Recommended
Processing
Likes
4
Share
Segunda semana subida de temperatura es evidente que no les hace mucha gracia nada mente todavía hace sol y procuro meterlas en casa por las noches para que no pasen frío y no se estresan
Likes
10
Share
Been too busy to update the last few weeks, but they’re surviving longer then I expected. When I received my new light I did not take in consideration of the heat output and within the first night of use the tent reached a scorching 88 degrees
Likes
19
Share
She’s a fast grower! Getting big quick. She is also getting natural sunlight in through the window when conditions are good. At 18 hrs on & 4 hrs. off, she is under a Phlizon ph2000 watt.
Processing
Likes
6
Share
This week I transplanted all of them and started lst training. Of all 3 strains I’ve got going, gummy buns defo has the best vigour and structure on nearly all of them.
Likes
1
Share
@Ti_BR
Follow
This is the day 21 of flowering. I Will defoliate the plants today. This is my First diary, so i dont have pics of veg stage. The OGs and Gorillas ghosts are Very different. The OGs Veg feed was 0.8 EC on first weeks, then 1.0. Now on flowering they feed 1.1. Very low. The gorillas liked 1.3 EC on Veg and now they are feeding 2.0/2.2. I aways mensure de entrance feed and the runoff of each one. I expent almost 90 days on Veg becouse the GG delay a little at the beginning. My mistakes, a little overwatering and low feed. I underfeed the plants on First week of flowering to finish the nitrogen on substrate, so the bigest GG show calcium Def signs (you can see on imagens). But now is solved, they are health green again. Soon i Will post New pics.
Likes
14
Share
@AndrewC
Follow
So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.
Likes
11
Share
7/6 Plants looked great thos morning. I WATERED A GALLON to the 50 and split one between the two tens. Top of the bags are still moist amd they still have some heft. I'm hoping this will at least carry me 48hrs. These are BIG plants and the wind goes right through those bags and dries them out. I'd rather have that though than worry about overwatering. I noticed some minor deficiencies on a couple plants so it's time to start the nutes. Calcium I'd guess. Just a beginning stage but it's time. Next feeding they'll get some food too. I'll still monitor during the day to make sure they ront dry out. It's amazing how fast they come back after they dry out but it stresses them.
Likes
17
Share
11/6 Fed and watered. Each took a full gallon. 11/8 They are really drinking up the water. They were dry already so I watered each with a full gallon. 11/10 Watered each with a full gallon 11/13 Watered and fed each with a gallon.
Likes
4
Share
@pzwags420
Follow
On day 1 I changed out my reservoir. I lowered my nutes to 650 ppm(25% reduction). I adjusted the PH down to 6.1. My left plant has some burnt tips from either PH shift or over fertilization. My hope is that the lower ppm will help to resolve the issue before it spreads. On day 2 I adjusted the reservoirs PH from 6.3 to 5.9. On day 3 the reservoirs PH is 6.0. I installed my new 200 watt HLG Rspec. I adjusted PPFD readings to 700-1300 PPFD on all tops. On day 4 I adjusted the reservoirs PH from 5.8 to 6.2. On day 5 I adjusted the reservoirs PH from 6.4 to 6.0. I diluted my nutrients in my reservoir by removing one gallon of nutrients from the rez and and adding 2 gallons of straight tap water to the rez. This brought the nute concentration from 770 ppm to 540 ppm as the plants will be entering the ripening stage in a few days and they have too much nitrogen judging by the extremely dark green leaves and burnt leaf tips on some branches of the left side plant. The buds seem slightly smaller then my last run which may be due to an excess of nitrogen and maybe not enough light as some of my tops are taller then the others making proper PPFD challenging. All in all the girls are coming along nice and I look forward to the final weeks of flowering 😀 On day 6 I adjusted the reservoirs PH from 5.9 to 6.2. I think I have halted the nute burn as I haven't seen it progressing any more on the leaves. I will continue to monitor closely during these final weeks. The trichome production is increasing with some trichs on top of colas starting to go cloudy. The pistils are turning brown with roughly 40-50% are turning brown all signs I'm getting closer to the harvest window 😆. I dimmed my light to give 600-1000 PPFD to tops. On day 7 I reduced my temps to 75 during the day and 68 at night. I adjusted the PH of the reservoir from 6.6 to 6.1. My reservoirs ppm was too high so I diluted the rez with 2 gal of tap water. This brought it down to 480ppm. The average ppfd to all 14 tops is 604 with no top receiving more than 1000 ppfd
Likes
7
Share
Day 94 Harvesting and making Hash with the cut leaves. 5weeks of veg and 9,5weeks of flowering Pot size 6L
Likes
21
Share
Well and hmmm, there really is not much to say here as you can see. On the bright side she has a head, sort of, we think. All we can do is smile and hope she pulls herself together by the hairs of happiness that seem to be keeping her alive, it’s quite the reach! We have faith and hopefully there is a better report next week. It may be the name she was given but that is another wonderlands story!
