Likes
Comments
Share
@Reyden
Follow
Sono ultra carico insieme a queste bimbe che non vedono L ora di fiorire e quindi vedrò di accontentare il loro desiderio 👌😎(anche il mio) Sto pensando di fare qualche training ma ancora devo capire bene cosa e come 😅 Quello che è sicuro che questo fenotipo mi farà impazzire letteralmente perché amo kush e afghani 🖤 Aspetto di dare una carica di azoto nella prossima innaffiatura perché vedo che manca e vuole più cibo!
Likes
4
Share
10/11/24 she had gotten so overly dry that she was impossible to water. i had to scrape and break of the dry spots all around the soil and root ball so that water could penetrate. she was root bound from a solo cup and then as well from 1 gallon to 3 gallon. once the rootbound spots got overly dry, they became super hydrophobic and i didnt realize how bad it was. that may be what's been affecting the over all health of the plant. finally able to get her to hold weight in water so im hopefull 10/15 pistils are getting thrown out everywhere. a bit of a stretch so far but not too much. maybe a couple inches or
Likes
43
Share
~Entry for the 'Best Rarest & Smallest Pot by Seedsman' contest~ Starring 🤩.... ~ Seedsman Zkittlez Auto ~ Zkittlez (Grape x Grape Apple) Auto x Auto Fruit (Auto Fruit Cheese x Auto Blueberry) Zkittlez Auto is one of the very sweetest-tasting auto strains available anywhere. It is a sativa-dominant (60%) strain that was bred from Zkittlez (Grape x Grape Apple) Auto crossed with a male Fruit Kush Auto, the latter a remarkable fruity strain bred from Fruit Cheese Auto and Blueberry Auto. Growers can expect to harvest some good yields of high-THC buds. Zkittlez Auto remains a fairly short plant, rarely exceeding 120 cm. in height wherever it is grown. This is a vigorous plant which is able to metabolize a high level of nutrients and she's a thirsty girl too! If growing indoors close to neighbors it is strongly advised to ensure good and effective carbon air-filtration in order to neutralize powerful odors. This strain's life-cycle is approximately 90 days from seed to harvest. The leaves on this plant are big and wide serving to convert every lumen available into Zkittlez goodness. Indoor growers should obtain between 400 - 500 gr/m2 while plants cultivated outdoors will produce slightly more at 500 - 600 gr/m2. Lateral branching is very good and it is recommended to use supports/ties to prevent snapping and keep buds close to the light source. This strain's scent is sweet and fruity with candy and berry notes. Its high-THC has been measured at between 21 - 24% with less than 1% CBD. The effect is well-balanced, cerebral and euphoric, and is very good for social situations as well as for relaxing in front of the TV either alone or with company. It also has the added effect of helping to relieve chronic pain, helping with nausea, insomnia and depression as well as stimulating the appetite.** **Credit to Seedsman.com ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~ The Setup ~ ~ Grown in a 2qt plastic popcorn pot filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seed was germinated directly in the medium without any 'pre-soak' ~ Feeding will be by Dutch Pro Nutrients ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Update: 11/29- Here we go into the Zkittlez beginning stages of flowering... How exciting is this! Today when I checked her pot it was light so I went ahead and watered/fed her with 0.25g of well water with a base ppm of 100 that I allowed the excess to drain to waste. To the well water I added the following Dutch Pro nutrients: Grow 'A' & 'B' @ 10ml/g (I'll be switching to the "Bloom" next feed), Multi Total @ 7.6 ml/g, Take Root @ 3.8 ml/g, Silica Von Liebig’s Special @ 1.2 ml/g along with Earth Juice's Oily Can @ 5 ml/g to end up with a total 850ppm nutrient solution. After adding the nutrients and checking the EC, I ph'd the solution to 6.0 @ 74℉. 12/1- Today after doing some HST (twisting and bending branches), I went ahead and watered/fed her with 0.25g of well water with a base ppm of 100 that I allowed the excess to drain to waste. To the well water I added the following Dutch Pro nutrients: Bloom 'A' & 'B' @ 10ml/g each, Multi Total @ 7.6 ml/g, Silica Von Liebig’s Special @ 1.2 ml/g along with Earth Juice's Oily Can @ 5 ml/g to end up with a total 900ppm nutrient solution. After adding the nutrients and checking the EC, I ph'd the solution to 6.3 @ 73℉. 12/3- Today I let her dry out a bit more and will be watering/feeding her tomorrow after 'lights on'. Today all I did was take a quick video of her, check and rotate her pot and do a little HST on her main branches to keep her canopy as even as possible. 12/5- Well this little lady is getting big enough now to require daily watering as she's a very thirsty girl! I'm now watering until runoff daily with 0.25g of well water with a base ppm of 100 to which I added the following Dutch Pro nutrients: Bloom 'A' & 'B' @ 10ml/g each, Multi Total @ 7.6 ml/g, Silica Von Liebig’s Special @ 1.2 ml/g along with Earth Juice's Oily Can @ 5 ml/g to end up with a total 900ppm nutrient solution. After adding the nutrients and checking the EC (1.9 EC), I ph'd the solution to 6.3 @ 73℉. I also kept up on canopy maintenance by doing some lite bending of her main branches and ended with giving her pot 1/4 turn... See you next week! 😎❤️ ~ Thank you from the bottom of my heart for following my grows and for all the ❤️and support you give! 💚What you grow - Grow what you💚
Likes
Comments
Share
Well we thought something was wrong with our white widow being that from one day to the other she was crooked and looking Ill.. so we cut her way before time.. BUT (bud hehe) after closer inspection it was a block of in the autopot.. so she prolly could have bounced back..
