week intel: we getting close to end of ripening , this week i raised drought , Nitrogen and E.C stress by feeding them 2 times per week and raised e.c to 3 to cause real stress that will help increase terpenes production stresses : Nitrogen deficiency Stress by removing the fertilizers that has N in them Drought stress via removing one meal in week high E.C stress around 1.7 and the other feeding day 3.0 , 2 times a week feeding: no more Nitrogen i feed them 2 times this week with this order : day 1 : i feed them high with Bio-Bizz Top-Max + Feeding Booster about 850 ppm - 1.7 e.c to cause a medium e.c stress. day 3 : no more feeding this day day 5 : i feed them very high dose of Bio-Bizz Top-Max + Feeding Booster around 1500 ppm - 3 e.c to cause high e.c stress guide of the week : be patient in the last weeks, never hurry for harvest because its the time of ripening in last 2 weeks you should let plants to do their work last weeks of ripening is the time to break the limits we should cause 3 stresses as i said above Nitrogen stress , Drought Stress , E.C Stress

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

22 days since they sprouted. Got a full feeding today. They are looking great. Good color to the leaves. One is a bit taller than the other one is 8" and the other 7" (the one that came up 18 hours after the first) Will start to LST this week and maybe a slight defoliation, just to open them up to a bit more light. Longest branches are 4", maybe a bit more. Mar. 1st, 2019 - Just coming to the end of week 4. The plants are 26 days old. looking great. They got a watering with Azos and Mykos. Started to LST and just slight defoliation. They are about 10 to 11 inches tall now and growing pretty fast. They are also early flower, they go a last foliar spray today as well. Damn nice plants.

First time grower, criticism will be well recieved😀 Two plant ebb and flow setup in a 3x3 as a test run Top feeding until I can afford the rest of my setup🙄 Started seed in water balanced to 6.0 Sat. Feb. 29th Tap roots within 12 hours, directly into pre soaked rockwool cubes. Broke the surface march 3rd. Began 1/4 strength micro, grow, bloom and stress relief Using very hard water for the next couple days, roughly 450 PM out of the tap. Ro system to be installed march 6th Ro system now installed. Start of week 1 will be Saturday the 7th of March. Day 2: Turned the light down to roughly 50%, instead of raising it, due to the fear of light burn. Will look into it soon. Plants seem to have recovered after I decreased the light intensity. Fan and filter purchased. Alternating flush and feed cycles 12 hours apart to keep salt sats down. Day 3: Bumped light intensity back up to roughly 75% of the ts1000's capability or 700 "light units" from a cheapy 3way meter. Adding as much co2 as I can through baking soda and dilute phosphoric acid. Day 4: Exhaust fan with climate control installed March 10th Day 5: Girls exploded now that I have my salt build up figured out . Day 6: Light back up to 100% Day 7:little droopy on the one plant, gonna let them dry out a day Setup should be complete for start of week 2.(actually sick right now and having trouble getting supplies) Still need a flood table setup.

New week in supported marshydro grow FLOWERING TIME last run i did it under a TS-1000 But this time it will be under the amazing FC-4800 i am so excited to boost up everything and see what i can approve from last run 🤘🏻🤘🏻 Starting to put them in 12/12 schedule they have bin put in darkness for 12 hours and now hopefully let the flowering Begin fucking love this stage 🤘🏻😎🤘🏻 27/10/21 All plants Transplanted in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Have some ideas for my grow tent I have my plants on hard plastic pallet And i ordered plateau with ball bearing So i can turn my plants around with one spin 😎 basically a huge turntable wikiwki Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Hi everyone. I'm using the Ikea wardrobe as a grow box, paid 15 Euro, I covered it with reflective material, paid 8 euros. I'm using a 125 Watt CFL lamp, paid 35 Euro, in the flowering phase I will add some LEDs to improve the results. I'm not an expert, this is my first time growing, but she looks very healthy and happy also with cheap materials :) If you have any suggestions I will be very happy.

Intentando mantenerla baja con lst para controlar la altura.. Quizá una poda apical...? Sería ya xq empiezo con la Floracion. EC 0.9 Ph 6.0

Fattening up. Smelling super fruity and swinging. Added support to the bigger branches. Over the past 3 weeks the flowers have just fattened up and keep getting bigger!

