@FAST_BUDS, Hi all the happy people here in GrowDiaries. This is my second cultivation ever and it will be fun to try a bigger space than my closet grow. First, I'm just going to say I'm done with the construction of my new growroom. I put some pictures on the construction here in week one. The room is 2.14 meters by 1.7 meters and has a ceiling height of 2 meters. It provides a floor area of ​​3.6 square meters. I use a 54 Watt Lightwawe T5 for germination and 2 Pcs 400 Watt HPS lamps. I have a channel fan that replaces the room air about 40 times an hour to get a comfortable environment in the room, the air enters a fresh air intake from the outside. The air is purified through a carbon filter to then leave the room to the rest of the basement. Then I use that heat to heat the rest of the basement. I will use 8 pcs 15 liter Autopots to grow with and a 100 liter water tank that supplies the pots of water and nutrition. I will grow completely organically in soil and will watercure my buds to get the best possible medicine for me. ----------------------------------------------------------------------- 2017-09-25. Week 6 starts. Added a video of the girls. Gave the girls water and nutrients. Girl N1 is 60 cm high and have grown 14 cm in 7 days. Nr 2 is 37 cm and has grown 4 cm in 7 days. I flushed the girls yesterday with 40 liters of tap water. Im lowering the humidity in the room with a dehumidifier and try to have 50% air humidity. ---------------------------------------------------------------------- 2017-09-29. Installation of the New light rail in the grow room. Its Advanced star light V 5.0. Added a video of it.

Week 5 of flower is over! This grow is going by so fast because I'm so busy with so many other things I feel like I haven't really paid much attention to these girls but they are doing so well. Bulking up heavy now. Smell is amazing. Very dense buds. Can't wait to try this one out. Few weeks left now.

All 3 plants are looking healthy and occasionally even look happy when I'm not stretching their limbs out all over the place 😒 Not alot of progress on their height but they look like they're doing alright so I'm not gonna worry too much yet, I could really do with these being nice and short so I don't have to mess about raising the shelf up 🙄 That's all for the moment, just watering and moving the branches out, it's nearly flowering time 🎄 Happy growing everyone, take it easy 😎🌿 30th October All 3 plants are doing well and responding nicely to the lst, every day I move a bud site away more and new ones just keep popping up all over the place 🌿 not alot of vertical growth which is fine by me just don't know if that'll negatively impact my yield 😕 but they're more than likely getting ready to shoot up 🌱

The girls continue to grow very nicely! All the girls have gone into flowering and I have upgraded to the 600W light now to push these girls and see what we can get from the final harvest 😋 They are still on the vega feed for now whilst they are in the early flower stage. Not alot to report except the front girl had a very slight amount of nute burn but rolling with it as the other girls are fine and its minimal signs so far! If it gets worse maybe will adjust the feed!

First off I just want to say for some reason it’s not letting me change the right temperatures on my diaries ! Each time when I put it in they stay at 50. My day air stays 75 degrees an , night degrees is 70 ! Today is day 58 for all these ladies! This week has been really great ! Girls really progressed a lot , especially for one the Forbiddin Runtz, looks like is gonna finish up in a week or 2 ! Other then that they are coming along well! Keep those eyes peeled for next week! Cheers😶‍🌫️💨💨💨💨

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D22/V18 - 07/05/24 ⚗️ EC: 0.7 pH: 5.3 🌡️ T: 22 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D23/V19 - 08/05/24 ⚗️ EC: 0.7 pH: 5.3 🌡️ T: 22 °C H: 50% 🌊 🍗 💧 💼 Topping and LST 🧠 🚀 🎬 1 TL video of grow and one of the topping ______________ 📅 D24/V20 - 09/05/24 ⚗️ EC: 0.9 pH: 5.4 🌡️ T: 19 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D25/V21 - 10/05/24 ⚗️ EC: 0.9 pH: 5.4 🌡️ T: 19 °C H: 50% 🌊 12 L 🍗 Calmag, Grow A-B, B52, Hydroguard, Rhino Skin, Bud Candy 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D26/V22 - 11/05/24 ⚗️ EC: 0.9 pH: 5.4 🌡️ T: 19 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 Out of Home 🎬 1 TL video ______________ 📅 D27/V23 - 12/05/24 ⚗️ EC: 1.0 pH: 5.3 🌡️ T: 20°C H: 50% 🌊 🍗 💧 💼 🧠 🚀 Out of Home 🎬 1 TL video ______________ 📅 D28/V24 - 13/05/24 ⚗️ EC: 1.0 pH: 5.2 🌡️ T: 20°C H: 50% 🌊 🍗 💧 💼 🧠 🚀 Out of Home 🎬