Likes
216
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Nothing Special to say, Buds keep coming along and more and more frosty, some leaves turn to purple, others to yellow, Need to follow that the, next days. 💧 Give water each 2/3 days. 1,5l Water + Easy Plus 1,5l Water + RQS Bio Flo Pack + Sugar Royal PH @6 - Easy plus tabs 1 tabs/6l water - Bio Flowering Booster Pack Thicker Flowers 1 ml/l Bigger Flowers 1 ml/l Sweeter Flower 0.7 ml/l 💡Mars Hydro - SP 3000 100% 46 cm. 🔥 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾💚🌲. Mars Hydro - SP 3000 💡💡 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light Zamnesia - Gelato Auto🌲🌲 Discount code -20% with GROWITGD code 🔥🔥 https://www.zamnesia.com/7688-zamnesia-seeds-gelato-automatic.html
Likes
67
Share
@Hashy
Follow
Grow diary 11 Stage 1 Days 1-10 By day 4 all was looking good, she had a root coming out the bottom of the cube. Day 6 I transplanted her to the 3 inch rockwool cubes that had been soaked for 15 mins in this stage nutrient solution and left to drain for 15 mins, then she went into the bigger propagator. Day 10 she no roots coming out the bottom of the 3 inch cube yet. Over the last few days she has been getting more exposure to the fan, with the lid of the propagator the humidity is on the low side, but i want to get some air movement around her. She has grown o.k over the last 10 days. She looks healthy enough and is where I would expect her to be in growth. She is the ugly duckling of the grow so far, I always find when I grow gorilla glue or anything crossed with a gorilla glue I get funky 1st and usually 2nd sets of leaves. Temp Max 30.6c Avg 26.6c Min 21.2c Humid Max 85% Avg 69.7c Min 45.7% VPD Max 1.86 Avg 1.03 Min 0.44 Hopefully back in 10 days
Likes
23
Share
@Fatnastyz
Follow
So excited to be finally drying her. She may have went another week, but it was time. She was quite the trooper! She survived over feeding and over watering. She wore her battle scars proudly though! Very nice nuggets, very little larf. Like maybe less than 10g. 💪👌 So very glad I have another, she deserves her own space! Mouth watering strain Im glad I got to grow! Again, TYVM Clarissa @Weedseedsexpress She is amazing and just as I hoped! Weedseedsexpress.com
Likes
3
Share
Likes
29
Share
@Rangaku
Follow
Good week of growth , defoled and tied up some more she’s ready to flip this week . Let the terps begin
Processing
Likes
20
Share
Im very happy with the progress so far. One of my better vegetative periods thats for sure. I removed my scrog as it was annoying to work with I did only water 1 time this week. Gave them around 1,2 liters each. Some a little less. PH 6, nutrients solution strenght is at 100% and they seem to be loving it. No signs of defficiencies to my knowledge. My grow tent is a little hot peaking at 30 celcius with a average around 29 at day and 18-22 celcius at night. Humidity is around 35 as well. My humidifier broke. I have fixed it and using it for my lemon tree and my vegetables that i got growing as well The smell is heaven like when i open the tent and some of them have the smell i am looking for so im really excited.
Likes
4
Share
@MistaOC
Follow
************** 13.03. Day 1 ************** 🤞🏼😎 I have new cuttings. Sour Frootz from Karma Genetics. I planted the cuttings in 0.2 L pots. I only applied fertilizer to the large pot. So Let’s grow again 💚💯 ******************************************* 18.03. Day 6 sprinkled with bactrex and transferred into the large pots *******************************************
Likes
2
Share
@m1ndofAC
Follow
Started off week 2 of flowering on 11/19. All of the ladies look good with the Tangerine Dream being the only set of clones to start showing bud sights and not just pre-flowering. Did a significant amount of clipping and clipped most of the fan leaves on the main colas of my ladies and side branches too. I also began playing classical music for them! True to it’s genetics my Tangerine Dreams are putting off numerous side branches with side branches coming off those branches! Since flowering my Cotton Candy has grown the most. Before flowering it was just barely half the height of my TDs and now they’re taller! As for the Chronic Thunder it’s always been the tallest but in flowering it’s focus has all been on the side branches without me even topping it.
