💩Alrighty then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are back to do it all over again 😁 So what do you say we have some fun 👈And what we got here folks is a Strawberry Blast 🍓 🍓 🍓 🍓 Strawberry 🍓 Gorilla , Strawberry 🍓 Banana 🍌 and there new release 🍓 Ztrawberriez 🍓 from FastBuds And we also got Strawberry 🍓 Cola from Exotic Seeds 👉 Well we are doing great so far for day 21 👈 So i have begun to pull them over and do some LST on all 4 plants 😮 So it's been another great week so far 👌 👉 just started there nutrients regiment 👈 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍I've added a RU45 to the mix 👍 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

day of cleaning and preparing the next run , excited to grt this auto run going for divine.seeds aswell

White LSD Auto Feminized Seeds by MSNL 👉Sponsored Grow👈 W2 V2 White LSD is growing slowly at ½ inch this week and is 2 inches tall now. Because I have iridium and copper in the water, the ph meter fluctuates due to breaking bonds between the hydrogen and oxygen. The fluctuation range I see is between 6.4 and 6.9 so I’m reporting 6.6 as the ph for the water. So far, I don’t see any negative effects of the iridium & copper on the plant. The soil base is Happy frog, Coast of Maine, Mushroom Compost and super soil. I’m giving only water to her for this grow. I gave 1 liter of ph 6.6 PPM 376 at 66.7f twice this week As always, thank you all for stopping by, for the likes and most of all growers’ love and support. Stay green, growers love 💚🌿 💫Natrona💫

SO, the girls were doing so well into their second week I decided to do the unthinkable... I topped autos! 😳😳🤯🤯 I figured they were doing so well and hadn't entered flower yet; let's do our best to keep them small and get multiple good buds instead of just one. This will also give me the best opportunity to lst them down using ties. Stayed tuned for that! This girl is doing well. She's in second place right now out of the group. She should easily fill out over the next few weeks and is already entering flower. Dimmed to 40% but increased it today to 60% Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/

My homework. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration.Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems.

Seems like its soon time for this baby to chop chop, been a pleasure growing this, super ressiliant against pests, mold, heat/vold stress. Grown perfeclty all the way, have been showing alot of phosphorus defficiency in the end, some dying parts turning black on leafs, quite consearning since ive never had this problem before. Then again never had a colorful plant as this either before so. Beautiful buds, coverd in crystals its beautiful really, sticky and smells deleicious, cant quite put my fingers on the terpines yet but def alot of fruityness, bit sour. Looking forward for them to ripen up, and flush has begun. See you hopefully in harvest or else another week :) crystals not cloudy yet, just a hint

First time grower ! Ive been around the culture for many years and have always aspired to grow my own medicine ! I love the growing process and maintaining the plants health. That alone is therapeutic enough for me. Thanks for checking out my grow, dont be afraid to ask any questions ! Any pointers are always considered and appreciated ! The Acetylsalicylic acid is 81mg Asprin / Gal water. It promotes root health when transplanting aiding in shock. It has numbing benefits and is an anti inflammatory. Ive always heard good results and ive had no problems using it for the first grow. I cannot verify the breeder of the mother plant. I have no idea where he got his seed from.

I think the plant goes very well... it’s my first time... It is arrived the exact week to use PK13/14, what do you think?

Quite good result considering that she only got around 6h of sunlight, the buds didn't grew too big but they have a lot of THC, this is perfect for people who live in the city and just want to grow some small plants on the balcony without getting too much attention, the smell was really sweet and she offers a good resistance against bugs, and i didn't even applied any insecticide. We are going to use this plant to do a fresh frozen extraction 😁

cortar o no cortar estas dos ! la parte alta ya casi estan en un 5% los tricomas ambar

Привет Садоводы ! дело близится к концу есть конечно и минусы , стали портиться верхние листья , но я думаю она достоит еще пару недель а в общем выглядит не плохо и пахнет приятно сладостями !

