Hello everyone. Day one of germination. Two Tangerine Dream feminized seeds from Zamnesia are officially nesting in the paper towel. Since I just wrapped up a harvest with this strain that flowered in an incredibly fast six weeks, I couldn't resist starting another round. While it might not break yield records, the speed and quality make it a staple in my garden. Can't wait to see these little ones pop over the next few days. With best regards, Growfather.

New to this so let see what happens.

Night Ritual - Wizard Trees Day 116 🚿 Watered every 2-3 days with 2L of RO tap water pH'd to 6.3; I wait for her to dry back to about 5% soil moisture content. As she is approaching harvest, I have slowly reduced the nutrients until she was receiving just plain water. From today, she is just about half way through flush, so another watering and then she'll be left to dry back. ✂️ No work on her this week, she had a good defoliation last week, so she is just sitting there waiting for harvest 👍🏻 🌸 Week 9 of Bloom, and all her trichomes have taken on a cloudy white colour, with her pistils drying and becoming amber. She has been thoroughly flush over the last 10 or so days, so she should be good to harvest in the next couple of days 🙌🏻

9/19 - I did the thing y'all!! Both plants chopped at day 77! These are the chonkiest things I've ever had the pleasure of growing/handling. Time will tell how much they shrink in the dry. The plants are all drying in my dark tent and trying to get close to 60F/60% RH, but really closer to 65F/60% RH, so I don't freeze in my home lol Put up one more vid before I chopped. I still need to take a pic of TA roots, which are pristine!!! If you see the DG root pic, you can tell how hard it got stunted by the vacation fiasco. Can't wait to make some rosin and trim these up! Slightly nervous of drying based on the density, so I cut more dry leaves than usual, but I don't want to risk mold. Next update will be the official harvest post!! ---- Thanks for following 🤙 Always appreciative of tips or suggestions

I am starting a auto moon rock. I will be growing her in 3 gallons of perlite. My 1 gal one was nice, and I am curious to it on a bigger scale. Figured this may be neat upon finishing. 🤞🏻 for a great grow. Thank you Medic Grow, and Divine Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

I think they have started to flower , gonna count from next week tho to be sure its fully transitioned. But there are white pistils on every branch top where the leaves come out.

Welcome to week six! 🌱 Week five was a complete success – all parameters are perfectly aligned. I’ve increased the water conductivity to a solid 3000 and bumped the CO2 level up to 1200 🌿. Light intensity is now set at 1400 µmol in the center and 1000 at the edges, which will keep the plants strong in their generative state 🌞. I’ll maintain these levels until the end of the third week and then start slowly removing the large fan leaves to ensure the buds get plenty of light 💡✨. I’m also trying something new to activate the “Emerson effect” 🌄: I’m running the deep red lights for 5 minutes before sunset and for another 5 minutes after the day ends. This should give the plants a final boost in photosynthesis, helping to maximize their growth potential! Everything’s looking fantastic so far! The Black Cherry has rooted well across different experimental setups, and at the end of the grow, I’ll provide a full report on the best care techniques for both strains 🌺👌. Willkommen in Woche sechs! 🌱 Die fünfte Woche lief perfekt – alle Parameter stimmen. Ich habe die Leitfähigkeit des Wassers auf satte 3000 erhöht und den CO2-Gehalt auf 1200 angehoben 🌿. Die Lichtstärke beträgt jetzt 1400 µmol in der Mitte und 1000 am Rand, was dafür sorgen wird, dass die Pflanzen stark im generativen Zustand bleiben 🌞. Ich werde diese Werte bis Ende der dritten Woche beibehalten und dann langsam damit beginnen, die großen Sonnensegel zu entfernen, damit die Blüten ordentlich Licht abkriegen 💡✨. Zusätzlich probiere ich etwas Neues aus, um den „Emerson-Effekt“ zu aktivieren 🌄: Ich lasse das tiefrote Licht 5 Minuten vor Sonnenuntergang und 5 Minuten nach dem Ende des Tages weiterlaufen. Das sollte der Photosynthese einen letzten Schub geben und das Wachstum der Pflanzen maximal fördern! Bis jetzt sieht alles fantastisch aus! Die Black Cherry ist in verschiedenen Versuchsreihen gut angewachsen, und am Ende des Grows werde ich einen ausführlichen Bericht darüber abgeben, wie sich die beiden Sorten am besten pflegen lassen 🌺👌.