Nice big buds. At week 6 of flower I’m gonna stop feeding nutrients now just water from now

******** Week 8 - Jan 27 to Feb 2/20 (Days 50 - 56 from seed popping out) She has continued to swell this week and stacking her buds. The hairs have remained a nice bright white all week pointing up. Noticing some curling a bit of the hairs towards end of the week. They are white but there is a small red hair here and there now. Giving her a couple more days of feed no idea about flush. She has been slow going all along in her growth........at this stage I want that to continue......drag out her swelling/bud growing stage😋😋 On the down side.....I did see very small red hairs here and there.....unfortunately. Heavier leaf strip on Wednesday and have continued through out as rotating her in the tent under the light. Took off probably 25%. Took off a few more of those fan leaves down low that I when removing bud sites. She is long and lanky so don’t feel side lighting is much of an issue. She is dark in my opinion and hope she will continue to feed and work through all that nitrogen. I didn’t realize how many purple streaks she has on some stocks. She was also given a feeding this week with Epsom Salts. A lot of red on one of the the other plants so worked Magnesium Sulphate in that way. I think I could have gone harder on the CalMag earlier and/or introduced epsom salt earlier as well. Changed the light schedule this week. Moved her to 19 hours of light because she is not falling to sleep at lights out. I know that I could have the lights closer but given how Skywalker has grown I can’t lower them as much as I would like. Will try compensating with longer daylight period.😉 Worth a try! Have seen other Mephisto comments where they say run 24hrs......not my style though. Will keep up Liquid Weight and Rezin to the end and see how she is as a result. Not used these supplements before. Not sure if I will use AN Flawless Finish this run or not? Little more detail: Jan 27/20 - Day 50 - Feed: 2L - Sensyzime @ 2ml, Liquid Weight @ 1.5ml = 45ppm 6.0pH - plain water. She is showing brown spots on leaves. High Potassium?? Lots with supplimentals. Jan 28/20 - Day 51 - 2L: Rezin @ 2ml, CalMag & LW8 @ 1.5ml = 360ppm. Left a lower pH this feed. - Used heavier CalMag today as purple stems is increasing.....looking at using Epsom Salts. - striped some leaves today...heavier than normal.......think it was 5 😄 Jan 29/20 - Day 52 - full feed today as listed above. - 5L - 1125ppm with 6.2pH....low pH trying to raise it by lots of run off with 5L. - runoff: 950ppm with 5.6pH - There is a lot of branch on this girl.....continued the leaf strip though and took more today. - Evening - 2L plain water 6.4pH............figured if I am going to over water her I may as well try and raise the pH more. *******this should have been about 12 litres of water given the way I was going about it.......or let the pot dry out completely first. Jan 30/20 - Day 53 - 2L feed: Epsom Salt @ 1tsp/G, Rezin & LW8 @ 1.5ml, Dual Fuel A and B @ 1ml = 1000ppm 6.15pH - used Epsom Salt today. - They were very happy today in the morning. Swelling up. - They are not falling to sleep at night so moving to 19 hours light. First day. Jan 31/20 - Day 54 - Feed: 2L - Sensyzime @ 2ml/L - 30ppm 6.15pH - plain water feed today. Sensyzime to clean up the roots. - She keeps chugging along with growth and packing on some growth now. Looking awesome actually!! - She reacted well to Epsom Salts......or didn’t negatively react - Colas forming larger and longer. Feb 1/20 - Day 55 - dry out day. Nothing at all today. Pots felt heavy all day - She is very happy in evening. All leaves up on almost all buds....very nice! Filling in cola too! FROST on fan leafs......may have to press her fan leaves:) Feb 2/20 - Day 56 - pot nice and dry today. She was happy this morning and given a large feed. - 4L of full strength for the week. - run off 1080ppm and 5.85pH......Hmmmm, I like it:) - Pots were really light in AM. - See very little red hairs. Still mainly nice straight shinny white.....keep going girl.....no rush! Looking forward to bringing this girl to the end and watching her swell......fingers crossed😁 Hope your garden is making your smile fellow growers....cheers!