Another super terpy tasty baby strain💜 Rockdense buds

Since Dosidos flowered two weeks before all of my other outdoor, it was lacking in size from the veg cycle. Next year I could offset this by having a few more plants or veg inside for a month or two before bringing them out. Other than that this strain had the most resin production compared to everything else! The dried nug looks comparable to quality indoor.

Hey guys, sorry for the late update i was very busy these weeks! I took photos so you can see how they looked 8 days ago. They still didn‘t seem mature enough so i waited a little longer. This week (yesterday) I cut them down and turned on the AC. They will need to Dry for at least 12 days so i‘ll post an update as soon as I get to smoke them. I read that terpenes and canabenoids are synthesized during light hours and some people let the lights on for 24 hours before harvest. So I did exacly that. Thanks for reading my diary 🙏😊

💩Holy Crap Growmies We Are Back💩 Well growmies we are at 63 days in and everything is going as good as can be 👌 👉 So even with some major issues in the early stages , shes bounced back as good as expected 👍Or better 👈 Lights being readjusted and chart updated .........👍Even with early major issues due to the soil/medium she's come a long way 👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Hello friends! 🌱 F028 - The Devil’s Cookie One from Super Sativa Seed Club — Day 23 Everything is going great, and she’s really spreading out — over 30 cm wide now! She looks amazing, with big, healthy leaves, already showing more than 5 fingers per leaf. After topping, she has gained noticeable mass in just 6 days — a real chunky girl 💪 Today we stretched her out again and will continue to enjoy watching her grow. Lighting: 50% power, about 45 cm from the top Temperature — Day: up to 27°C | Night: 19–22°C Humidity — around 80% day and night We are not using any nutrients yet, as the soil is already rich and provides everything she needs for now. We really love how she looks — what do you guys think? Drop your comments, ask questions, don’t be shy! Let’s share experience and knowledge — we’re all here to learn and help each other 🤝

Week 9 of flower and these girls are almost ready to be harvested. They all smell amazing and are extremely sticky and resinous. Should get a decent size harvest of this strain I'm excited to trim these plants up and put them in their curing jars.

Hi Dear Friends, 👨‍🌾 👩‍🌾 Awesome plant, it growed a lot after topping. It is the biggest of the cycle and it is really fast. I notice a HUGE difference compared to other plants growed under the 480w quantum board. The Kush mintz Fast is under the the XS2000 by ViparSpectra and it is bigger and stronger compared to other plants. Small distance between internodes and stems hard like rocks. This lamp is really a beast, can't wait to try the new models!! ✅ VEGETATIVE week #5 📅this week goes from 12/12 to 18/12.📅 💡💡💡Viparspectra XS2000 is working at 50% power. 💉🔍Fertilization schedule:🔍💉 14/12 eposom salts 2g/l foliar and 1g/l irrigation WE ARE BACK!!! We are back after a little pause. We take a break because we were too busy to post high quality diaries. In the last diaries we tried to post as good as possible and we have to publish about 6 or 8 diaries (in addition to these that we will publish shortly). We opened also an educational Instagram page, we growed a lot in a short amount of time BUT, Instagram suspended our account and we lost all our posts, I was so sad and disappointed... a lot of work lost in a night.... In this diary you will see our journey with Kush Mintz Fast by Original Sensible 🤩, sit down and enjoy the show! We are growing in a 15L Smart Pot with Light Mix soil by BioBizz under the AWESOME XS2000 by Viparspectra 🤩 DATA SHEET: Bubba Kush , Animal Mints, Secret Hybrid Genetics: mostly Indica Yield: 650g/m² indoor flowering time: 50/55 days THC: 25% Aroma: cookie mint Effect: happy relaxed 💸💸💸💸💸 Here you can buy seeds of this top shelf strain: https://originalsensible.com/original-sensible-seeds-kush-mintz-fast~21711 _______________________________________________________________________ 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. Until now, built quality is really awesome. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was creazy fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks to Emily of Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 📦120X120 GROW TENT: an awesome box, easy and fast to assembly. Made by strong materials, solid zips and it is totally lightproof. The position of holes is optimal and the two lateral windows will make easier the work inside the box. There is also a double end, so you are 100% sure that dirt or liquids will not spill out. You can find it here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-48x48x80-1680d-4-x-4-size-keeps-all-light-in-top-quality-1680d-canvas-is-tear-proof-and-double-stitched-light-blocking-fast-installation-for-sale 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Eleen of Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA -FANS: A)OSCILLATING FAN D.15cm 2 speeds 20w B) COMPUTER FAN Sunon DP200A – 230V 20w (Strong, reliable and quiet) C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h. High silence and reliability. 💊💉💊FEEDINGS: We used BioBizz light Mix TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

