Sometimes things don't go the way you want to and are out of your control. That's precisely what happened to me last week. In the middle of summer, it wouldn't stop raining for over a week, causing the humidity to skyrocket in my room. That's the last thing you want in week 8 of flower, especially if you don't have something like a dehumidifier. So unfortunately I found a spot of botrytis developing on one of the main colas... I cut off the whole cola that was infected. The next day I found another spot, unfortunately, so I decided it was time to cut my losses and harvest what was left. I would have loved to let her ripen a week or two more, but that's life sometimes. Fortunately, there are still 2 big, main colas and lower buds left!

Plant is growing really quick, it started slowly but with a good root system it started to grow and grow non-stop. As you can see at the timelapse of the last week it also went outside of the recording frame. As commentedbefore it had signs of some over fertilization and it still has a bit of it, but i think it will go further. day 27 update. the signs of over fertilization are increasing at some leave tip, but i will wait more to take action. One thing is secure now, this plant needs less nutrients than the GHE table shows. I will wait about 1 week more which according to seed bank and some diaries is the aprox time remaining to start flowering and will apply 70-80% recommended dose.

Week 19 november - 25 november 23 november - D1 flowering I watered it a little too much. as it is colder I will start giving 1.5L of water instead of 2L

Plante exceptionnelle !! Elle m'a donner 210g dry cured et l herbe est juste magnifique niveau goût comme effet !! Et en plus de tous sa en seulement 12 semaine .merci mr fast bud^^ et c est une plante qui pousse sans difficulté faudra juste faire en sorte d avoir du cal mag et une bonne dose de nutriments^^

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Plants took a tumble while I was at work and came home to everything laying on the ground like a robbery. I also learned that my plants wasn't burning but in fact when the tree hit the deck the 33C heat and the roof torched the leaves. The vertical growth is slowing as it only grew 4" in the week so far, next summer hopefully I will use 20 gallons and not 12. Just solid knowledge for next year as I wanted all 3 tree to hit around 6ft after the stretch and all the training. Lost a few main branches on this plant so idk how realistic 1.5lbs is at this point

I think this girl is tryin to be pinky ! Hey ! On this last update, you can see two different phenos, 1 took purps tones quickly and the white one really smells like grass for the moment !

Day 68-16/02/22 I’ve harvested 6 of the 25 so far they are drying some more to come down over the next days all buds looking juicy and crystals everywhere!!!

First week in water.

Day 32 to 38 of flower Basically the girls are on autopilot, with the autopots and Gaia green there really isn't much to do, both methods are super user friendly and the basic needs that need to be meet are just ph water in the reservoir every couple days and then watch them stack buds on top of buds...Occasionally I move a branch over to another square in the net to make room but Basically after the last top feeding it's just watch and weight, pun intended....

5/12/2024 happy Mother’s Day to all the ladies and buds 5/15 super frosty sugar leaves. I can visually see them standing, that they are so tall 5/18 end of week 4

Ladies and gentlemen, we are now entering the last week of flowering and finishing her 6th month alive! I got attached to her, will be difficult saying goodbye, BUT, these juicy buds are so worth it. I've been flushing her with 3 liters of water every 2 days, and despite one cloudy day the sun appeared most of the time. I hope she gets a little fatter this last week. The smell is incredible. Strong enough to notice when you're near, but not strong enough my neighbors will get it, perfect! I assume in a tent she'd be stinking everything up with her sweet, sweet smell. I can only imagine how her kief will be 🤩 Thanks for visiting and see you next week for one final update!

An in to soil she and her sister testers go, i know that for know everything looks the same , apart from the photos, but this will start changing with them growing. For now all of them are growing pretty much the same and now that they move in to soil and start feedings they will start showing the phenotype and genetic differences, but for now all looking great , healthy and strong af!!! Haded a intro video from seed in to now, including how i transplant and what i use wen doing it so, and from here the moon is no limit for this babes i believe , so stay tuned as this testers they promise to be a interesting ride <3 <3 <3 She is growing amazing as all of them are, this one in particular is my favorite, but for now the only reason is her being number 9 hehehe As always thank you all for stoping by and for supporting me on this journey, i am super passion about growing and fell blessed to have you all with me on this new journey <3 <3 <3 Genetics - Fast Buds Tester 08 09 10 11 Ligth - LUMATEK ZEUS 465 COMPACT PRO 
Food - APTUS HOLLAND #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #fastbuds #dogdoctorofficial #growerslove With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 
All info and full product details can be find in can find @ https://2fast4buds.com/ wen released 

https://aptus-holland.com/
 
https://autopot.co.uk/ 

https://lumatek-lighting.com/ <3 <3 <3 Growers love to you all <3 <3 <3

Everything is looking good so far. They’re all done stretching and the cheese and black garlic have stretched the most. I adjusted each plant with boxes to create a more even canopy. Buds are swelling up nicely. The two black berry breath plants are looking swollen and fantastic. I don’t like the structure and bud size of the black garlic plants and will not be running them again. Although, they’re getting quite keify and the breeder claims they have a genetic trait that make them put on most of their weight late in flower. So far I’m not too impressed by their size. The seedsman Badazz OG cheese has got good node spacing and structure but has very little trichs and smaller buds. I was just running the cheese to test old European genetics and my bias is starting to confirm my bias. Dutch and Euro genetics are shit. The slurricane #4 is looking fantastic in terms of frost but the buds are lacking a little in size. I’m going to do the 21 day strip today. I should have done most of this defoliation earlier in veg but right now is still fine. Ice cream cake #1 hermed which isn’t at all surprising so I scrapped her. At least it gives me more space to get in and tend to the rest of the plants. I got a pump sprayer to get in a bit closer to the plants as well.

3 Pheno’s 🍪🥜🍬⛽️ from clone 🌱#dosido

as it is so important to let the plant develop its roots, i wait a few weeks to do the first topping so the plant has better conditions to recover. The topping helps to stimulate the growth of the plant itself. This method may "stress" the plant but actually stimulates it. But doing this we are delaying its growth, that is, it takes a little longer. But no problem! Then after a few days She Will be transplanted to the final por. what do you think ? looks weak, doesn't it? don't be fooled. in the next entry you will see how it looks... a monster 🥦🥦

it's harvest time 😀😀😀😀 check www.sr-organics.com for some topnotch 5 in 1 fertilizer! root, growth, bloom, micro-organisms, enzymes & vitamins all in one! CODE: "Unkraut10" for 10% Discount! 😊

I wish it was easier to upload media here. That's why is taking me so long. Stretching everywhere, she went from 3 feet to 6 feet in a heartbeat. She is running into the light. I raised the ppm because I'm going to turn 600 watts on. They look healthy, but too much legs.

Plants are doing great. I thought the 7gal would be more ready by now but you can see the difference in the macro shot from last week. Colours are changing a little as it's cold here and the room the tent is in gets down to 15-16c at night. The air is also dry af This is great, cannabis loves low humidity and a good 10 degree difference in day/night temps in flowering. Trichomes still cloudy and not as amber as I'd like I like breaking out the nikon to check the trichomes every couple days. The look remarkably similar from seed which is awesome.