit more nutrient every feeding so now im @ EC 1.6 Im thinking of maybe going up to an EC1.8 if anyone has any tips for this?? Thanks for reading again and untill next time
Likes
2
Share
@Kirsten
Follow
26.1.25: I have had a mistake 😕 i spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. Bubble Kush
Processing
Likes
21
Share
They are really starting to take off now.im hopeing they do get about a foot taller.not sure though.
Likes
22
Share
We loved this photoperiod Super Boof from Zamnesia right from the start. This plant has developed an excellent cannabis body that has allowed it to give us beautiful flowers, with good density, a great scent, and excellent resin production, especially considering the hot periods it experienced. Up until now, I haven't had the chance to control the temperatures with air conditioning, but I'll soon be able to do so at the new location, and everything will be even more precise. However, finding an ideal spot and making as few adjustments as possible remains the ideal solution. I love hillside locations; at most, you need to cool them a little in the summer and heat them a little in the winter, for sure. In any case, we're gearing up for full control; I'm still a home grower like everyone else. Our plant has given us good trichome maturation, mostly milky/cloudy, just as I like it, with some amber and still a bit of clear stuff. Always cultivated from start to finish with Plagron fertilizers in the 100% organic version, soil included. Leafy's Strain of the Year ---- // https://www.zamnesia.io/en/13317-zamnesia-super-boof-seeds.html Zamnesia Quick Facts // Here's your chance to grow one of the most sought-after strains of recent years: Super Boof, rightfully crowned Leafy's Strain of the Year 2024. Derived from Black Cherry Punch and Tropicana Cookies, this 70% indica-dominant hybrid takes the already exceptional traits of its predecessors to new heights. Grow it at home to find out for yourself. The whole world of growing and more is at Zamnesia - just take a look around the site and you'll find "nature's best" in all shapes and colors. New strains are awesome and old ones are no exception... -- // www.zamnesia.com
Likes
10
Share
@Thibaut
Follow
weather is insane hot ladies are loving it all started to show nice pistils with beatifull colors the bloody skunk looks redish its nice keep updating these for sure
Likes
25
Share
@KivzBudz
Follow
In the end I’m very happy how this first Grow went. Tomorrow I’m gonna finish the other half and update some pictures. Curing begins now, can’t wait to smell and taste the full cured terpens! 😋🌱
Likes
19
Share
@HeavyHead
Follow
Started some LST this week. Keeping it pretty simple did a simple runoff test and everything came in range so going to keep nutes the same, drink rate has almost doubled since last week, fully saturating pots everything 12 hours or so. Probably going to do a deep clean of tent before get heavy into flowering and I’ll add some more pictures as I go with LST.
Likes
7
Share
Well week 8 finished up nicely gonna harvest next week…the color came in nicely always do in the winter tho……I’ve done these strains multiple times there from clones so I know what to expect….
Likes
12
Share
@Daviz_42
Follow
Sin duda para los amantes del terpeno anaranjado es una clarisima ganadora, es pura mandarina, citrico, refrescante, imagino una extraccion con esta genetica tiene que ser increible.
Likes
Comments
Share
@xHide_BG
Follow
Good Strain .. it's not the best of all. but the experience is worth it. 😀I think it's a great plant to test xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxx x it's not the best of all. but the experience is worth it.
Likes
64
Share
This is a very easy plant to grow, in my case i had some problems the last 4 weeks with heat that i couldn't resolve. I have had temperatures around 34 degrees Celsius when my light has bean on and around 25 when off.
Likes
99
Share
@BudXs
Follow
Things are rocking, things are rolling Autos have another 4 weeks. Seedlings are huge and have another 3 weeks to veg. Clones will take right the fuck off once the roots reach the reservoir, should be soon All gifts have been gifted, room has been made. Now its time to maximize the Scroggernaut 2.0
Likes
5
Share
This plant seems to have grown much denser and better than my first plant. I just got the ac infinity ventilation setup with controller 69 for my 2x2, still trying to learn, hopefully grow #3 goes even better. Stay tuned
Likes
15
Share
This grow turned out to be quite a journey. Originally, this run was meant to be a simple between-grow project, something to keep the season going outdoors, without too much effort. But plans changed, and the Orange Sherbet ended up in the tent, where it took a completely different direction than expected. She grew big and strong early on, but the LST was tricky. she didn’t respond very well at first, and shaping her the way I wanted took a lot of time and patience. It was interesting to see how she stretched and filled out later, but overall, the structure stayed somewhat awkward to manage. Throughout the grow I struggled with CalMag and potassium balance. I tried several adjustments, sometimes with high CalMag doses, but it never fully stabilized. It’s still unclear if that came from the strain itself or from the BioBizz line, but it made the mid-to-late phase more difficult than I had hoped. The flowering time was also much longer than advertised. the breeder mentions around 9 weeks, but in reality this one took closer to 14–15 weeks total. What was supposed to be a quick side project turned into a long, demanding run. On the bright side, she delivered a very solid yield. a bit over 160 g of trimmed buds plus another 50 g of popcorn, well above 1 g/W. The aroma is lovely after 10 days of curing: creamy, with vanilla and a subtle orange note returning. However, the buds are airy, not as dense as I hoped. The effect and flavor are great, but visually it’s more on the average side. Even so, this grow was one of the most instructive I’ve done. I learned a lot about deficiency management, humidity control, watering and how far genetics and environment interact. Going forward, I’ll take a break from autos and focus on photoperiod strains again. I just prefer the control and predictability they offer. All in all: not my prettiest grow, but a very valuable one. About drying in dry ferm/dry age and regular drying: the material in the bags took a few days longer to dry which is said to be good (regular dry was 7 days, bags was 9 or 10). initially I think the buds from bags look better but now in curing I can't really tell a difference, not visually and not in the nose. Let's see how everything evolves over time but honestly I am not expecting it to differ a lot from regular drying.
Likes
12
Share
@Bilbo
Follow
Think they have a couple more weeks maybe. looking good so far
Likes
5
Share
Have got the soil good ph i am pretty sure. I have got good growth out of the last week and few inches and some fan leafs and they look just barley burned and they are way happy standing up so I am thinking (fingers crossed) that I have got it under control. Going to do a trim and take some clones in the next week. Then a train for a couple weeks and put her in in flower tent get used to that light and flower her see what I get. Still just doing declorinated water at 6.5 let the soil do her job. Stay tuned
Likes
35
Share
Bueno familia ya finalizamos, estas red hot cookies son una cepa bestial. La verdad que el secado muy bien 7 días en Malla y a los botes, 45% humedad y 23 grados es la temperatura ambiental que han tenido en el secado. 4 plantas que se cultivaron en un armario de 1.20 pero estos ejemplares solo ocuparon 80x80. Así que ya está cultivada esta gran variedad que es novedad este 2020, americana de la familia Cookies, la Tropicanna Cookies (Girl Scout Cookies x Tangie) con un porcentaje de thc entre los 17/25%, una bomba. Que decir de Agrobeta, lo peta 💪 en cuanto a nutrientes. Un saludo y buenos humos.
Likes
57
Share
Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