I know it's not good box but I can do only this at this moment and think it's will be better then to put near window

Using some Neem oil and hydrogen peroxide ONLY ON MEDIUM (since I'm in flower), to get rid of these dumb fungus gnats I think they are the reason for the brown spots forming on the leaves. Installed a trellis this week to help spread out the canopy and improve airflow, however when I did this my dumbass accidentally snapped one of the colas, luckily I think it'll be ok because it seems to have only snapped the outer skin layer on only one side of that stem (I wrapped a piece of duct tape around the little snap to help secure it). This week went well I think I've got the fungus gnats under control, the stem I partially snapped still looks to be completely healthy and growing well so no complaints here successful 2nd week of flower👍🏾

buds are getting heavy. around 32-35 more days of flower expected.

Welcome back to another week, finally decided to flip to flower as these girls do grow pretty quickly in DWC. Aiming for some nice quality buds bit also a decent yield of at least 1 gram per watt of light. Nutrient solution has not been changing to complete flower schedule yet but I will be sure to switch it over in a few days. The crucial part now is keeping the EC and pH in a good range to avoid any deficiencies or Nutrient lock out. Let's see what the stretch brings the first few weeks. Stay tuned, and I'll be back for the by the end of the week to report some video feedback. End of the week has ending with a heavy defoliation session. Plants were getting bushy and covering potential tops so that needed to be addressed. For now, it will be selective defoliation once they have recovered, which should be in 2/3 days. Let's watch them bounce back. Stay tuned for week 2. Check out my YouTube and Instagram channel for a closer look. (Link on profile)

The grow took 13 weeks and 3 days total, all my blue dream got harvested between 12-14 weeks, thats really good with the yield that comes of them

Sur un ensemble de 10 graines, j'ai 7 plantes, je ne maitrise pas encore tout a 100. %, mais je tire parti de mes erreurs. 🌱 ⚗️J'utilise un PH - qui affiche NPK 1-5-0 pour le debut

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Well, it’s underway... I can’t wait to see everyone’s diaries coming along at the same time, especially now I’ve found some others in the competition with the same strain. So to start off, I popped the seeds into lukewarm water until they all stuck out a taproot. This process approximately took 24 hours. After that, I placed the seeds straight into a 6.0ph damp mixture of coco coir with perlite, mixed with a low dose of monster bud mix, supplied by Zamnesia. Then I placed the pots under the LED light for one night and 4/5 girls have put their heads up. I’m going to give all 5 seeds about 2-3 weeks in small pots to reveal which plant has the strongest genetics, followed by the best being potted into the competition pot provided by Zamnesia. Good luck to all other competitors and fellow home-growers.✌️🏽😋

This is now the one before the last week of my grow. Since it's my first grow, I'm not sure when to harvest, I wanted to wait another week and then harvest what do you think ?!

Decided NOT to water one more time. Put into the dark around 1:20 P.M . Usually do 48 hours, might just do 24 this time. Leaves are still a great color and very healthy. Took the light out of this tent. Going to attempt to rearrange things AGAIN! Spider Farmer 2x2 was just at 90 rh! Thinking of moving that light ( Alphapar) back into the Alphapar tent. Can't remember why I moved it in the first place, think it was for drying another.

Day 8 - First official day of veg and both ladies are looking good and on schedule for a couple of changes. Nutrients: 10ml of Hydro A & Hydro B were added to both buckets (10L of water in each bucket) PH: the Milwaukee PH controller was set to work - starting at a PH of around 7.6 - 7.8, it slowly worked down to a perfect 6.0 over about 50minutes. Lights: The lights were readjusted to be 60cm from the seedlings who are all between 8-10cm tall and the intensity of the lights were increased to about 70% brightness. Day 9 - Both plants are taking nicely to the adjustments and I am happy with the progress. Temp and humidity are stable and PH is controlled. Day 11 - The second nodes are clearly visible today for both Chong and Max which would hopefully put them at 3 nodes by the end of the week - right on schedule! Day 13 - The ladies seem to be showing some signs of heat stress, so thinking about adjusting the lights after their period of dark today because they are due to be adjusted tomorrow anyway for the new week of veg

😉