10 jour de séchage a 18c et 60% humidité pour conservé les arôme. Vraiment pas le yield au quel je m'attendais mais la qualité est la ! Plante très facile a cultiver et très jolie.ses teinte de pourpre , violette et verte lui donne un look assez unique .La couleur rouge est plus présente et vif depuis qu'elles sont sec Les têtes sécher son un peut flufy et la génétique a tendance a faire des foxtailing durant la pousse . Des arôme un peut raisin un peut bais additionner d'un léger terreux. j'aurai préférer un peut plus moufette mais délicieux tout de même.

Transplanted into 3 gal fabric pots did alittle training aswell

Week 8 Flower Last full week of flush (plus a couple days). She was taken down on Day 58 Flower after she'd faded enough. Most of her fans had died off and been plucked. I always cut them down approx half hour before the light is due to turn on. This is so the chlorophyll production is at its minimum, giving you the best flavour and smoke. She's a stunning girl with fat juicy fruity cola's! 🍇🍓 Thanks for following and happy growing! 🐺

The Blackberry Moonrocks are looking great. They're definitely the healthiest plants in the whole tent. I might have gotten a little carried away with the nutrients, so the leaves are a bit funky right now, but they're still going strong. I'm excited to see how they do in the next few weeks. The new year is off to a frosty start! We've had snow falling for what feels like forever. My kids are loving it, of course. They're building forts, having snowball fights, and turning everything into a winter wonderland. It's been a lot of fun to watch them enjoy it. All this snow is really making me think about how quickly time flies. It feels like just yesterday we were celebrating the holidays, and now here we are knee-deep in winter. I'm looking forward to warmer weather, but for now, I'm enjoying the quiet beauty of fresh snow.

FLOWERING STARTS In the the new marshydro set-up 120x120x200 4'x'4 FC-4800 lamp Pubes are showing on all of them happy days in the absolutely amazing marshydro tent 👌🏻💯👌🏻 and no balls in the room yet so that's good at least i know that first grow i had issues with hight but with my 120x120x200 that not going to be end problem so stretch like ya never stretch before 💪🏻 i am prepared now lol the FC-4800 is a beast and still tweaking hight dimmer don't want to burn them but also want to utilize the lamp as much as I can but will get under control 🤘🏻😎🤘🏻 1/11/21 Did some last defoliation and spread the plants out bit Tru the tent got lamp dialed in dimmer around 55% and hight around 45cm above the plants and every week will bump up the dimmer with 5% they are looking very good healthy and i am very proud of the results so far gave the proper nutrients and the normal watering in between everything cool in the hood Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Getting there

Moving into early flower and stretching out.

We have our color. Now for the buds to become more dense 😁 Edit: Just found out that this is a cross between Queen of the South from Relentless Genetics and Sugar Cane from Inhouse Genetics 🤯🤯🤯🤯

SUCSESS! I now know for a fact that the pollen did its job. I am 2-3 weeks out from pulling the plug on the lights and giving them the axe. looks like some are starting to mature so I will let them cruse on auto pilot for the next 3 week just giving them plain water PH 6.0 this should use up the dry nuites in the coco and work as a flush as well. Some nutrient burn from the last blast feeding, but I can live with it. I think my PPM meter is out of calibration and it gave me a lower reading than what was in the feeding. I'm pretty happy my first pollen chucking experiment worked. This will be a Feminized S1 IBL " inbred line" The original female that was sprayed with the CS never got pollenated. the other 2 were by me 2 branches each, some may have popped in the tent before. I will find out how many buds got knocked up in 3 weeks. The clones will have some buds on them seedless. so that's it for now. I'm in the home stretch in reality July 17th or so should be the finish line including drying time. soooooo close.😍

28/08/2023 I just water them and trim the leaves that are completely yellow. I'll wait a few more days, but this week I'll probably trim all the big leaves to leave only the small ones near the buds. At a certain point during the day, my humidity can drop down to 35%, but typically, I'm around 40%. The smell might seem strong when I open the tent, but it dissipates rather quickly. But what a delight, it smells really good. Still no nutriments

shortest plant is 50cm tallest being 95cm. They are all doing wonderfully, most of autos are budding nicely and all of the photoperiods are ready to flower. looking very promising. i am changing my light schedule to 14-10 to kick these girls into flower.. this will give the plants an extra 17% (or so) a day under the lights.rather than 12-12. i cant be fussy as i only have one grow space but if my research is correct these should grow beautifully! the autos are well ahead so shouldnt affect my harvest weight too much. like i say i cant be fussy! thanks for looking

OK guys I'm back after being away for 2 weeks. I've proceeded to a final transplantation into a 9L AirPot container, right before I left for vacations. Despite the transplantation, no special operation was done, I want to see how this clone is going to grow on its own and I don't have enough room for training / bending. A friend was in charge of the grow room while I was away, and she did a pretty good job. The clone is healthy, standing proud and praying the light. I started to build the manifold for 4 colas but some side branches have already reached the canopy, that clone wants to produce weight! She will remain under vegetative stage for 1~2 weeks before flipping into 12/12 light schedule. I can't wait to see her full of buds! Thanks for stopping by 👊

Foxtail:///

Following the same nutrient plan as the previous week. Nothing out of the expected worth mentioning. Exodus is growing wide and high using the whole surface. 13 March Update: I have been watering everyday the plants were requiring it. Every 2nd day I gave them 1 Liter Water +( Terra Bloom 3ml/L , Sugar Royal 1ml/L), between the feeding days I provided 0,5L of clean water. Nice flowers are popping up everywhere so it’s time to add Green Sensation to the feeding plan. I plan on using 1ml/L every other day.