Likes
295
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Senesence in progress, but not yet ready for harvest, Harvest next week ! Continue flushing, 💪 Not too much work, just removed some leaves. 💧 Give water each 2/3 day 1.5 l Water + Flash Cleaner PH @6 RQS - Easy Bloom Booster Tabs 1 tabs/5 l RQS - Easy Grow Booster Tabs 1 tabs/5 l RQS - Easy Micronutrients Plus 1 tabs/5 l (1 watering each 10 days.) 💡Mars Hydro - FC 3000 50% 50 cm. Mars Hydro Fan kit Setting 7 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller RQS - Titan F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/624-titan-f1.html
Likes
22
Share
12/25/2023-Germination Day 1 Merry X-mas 2023 I decided to start a run of SolFIre Gardens Hoodz Candyz S1. I am going to do a cup filled with RO water a touch of Hydrogen peroxide and let it sit for 24-48 hours until I see tap root then I am going to put it into a rapid rooter.. Tap root Down and put it about 1/4 of the say down the Rapid rooter. I made some modifications to my basket on this run.. I have taken a few Pods that I use for my cloning machine and decided that I am going to try and use them as sure plants, so that I can take my water right up to the bottom of the basket this time and see if these can make my planting more consistent.   12/26/2023-Germination Day 2 Tap root achieved Planting Commencing 12/27/2023-Germination Day 3 Misted the dome lightly misted the rapid rooter and added a little water to the bottom of the pan to encourage root growth to the pan. 12/28/2023-Germination Day 4 Ground Hogs day 12/29/2023- Germination Day 5 She is up, she has broken surface, I misted the root riot, and around the bottom of the tray to try and entice root growth down rapidly. 12/31/2023- Germination Day 6 Ground Hogs Day 1/1/2024-Germination Day 7 HAPPY NEW YEARS!!.. I did it I planned it out so my planting day would fall on New Years and it worked.. Yay!!! 1/2/2024- Germination Day 8 Since the roots are not to the water yet, I am pouring one cup of water lightly on the hydroton around the lady to try and encourage root growth down to the water.. 1/3/2024- Germination Day 9 Ground Hogs day, will continue until roots hit the water. 1/4/2024- Germination Day 10 Ground Hogs day, will continue until roots hit the water. I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/5/2024- Germination Day 11 Ground Hogs day, will continue until roots hit the water. I am going to change the water Sunday and kick off Week 1, I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/6/2024- Germination Day 12 Ground Hogs day, will continue until roots hit the water. I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/6/2024- Germination Day 13 Ground Hogs day, will continue until roots hit the water. 1/7/2024- Germination Day 14 Ground Hogs day, will continue until roots hit the water.
Likes
13
Share
@Lfuego22
Follow
Good week. Day 41-48 from clone about day 21-28 in veg 3 weeks in clone
Likes
19
Share
It's been a pretty good week. Carl 2 stretched out like a motherfucker, nearly a four inch stretch as of today. The accidental topping due to blunt trauma a while ago seems to have stopped the stunted growth and allowed it to really shoot upwards and outwards. The split on UKBS 2 is still necrotic, and the effects seem to be travelling down the stem. I have a fan on it for airflow and I'm hitting it twice daily with a vinegar solution to try and kill off what seems to be white mold in the stem. As of recently the spread has slowed down somewhat, so I'm feeling hopeful. Next feeding it'll get hit with another round of nature's candy and velokelp to try and build some strength back up and come out a real winner in 3 months or so. The tent has been flipped to 12/12, but the outdoor plants wont be flowering for another 3 months-ish minimum, so this diary's gonna get a little interesting in terms of week type. Carl 1 is incredibly stretchy inside the tent, almost 6 maybe 8 inches from when I flipped and Scrogged. Gave Carl 1 a fat haircut a couple days ago, she reacted quite well. Updates will come throughout the week. Happy growing and thanks for checking out the grow. By 5/11/2021 - I've acquired some peroxide to try and assist UKBS 2 with the mold/pathogen issue. The previous night's application seemed to work, and I applied again today. Hopefully she'll pull through. One of the main stems is drooping massively, I may lose it but hopefully not.
Processing
Likes
5
Share
Things are moving along in flower. Really pleased how these Rainbow Pie girls are really bulking up. They all seem to be praying up to the light and happy. the wedding cake pheno ended up being a real stretcher. She was the shortest plant before flipping into flower.
Likes
15
Share
@AK1210
Follow
New flowering continues to develop on this lady, she seems to be swelling up day by day. Yellowing of the fan leaves has started which usually means it's time to flush, I need to check the trichomes to see how amber they appear before I do just in case the flavour or yield could be effected.
Likes
8
Share
Fantastic strain, very happy with the 3 phenos I'm growing, this ak420 has a very sweet and floral aroma, I'm very happy about her, cannot wait to smoke those nuggets to taste the flavor, I know it's gonna be very sweet! 🤤💚❤️💛🔝