Removed the 2 Xs 1500's (300watts) & replaced them with 2 P1000 (200watts) lights, now running 680 watts. These lights fit in better & have air space all around to help cool them, these lights run a lot cooler than the xs 1500s & only get warm not hot. Started some clones.

Nous sommes maintenant à la 4 ème semaine et pour nous proche du passage box de floraison 🌺 Arrosage TCO cette semaine Topping de la plupart des apex de chaque branche Soin des coupures avec la cannelle Installation du filet de LST Les orties les plus vigoureux ont été tordu pour ralentir leur croissance et faciliter l'installation u plant de canna

As I was planning to harvest this week, I started flushing Mishka with PH 7.5 water and no nutrients as per guidelines.

This run is my first time growing with a DWC set up, and also first time growing from clones. I am super impressed with both growing in Hydroponics and growing from cuts. They had 4 weeks of veg, and it has filled out the tent as much as I intended. The mother plant was a single seed gifted to me from a buddy. This first run will be the first I see of the phenotype in flower. I am praying that i like it and am happy with it, as will seem like a waste of time and effort and money growing it to now like the pheno. I wish I was able to pheno hunt this one. I will be pheno hunting TH Seeds London Mint Cake, as I was very impressed with how that turned out.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE BS AFTER THEY TOLD ME I NEVER EVER HAVE TO BUY OR WORRY ABOUT FERTILIZER EVER AGAIN. THEY ARE A RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

28/12/20. inicio de semana, 75 cm de altura hoy se aplico un nutriente foliar marca mexicana Rootz kelper son un extracto algas y azucarez y se aplico por riego giga grow. este contiene guano de murcielago sesacaron esquejes de ramas bajas todo organico. 30/12/20. hoy se rego con forzasilicia un fertilizante organico de una marca mexicana muy buena en mi pais se puso una estaca de madera para soporte 01/01/21. hoy se aplico un nutriente foliar marca mexicana Rootz💪 kelper son un extracto algas y azucarez y se aplico por riego giga grow. este contiene guano de murcielago 03/01/21. cierre de semana

Feliz feliz y gracias a mis amigos de sweetseeds por la oportunidad de conocer sus semillas la verdad responden muy bien a un cultivo con parámetros de ph y tds ajustados.. Exelente en vista, fumadas y todo 💚😎 Charly grower 👨‍🌾

I'm kinda late on the update, week 11 finished on sunday 4, now is feb 9th. Last time i gave them nutrients was on sunday jan 28th and i'm flushing them since that date. My intention was to take them down this sunday (11) but I will not be at home that day, maybe I'll cut them on monday 12th. Maybe on monday i will add week 12 and then when the drying is done I'll update the harvest. So far it seems like taller plant needs more time, as far as you guys have told me, seems like smaller is ready, but because of time I think I will cut them together. Also my intention es to create a video to participate on 2F4B contest, i forgot to record the harvesting of LSD25 so this strain is my chance.😀

'Not all those who wander are lost' What started out as an experiment, turned out to be an adventure of epic proportions. What hangs here behind me smells like the weed I knew in the 80's, skunky and full. But look at those buds. DAAAAANG.... These are the biggest buds Ive ever grown, I didn't know what darkness precisely did before.... now I know... My god after a few days they oooze cristal liquid from all its holes. They are greasy and sticky, full of weight and I think well hit the 300 grams per plant with this one, taking our total to 600 grams what would be 2 grams per watt used. If that's so, Ill never use another light again! Thank you Mars Hydro for letting us try it. And by god so should anyone wanting to up their growing game. Well keep you posted with the dried results and smoke report! For now thanks for checking us out again and see you soon X Bud and Sunshine!

I said!! it's huge ready for flowering!! one week to change the light schedule to 12/12 I've already lost count of the toppings I've made. I will always take some of the bottom leaves out. that no longer catch light and only waste energy. I water every two days. small quantities and One feeding per week. I make adjustments whenever necessary. I also don't spend a lot of nuts as long as she doesn't really need food as in flowering. you will realize soon