Night time photos so ladies look a little droopy from being in the light all day. Woot woot Cheers to Ecofarm for Fast and friendly service. Got the grow bars in today and they will added to the tent, they are 90w Led grow lights 4 feet long with Banks of Sanan Epistar Smd 2835 and Osrams. PPFD of 198 @ 18” added to the power already there and we got a heck of a light setup. The lights are of great quality and have a three year warranty. Next big investment will mostly be an Apogee Light Meter, tired of fucking around and playing the Guessing game with “Lux meter” on the cell phone. After we acquire the ppfd meter the next step will be acquiring parts to build our own grow light. Also planning on experimenting with light moving technology next grow so we can avoid some of hot spot issues known to be present with Cobs. Lights lights everywhere lights what the heck is going on here? Well the whole idea is to have a ppfd that is as close as possible to 1000 or higher Par/ppfd at 5 foot by 5 foot. Ladies will burned but yields will be large. No guessing or estimating yet. Taking a wait and see approach. The purple gelato mutant is still showing signs that she may indeed be going into flower. Not overly concerned, just kind of cool thing. So all said and done we will try to run 6 side bar lights. 4 cheaper led bars equaling about 180w with 2 Chinese high quality led that are also equal to about 180w. There is also a 2000w Cob grow light with 4 cobs and a bunch of leds draws about 400 watts. And finally a Parfactworks 500w grow light draws about 150 watts. These are all give or take numbers so really I could be drawing 1000 watts or I could be drawing 800 watts. Not really concerned about the power draws we are after bigger weights. And without investing in a new grow light this was our best course of action. Pleased with how everything is progressing and looks great. So I'm actually kind of not use to plants growing this fast every plant is showing gender now in some way. The mutant is most likely not pushing into flower. But again I'm not use to plant growth this fast... Umm #@$% you Advanced Nutrients I used them for half a year and never really had anything to compare them too. This is a superior product in every single way including Price.. Thank you Green Planet Nutrients for making a fantastic product. SMD 2835 – A cheaper led fairly efficient rated at 2.2umols/j with a 3 year warranty offers good value to performance. Comparable to Lg 5830s and Samsung 301h(b) But not as energy efficient. PPFD - photosynthetic photon flux density A link to a video with Dr. Bruce Bugbee a very respected and valued member of the Cannabis growing community. In the video he explains a lot about light intensity and yields. Seen it first hand and this gentleman does indeed know his stuff. Here's a link: https://youtu.be/ID9rE5JewVg

Good week as we had some nice weather, also provided a small amount of iguana grow and she's looking good, still 1 or 2 weeks to go before flowering, I've also started some LST to see if i can keep her small but with some more side branches, hopefully it works 😅 i never trained auto's so lets see 🙈

Day 39 Die pflanzen stehen in ihrem endgültigen Zelt die seitliche Beleuchtung wird nur 3 stunden täglich angeschaltet Die PurplePunch bekam 2 mal Vegan Phosphor Boost jetzt Wechsel ich zu Biobizz. Bei der QuickOne mach ich das gleiche nur eine Woche später. Die QuickOne geht auch in blühte und streckt sich in die Länge

Hi all, Grow area updates: Nothing major far as area is concerned added Some yoyo’s to the net so it can be raised and lowered easily now. I also noticed I had been following ghp feeding schedule for a recirculating system when mine is drain to waste. Didn’t have in adverse effects on the plants at all actually think they loved it tbh. But I’ll notice the ppm difference on these future updates. I was using way more nutrients then what was needed. Now I get to save money lol. Blue dream auto: Def has the faint smell of flowering cannabis now. The branching power from the mixing blue dream and already branchy plant with the ruderalis is def perfect for a scrog set up when you trying to maximize the your yield off one plant. I had to visit the tent 3 times this week to re tuck her down. Did the last tuck Thursday so what you are seeing from the pics today is three days of growth. Crazy!!!! She sitting at about 900 ppm And that’s with cutting the the grow solution some. Master kush photo: She popped through the net mid this week and hit her first tuck under today. With how well she reacted to the femm job. I went ahead and topped on the new growth on each branch. Her branch structure is way more sturdy then autos for sure. Leaves are bigger as well. One is the size of my palm lol I have big hands so that’s awesome. She sitting at about 800 ppm and getting less bloom solution. I’d also like to add I appreciate everyone’s advice far as set up and temp control. It was above 100°F the last couple days. And tent never got over 85 and as soon as the hotter part of the day was over we where back in the 70’s. Ima smoke one for y’all! 🤘🏾 Until next time #StayKited