Day 36 second day of 12/12 and no signs of flowering yet. Foliage is growing like crazy, but some could get an idea of how this is going to be a screen of green. To be exact - this will be a scrog plus four adult plants in the corners of the tent....😁. .......basically meaning : i've wasted time enough to cultivate 4 Plants 😯. Considering the experience from my last grow (rather indica-type bushy plants) i will overthink my method of scrogging for future grows. 1.) Build a frame to get a real tight netting 2.) Installing the net as soon as possible 3.) No more supercropping, LST or whatever....... only use the net to steer directions of growth 4.) Strictly remove fan-leafs, taking light from any other shoot this way i'll be able, to make better use of the shoots and branches pointig away from the center - whether mighty big sativas or small bushy indicas........ i'll have way better controll ........hopefully😎 Nutrients: i'm on 50/50 growth/bloom fertilizer...... to get N down i'll fill up with bloom only during the week and leave away GROWTH completely when changing the nutrient-solution next time. Day 39 Visible signs of flowering…….. Time to give a P-Boost! Cut down N and raised P, so it should be something like 10-40-35 (N-P-K; roughly). Next week i‘ll switch to regular bloom-nutrition. The young ladies look wonderful. Shoots galore! Not too much of a stretch yet. Day 40 Lollypopped carefully and took some fan-leafs out the canopy. Tomorrow i'll remove weak branches from the canopy and organize my entire scrog. Now that'll still leave me with 4 trees standing in the corners........ and i made a decision: I'll cut'em!!! .....then i will try to make 'em clones and reveg them. This way i might have some pretty little plants, when spring arrives😎. Wonder wether they can produce roots fast enough to keep the entire top alive. Since this is just an experiment i'll keep it nice and easy - ill make a clean, diagonal cut and put them into a ALL ESSENTIALS-solution (0,3 g/l), then they'll have a cosy place on the floor of the tent while light's on and will move to my livingroom for the rest of the day. Either theyll show roots or die trying.... I'll let you know:-). Day 41 after getting so little N, getting the legs shaved and the hair cut, the young ladies look a bit pale.... nevertheless they drink like crazy and keep growing. Organizing the scrog was easy - now 80 of 81 squares are filled and hopefully i'll find a branch i can weave into the last one....... ROOTS!!!! there are roots reaching out of all 4 buckets into the reservoirs....... but yet the drainage seems to work........ wonder wether it will effect the water in the reservoirs....... reservoir No. 4 is way darker tha the rest........ maybe the pump didn't get the last drop when i changed solution (day 39). now it's time to let them recover a little bit and then i'll chop off their heads 😯. right now i got the idea of cooking some soil in the oven -to get it bug

Hi everyone ☺️. Today the New Aeroponic Diary begins, as before with the wonderful variety Gelato from Zamnesia . This time I planned to leave the full 8 cuttings instead of 3 as in the last run. For test purposes I would like to give a very short vegi time this time. To be precise, I would like to switch them to flowering a few days after rooting. Since the growth is extremely extreme on Aero, I think that a few days will be enough to get 8 little trees 😋. Of course everything is documented and uploaded. Today the cuttings were cut, brushed with clone gel and placed in the aero system 😃. Of course, the entire system was cleaned very time-consuming with disinfectant after the last run, and all seals, pumps, etc. were checked for their function, so that the new run could start today 👌👍. As with the last Aero grow, the Canna Aqua range 😊 serves as nutrients. I wish you lots of fun when you start the diary, stay healthy 🙏🏻 and let it grow 🍀👌 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