As you can see she’s going bonkers! The purple colors and hues comes off in the aroma also. She’s a spectacular cultivar. I can’t wait to grow this one again! Check back next week to see just how fast she buds I think we may have one more week in store! Only time will tell. Remember it’s 4:20 somewhere

Rainy days but she is doing great aswel as the rest of my garden i have been learning a lot this year and hope to continue ☺️

15 Day dry then trimmed using the Trim Bin. Curing with Grove bags, first harvest filled 3, 1/4lb grove bags. *Updating with clone pictures of this pheno in late flower labeled in diary as you look through, If I pop a new seed of this strain Ill start another diary

2018-04-03 Week 14 Day 1 Not much to say, there isn't much drama going on in growroom 2, the only things I do is giving them water and nutes 2 - 3 times/week and making sure that the lamp don't burn the girls. I gave them 4 liters today, and since they live in smartpots I can see when the pot gets wet when watering the girls, but you could hardly notice that. They are getting thirsty 😛 The flowers are developing very good, they look really healthy and their colors are fine. Power Plant XL nr 1 is 67 cm Power Plant XL nr 2 is 66 cm 2018-04-04 Raised the lamp to it’s highest level and turned all girls 1/4 turn, it’s really hard to get in to the ladies in the back, I need to push the girls up against the walls on each side and crawl on the floor to be able to turn them and give them water/nutes. Damn these plants, why do they have to grow and become so BIG?! 😆💪 Added a new video, enjoy my SoG 😄 ------------------------------------------------------------------------------------------------------------------------------------ Strain information Genetics for the famous Power Plant were captured by a group of Dutch growers on a trip to South Africa, back in the 90’s. They managed to breed a strain that was soon a popular choice in coffee shops of the Netherlands, most likely due to the soaring and intense Sativa high. Zambeza Seeds thought that the productiveness of Power Plant should never be forgotten and created an updated version, to bring the legend back to live. Power Plant XL yields up to 600-750g/m² in a flowering period of approximately 55 days! The efficiency and productiveness of Power Plant XL fears no comparison with many recently bred cannabis strains. Indoor heights of 80-110cm make this sativa-dominant variety relatively easy to grow, but outdoor growers need to be aware of the power that is being released under the sun. Outdoor plants can easily reach heights of 150-200cm, and yields of 500-600g per plant. The taste of Power Plant XL can be described as a delightful blend of sweet and sour flavours, with subtle hints of pine tree in the background. Smokers who appreciate a very strong and uplifting Sativa high will be more than satisfied with the effects. One will experience feelings of euphoria that are definitely intense and uplifting, typical for a South African Sativa like this. The up-high can also evolve into being more relaxed, especially when larger quantities are being consumed. Some people suspect Power Plant to be grown in large commercial operations around the world. It doesn’t really matter if these assumptions are the truth or myths, but Zambeza’s breeders are very proud to bring this highly productive legend back to live. The updated version of it, Power Plant XL, is the most efficient Dutch "bud factory" money can buy. ---------------------------------------------------------------------------------------------

It looks great!

Be flipping to flower very soon

Bonjour à tous, Le 8 septembre jour 50 pour mes 10 White Window. La semaine dernière c'est bien passé et les branches secondaires sont en train de se développer, cool. Je ne change rien pour l'instant et je déclencherait la floraison quand il y aura de bonnes branches secondaires. Voilà c'est tout pour l'instant mes amis. Merci d'être passé me voir, laissez moi un like si le coeur vous en dit. Peace and Grow for All..🌿

This week was really great except for some weather problem, cold is came a little bit earlier and i m still fixing something in the grow box. Roots are really large and strenght. Flowering started exactly in the 28 day. Let's go!

Woop happy with how the grow is coming along had fun trimming the girls down shitting myself at the same time though😝 still on an 18/6 schedule as I didn’t want to over stress the plants following defoliation and scrog . Scrog setting up wasn’t too bad hope I done it right 😅 the screen is slowly becoming very green haha .. I’ll keep looking around on the web to widen my knowledge but for now it seems all is good my plan is to switch to 12/12 starting week 6 and around this time I should look into adding bloom to feed the autos as I’m sure they’re in pre flower stage right now but if ever in doubt I shall ask Some cool photos to look at as well Happy growing ☠️

Day 126. Girls are thursty !!!! But it's a trend of all of all summer, I don't want to invest any time except documentation of process. They miss feed a bit too, but soil is dry and I will postpone last feed till I am back from holidays.... No updates next week, let's see colas then !!!! Happy Growing !!!