Likes
7
Share
@vito_scl
Follow
Se sueltan amarras de LST y se deja de tejer en la malla. Ramas presentan crecimiento del 100% durante la semana. Se sube un par de cms la malla. Defoliación selectiva en día 14. Riego por medio con fertilizantes. Riegos abundantes solo con agua. Pistilos comienzan a ser más notorios. Leve olor. Poda de bajos en una semana más. Ventilador en mínimo durante la noche. Al máximo durante el día.
Likes
27
Share
New Aeroponics "root rain" mist cloner! Holds 2 gallons of water. I added 8 Tsp of CloneX clone/seedling nutrient. PH was 6.0-6.5ish, good enough! These clones inside got zapped pretty hard one day, because I forgot to plug in the water pump one time after playing with it hehehe... Some didn't make it, but most survived! every other plant was watered with just de-chlorinated tap water, for re-hydration. #4 has been selected as the winning pheno! The mother plant had her home upgraded to a 2gal pot. The root ball was not so bound, due to her receiving a root-prune not too long ago, she was re-potted back into a solo cup. I pruned the bottom of the root mass off with a light pinch, and potted her into her new 2gallon home!
Likes
3
Share
She is in full flower now and she will have some large tops as she is not a bushy plant.it has been a rainy last week here in my province in Canada but it's calling for lots of heat and sun for next week Keeping my finger cross
Processing
Likes
1
Share
@Cis420
Follow
El sustrato que estoy probando lo preparé yo y al parecer lo hice mal, estoy con deficiencias. Regando con agua purificada e instagreen de grotek intercalado de calmax, improvisando .... Enzimas también agregue. El sustrato no retiene nutrientes y tiene una textura que no aporta humedad en la capa , estoy regando a diario con pocas cantidades de agua como se hace con la fibra de coco. A ver que tal...
Likes
20
Share
Nice plants 2 totally different phenotypes, as one was already harvested, and the other isn't even half way of flowering after 10 weeks. Nice trichome production, great fresh and fruity smell, this plant is a pleasure to smoke in the end of the day. Dried her upside down hanging in a tent I have for the purpose, at 25c, 30%RH - Only removed fan leaves, no manicuring, been doing that as I smoke, noticed the bud lasts longer and with a better smell and you end up saving loads of time. Really happy with this smoke, smells like proper weed. Maybe was the best time I dried and cure(ing). Only problem is that I'm smoking more as it's so tasty ahaha. Good stuff, thumbs up! PS - I'll start looking for the "original" Zkittlez to try out and check the differences between them. Update: 12 April 2021 - Chopped down Plant #2 So, finally Saturday I chopped her down. She looked now ready and delicious, although I only notice yesterday how many seeds she has allover the place. She hermied in front of me without noticing, not good at all and need to start looking much better and in detail into the plants. Feel like an idiot now. Anyways, it was a full week! Emptied the grinder collector and pressed it down a little, makes a very nice smoke, light but pleasant, the kind of stuff it keep you going all day without the dumb effect. From all trimming made the bubble hash. Got a little too green as the 220micron bag's stitches slightly opened letting some contaminants in the final mix, hence the green color. This was a hit. in opposition to the grinder stuff, this sent me straight to the moon, really heavy stone effect, even thinking was hard. Reminded me those afghan/ moroccan balls we used to get back in the early 2000's. The weed itself it's still drying so the smoke report will be updated in there. 715g of fresh cut plant is good, let's see the potency and the seeds. Might turn it all into bubble hash, if I see it'll be an hassle to remove seeds. On an earlier bud I've cut and dried, smoked it and you can see pure white ashes in the bong. Ain't that a beauty?
Likes
8
Share
Processing
Likes
21
Share
Defoliated some leaves to let light in, chopped one down early as I run out of bud 🙄 it's good for less than 4 weeks flowering. Have them rice water starch again this week in with there food. A layer of frost is slowly forming 😎 hopefully they will fatten up nice and frost up really good to 🤞
Likes
5
Share
Very good week! First two space mangos got the chop. Still have 3 more to go. One of which will definitely be chopped this week, the other two, may be next week before they finish up. These girls smell like fruit loops! Amazing frosting, and density. Very much looking forward to the dried and cured product!! Straight PH water. Not a flush per say, but juat water. No more nutes for these pretty ladies. Loving the fade!