Likes
Comments
Share
@3lementa1
Follow
I changed the reservoir and set the pH to around 5.3 and reduced the nutrients by 5ml/g. I just realized I've been adding far far fewer nutrients than I thought. I've been using 30ml in a 5 gal bucket (probably 4.5g volume) but I should be using 30ml/g so 4x as much. I'm going to leave it for now but I should probably start adding more nutrients. I took the wires I was using for LST off the bucket so it isn't stressed during flower and so it's easier to change the water. I'm taking off fan leaves that are blocking bud sites if I can't tuck them away. It grew a crazy amount today, so many little pistils came out. It's an exciting time. July 10 she thirsty. I added half a gallon of water and a full 30ml of each nutrient. That should bring us close to half the recommended nutes. I'll probably change the full res out and give 3/4 nutes sometime this week and go up to full strength next weekend if everything looks OK. https://www.remonutrients.com/calculator/ I just looked at my chart again and I think I was right the first time. I just added more nutrients for no reason. I added another half gallon of water and checked ppm and pH. Ppm is 1050, pH is 5.8. Gonna keep an eye on it through the day and see what happens. 305pm pH 5.8 ppm 1200 July 11 pH 5.8 ppm 1300. I'll add some plain water after the res goes down a bit more. Looks like the plant isn't using all the available nutes and is probably leaching some. She looks good though. Loads of vertical growth over the past week, now really going hard making bud sites. I'm going to see how this nute situation goes before doing any major defoliation or pruning. Leaf temp was 29 on the central cola so I turned up the fans and raised the light a bit. July 12 ppm down to 1200, pH still 5.8. Looks like it's going to be ok. July 13 ppm 1300 pH 6.2. I dropped an entire oscillating fan on my plant today. I broke 4 stems almost clean off. 3 appear to be surviving through duct tape and wire. The biggest one appears to be a casualty. I'm pissed. But the cabinet is coming together. Once it's perfect this kind of thing won't happen. I salvaged a piece of plywood yesterday and hand sawed the whole thing to fit as a door.
Processing
Likes
1
Share
@Lifted
Follow
I did a heavy defoliation last week,so majority of this week was about getting my plant back to a healthy phase. I did alot more LST as you can tell in the video to start more of an even canopy. I also raised my light by 4 inches to provide a little more stretch in each branch so I'd be able to manipulate it more with LST next week.
Likes
5
Share
@CalGonJim
Follow
1/27 2am Monday 👍👍👍🤩🤩 1/28 3am 1/30 flipping to flower soon added more dirt, trimmed up a bit. 2/1 3am SUNDAY. I did NOT expect the extra plant so I will cut it to 4 colas. Taking cuttings today!!!! I dont need the extra plants but Im going to experiment with cuttings and cloning today!!!! gReatest day of my life. 830am got the plants all cleaned up ready to flower!!!!! I dont have space for the cuttings so Im throwing away an infinite amount of plants....booooooo 1230pm Ready to flip to flower 🌺 Monday!!!!!! I started the 12/12 tonight!!!!! 2/2 4pm SUNDAY.
Likes
11
Share
Processing
Likes
22
Share
He tenido unos problemas esta semana. Una de las plantas no tiene orden jajaja. Al parecer sus ramas no están muy fuertes y se caen. Acá es donde me arrepiento de no haber usado scrog. Otras dos plantas están presentando un poco de amarillo en las puntas de las hojas y una que otra un poco quemado justo en la punta color amarilla. Por lo demás las veo bien, se hicieron un poco más gordas, pero no lo suficiente o lo que quisiera. Necesito incorporar co2 y scrog en el próximo cultivo. Espero resolver mis problemas y mejorarlas para la otra semana. Buenos humos
Likes
10
Share
@L1lium
Follow
Es ist soweit! Am Freitag habe ich die fünf Easy Buds nach knapp 11 1/2 Wochen abgeschnitten und geerntet. Leider musste ich feststellen, dass eine Pflanze ziemlich stark befallen war. Ich vermute eine Milbenart oder möglicherweise Fliegeneier. Unterhalb der Blätter waren etliche dunkelgelbe und dunkelbraune Eier, die man auf den ersten Blick kaum erkennen konnte. Bei genauerem Hinsehen sieht man jedoch, dass sich der Befall auf die ganze Pflanze ausgeweitet hatte. Glücklicherweise blieben die vier anderen Pflanzen verschont. Aus diesem Grund trockne ich die Pflanzen auch getrennt voneinander. Die befallene Pflanze wollte ich nicht direkt wegwerfen, sondern erstmal trocknen lassen. Im Nachhinein werde ich schauen, wie ich mögliche Schadensbegrenzung betreiben kann. Die vier gesunden Pflanzen werden in einem geschlossenen Zelt in einem Trocknungsbeutel getrocknet. Die befallene Pflanze habe ich in dem Folienzelt aufgehängt und mit einer Plane abgedeckt. Nach wenigen Tagen der Trocknung sieht soweit eigentlich alles gut aus. Die Eier scheinen nicht mehr zu schlüpfen, sondern fallen von der Blüte ab oder verschrumpeln zu Kompost. Ich hoffe, dass es dabei bleibt. Der Geruch hat sich nach dem Abschneiden deutlich verändert. Schon nach der kurzen Trocknungszeit kann ich einen intensiveren Geruch feststellen, der sich noch nicht so richtig beschreiben lässt. Die Blüten waren stark mit den sogenannten "Sugar Leaves" verwachsen, weshalb ich sie grob getrimmt habe, um sie zum Trocknen aufzuhängen. Nachdem die Blüten vollständig getrocknet sind, werde ich die Buds noch einmal einzeln trimmen und durch meine Trimm-Maschine von Vevor jagen. Der Ernteprozess hat zu zweit circa eine Stunde gedauert. Die Pflanzen waren zum Zeitpunkt der Ernte noch sehr gesund und kräftig. Die Verwurzelung war trotz des geschlossenen Topfes sehr gut. Die schönste Bud hat definitiv die zentrale Pflanze, Greta, ergeben. Nass hätte ich den Bud auf mindestens 12 g geschätzt. Ein Gesamtgewicht des nassen Pflanzenmaterials habe ich nicht ermittelt. Sobald alles trocken und fertig beschnitten ist, werde ich das Tagebuch um den trockenen Betrag ergänzen. Stand jetzt würde ich schätzen, dass der Ertrag aller Pflanzen bei circa 40-50 g liegt, was mich für meinen ersten Grow ziemlich zufrieden stellt, besonders in Anbetracht dieser wirklich sehr simplen Strain. Mehr Infos und Fotos folgen in Kürze, wenn das Curing beginnt. Bis bald! :)
Likes
27
Share
I’m overjoyed with the phenos this strain is producing, strong vibrant purples with some serious flavour profiles! Scent Profiles we have: Candy Lemon Sherbet 🍬🍋 Sweet & Piney Diesel 🍭🌲⛽️ Sweet & Tangy Tropical Punch 🏝️🥊 Alongside this, these beauties are the frostiest and the most insanely dense koala looking nugs I’ve ever produced!
