Recommended
Likes
Comments
Share
Welcome to 📅 Day 25 7/29/2021 sorry for the late update I would like to say a few words about Mars Hydro. the TS 1000 is a great light and I love the fact that the power supply is capable of being separated from the light and located outside of the tent to keep the heat down. I also like the fact that you can control the light intensity and daisy chain with another light witch is what I plan on doing.
Likes
65
Share
@Jayvo
Follow
Smell is very strong, fingers are super sticky from the slightest of touches, hoping she starts to pack on the weight for the next few weeks
Likes
24
Share
We are at 21 days from these girls breaking the surface and they are making progress. I noticed at the beginning of the week that they were a little overdosed on nitrogen so I added 2 gallons of tap water to the reservoir and adjusted the ph to 6. They are still looking a little heavy on N but their growth rate is going great so I think it should balance out by the end of next week. I dont plan on doing a water change until I flower them. I left the plants alone most of the week. Tied most of them down to spread them out and defoliated a few lower leaves on day 20. The branches on most of these plants are thick and solid already. They don't budge easily. Bananasicle is looking pretty funky with uneven branch and node growth but we are just going to push forward. Still pumping nutrients and beaming light 24 hours a day. I'm thinking day 28 we will switch them to flower and see if any of these ladies can bring some❄️🔥💨
Likes
7
Share
19.04.24 BT#19 Servus ✌️ liebe Gemeinde Die Ladys entwickeln sich sehr gut 👍🏻 Die Lichtquelle ist jetzt ne Evo 4-80 1.5 mit BT Dimmer Entfernung zur Lampe 50cm eine Temperatur von 26° und ner RLF von 50%. Die White Widow hat sich richtig gestreckt ca. 200% und ihre Triebe sind fast alle auf einer höher bin irgendwann nicht mehr mit gekommen denke sie wird schöne Buds tagen. Die Bubblegum XL ihr Strecken hat sich in Grenzen gehalten aber wir auch was abwerfen🤩 Nährstoffe bekommen Sie wie gehabt alle 3 Tage immer im Wechsel = Wasser, 3 Tage nix dann Nährstoffe ,3 Tage nix ,Wasser und so weiter Dosierung Hesi Blüh Complex 6ml/L , Hesi Booster 2ml/L, Hesi Phosphor Plus steigenden von 0,2ml/L auf 3ml/L , Hesi SuperVit. Danke euch fürs vorbeischauen mögen all eure Lady's Gesund und brächtig Wachsen und euch mit schmackhaften Stuff versorgen 😋
Likes
8
Share
@Kayotic
Follow
Outside *7 inches * Watering every day, sometimes twice *Silica and FloraMicro *Been in the 90's lately * Got a little rain this afternoon Inside * 72° 63%RH * Central air went out yesterday but temps haven't changed yet in the tents *10 inches( bent) * Watering every other day * Retied down *Watered about a half gallon * Fish Plant Food 5-1-1 and CalMag * Took a few lower leaves off
Likes
5
Share
- Ich hab die erste Woche des Biobizz Allmix Düngeschemas gestartet und gebe wie immer erstmal vorsichtige 100%, da meine Erde an sich durch den Kompost recht potent sein sollte. - Außerdem hab ich mit meinem Calmag-Rechner mein Leitungswasser angepasst. Die Werte könnt ihr auf den Bildern sehen. - Den PH-Wert passe ich ebenfalls auf 6,5 an.# - Die Lampe bringt zur Zeit etwa einen PPFD-Wert von 350 - 360 µmol/s/m² bei 18 Stunden Beleuchtungszeit (DLI von 22 - 23 mol/d/m²). Sie wird aber nur eingesetzt bis es warm genug draußen bleibt. Tagsüber stehen sie jetzt schon draußen, sofern es nicht regnet oder stürmt. Die Purple Haze macht sich hervorragend und sie ist ganz vorne mit dabei. Das freut mich wirklich, da ich die immer mal sehen wollte. Ist vermutlich nachvollziehbar. 💪😁👍
Likes
9
Share
Velocità, abbondanza e qualità altissima queste sono le caratteristiche di queste meravigliose varietà ormai in fioritura avanzata. Le temperature ormai sono estive e le piante crescono e fioriscono in maniera spettacolare. Resistono agli afidi e sembrano riempirsi di infiorescenze resinose e fruttate gradualmente. Si vede che ci sta tanta esperienza dietro queste varietà. Sono felice del risultato attuale, in circa tre mesi raccoglierò felicemente. Alcune tipo le Autoultimate sfiorano il metro ed ottanta centimetri di altezza! Il resto delle varietà sono di taglia media e continuano a riempirsi di infiorescenze! Complimenti a tutti vi voglio bene, un abbraccio a tutti!