Likes
39
Share
@Festerus
Follow
Big week! Put the net up and really have been defoliating and training to bush her out! So far she responds amazingly well to the training, growing inches a day curving back towards the light! :) She’s really up taking water now, 2 gallons a feed with barely any runoff now, and she’s nearly dry by the end of day 2, so she’s thirsty! Very excited to even the canopy out and switch the lights :) a couple weeks left! I took 10 cuttings this week as well to try my hand at cloning, so far they are doing alright, at the time of posting they are 5 days cut. Strain is supposed to be ~65 day flower, so half done!
Likes
8
Share
I’m so proud of the transition. I gave them a defoliation during and it didn’t slow them down! They’ve shot their worst pistols now so I’m so glad to be officially in bloom!
Likes
17
Share
@Dunk_Junk
Follow
Grown 9cm taller this week. Got a lot bushier too!
Likes
39
Share
Hey Farmers, I hope the clones don't clutter the diary, or confuse you guys, wanted to show the progress and have some fun with a clone. One of them is now in a micro DWC setup, a reservoir of less than a litre she will be flipped pretty soon, to keep her compact. Now for the main plant, she's so incredibly bushy, I'm not going to veg much longer, in fact I might flip next week. She's very indica like in nature, very strange for tangie, Dutch passion notified me this seed batch stretches less, here's hoping i still get some sativa stretch.
Likes
18
Share
F29 beginning of 4th week of flowering SD3 - initially sweet orange then engine grease SD2 - initially sharp vaseline then engine grease mixed with kerosine.I personally like SD2 more. Even with the stunted growth. SD3 is getting yellow from the bottom and i dont know what to do. I had thrips so i sprinkled diatomaceus earth on top of the soil and rubbed some on the fan leaves and stems. Sorry for the reddish pics
Likes
16
Share
@Mrg7667
Follow
Noticed what looks like to me a little nitrogen deficiency so started feeding biogrow at 2ml 2nd week with the new lights and they seem to enjoying it although space is getting very tight in my closet! Going to need to migrate to tent sooner then later
Likes
6
Share
@Lazuli
Follow
i didnt like how my plants grew so tall
Likes
15
Share
@Sid93
Follow
the plant keeps swelling at a slow pace. looks bigger every day and smells stronger
Likes
13
Share
@Everest
Follow
This week I went back to measuring the ph and found out that the water I was using had a ph above 7.5 so I corrected the ph of the soil with a more acidic solution of ph 6 with algae mic.
Likes
Comments
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme
Likes
6
Share
The week has passed really awesome, a big height growth, thats is bad in my case, but will see to what it gonna lead, last very hard defoliation has been done as well, cheers! ;)
Likes
7
Share
@Stifler
Follow
I changed the lamps to 100w full spectrum 💪😍
Likes
4
Share
@QixxGrows
Follow
Using 2 seeds in a luke warm water shotglass. Placing in cupboard to germinate. Day1: Nothing yet Day2: One of the seeds started to sprout. Showing it's sexy little tail. I'll monitor the growth in the next 24hrs and then decide whether she's ready for the sproutling pot or not. Day3: Tails were looking pretty good - forgot to take a photo :/ roughly 1cm for one of them, which is the one that I decided to plant. It really hurt when I chucked the other seed, but I really only need one plant. Soil mix for the sproutling: Coco Coir - 70%, Vermiculite - 15%, Perlite - 15%. I also added Greenhouse Feeding "BioGrow" and Mycorrhiza. The picture was taken from my RPi + Cam setup that will be taking 2 photos/min. I'll post the timelapse at the end of the day. Day4: Running the whole day in the tent with ventilation running minimally. Light only at 20%. No action, so I deleted all the pictures except for the last one taken before the lights went out. Day5: No activity above the soil level. Probably spent the whole day focusing on root growth. Day6: At around 09:20 I watered again and with this uncovered the first signs of life! The rest of the day was mostly uneventful - until the evening. Roughly 2hrs before lights-out she started to move. Day7: Things starting to look really good :)