Likes
5
Share
First week of flower in the bigger tent and on the Autopot xl smart pot system. Trying a new product on this run which is rock resinator which starts on Monday. Will leave these now to grow through out each week till day 20.
Likes
58
Share
@Gisbert
Follow
Die letzte Wachstumswoche ist für Dame angebrochen und die Sonne ist seit 2 Tagen wieder verschwunden. Nächste Woche Mittwoch kommt Sie für 2 Tage ins dunkle um dann geerntet zu werden. Danach lasse ich Sie für 2 Wochen kopfüber trocknen. Schon jetzt bekommt Sie nur noch Wasser. Ich habe auch noch einmal ein paar der verbliebenen Fächerblätter entfernt. Es ist Tag 80 und die Zeit der Ernte rückt immer näher. Ich habe versucht alle Blätter entfernt die keine Trichome tragen. In dieser Woche gab es nur Wasser.
Likes
15
Share
@tokesly
Follow
Only fed twice this week, lots of drying back for the roots to rebound. Really trying to force that dense root ball to develop before flowering. Lots of heavy growth coupled with heavy defoliation and LST for the mainline. Growth looks like its getting back on track!
Likes
48
Share
Hey everyone 😁. Today I start the next aeroponic round 😃. Since the last 3 runs were with my Gelato (Black Pheno) from Zamnesia, this time I will put my Kosher Tangie Kush Phenotype from Amsterdam Genetic in the Growtool 0.8 😃👍. Of course, the Gelato (Black Pheno) will continue to be used 👍. The entire system was cleaned with alcohol and everything checked for functionality :-). I took 6 cuttings from the little Kosher Tangie Kush mother, of which only one remains in the end (the best). As always, the water was mixed with osmosis water. The following was added: Canna Rizotonic: 3.5 ml per l Cannazym: 2.5 ml per l Canna Cal / Mag: approx. 0.2 l per l. Since this time I want to do a ScrOG with a single plant in the Areo system that fills the whole tent :-). similar to the second gelato run where I did the ScrOG with 3 plants 👍. The clones were placed under plastic hoods and sprayed so that they had enough moisture to root. Now they get 10-14 days to root, then we'll see which one is left over :-). I wish you all a lot of fun until the next update. Stay healthy and let it grow 🙏🏻🍀. You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧
Likes
30
Share
@3lementa1
Follow
Starting next Thursday there will be potential new owners touring the property. It's still a bit early but I'm going to flush now and harvest next week. I think we're close enough. The buds are sticky and smell great. These ones aren't really fattening up that much but they look delicious. It would definitely have been nice to have both plants the same size so they could both benefit from the optimal light distance.
Likes
3
Share
Esta semana creció bastante la Jack orange ya tiene bien marcados los nodos y las nuevas ramas, vamos a empezar con podas de bajos y un poco de defolición, cuando las ramas ya esten un poco más grandes vamos a empezar a entrenarla con amarres y cropping!! Vamos a ir viendo las siguientes semanas como vienen!!
Likes
4
Share
Likes
22
Share
Mamma mia sti maledetti Ragnetti Rossi stanno rovinando tutte le foglie... abbiamo introdotto nel box una trentina di coccinelle🐞 che speriamo possano tenere a bada l'infestazione...
Likes
84
Share
@Wastent91
Follow
Eccoci anche qua all ultima settimana di vegetativa, la ragazza procede bene, anche se è la più piccola, sembra che stia tenendo il passo con le altre sorelle, magari è solo la genetica particolarmente piccola e cespugliosa, staremo a vedere, per ora sto andando leggero con i nutrienti, anche la c02 in pastiglie l ho somministrata solo per una settimana, perché non volevo che esplodessero troppo di vigore in vegetativa per non rischiare di avere delle bestie enormi che al conseguente aumento di c02 aumenta anche il metabolismo e devo fertilizzante il doppio per non avere carenze che mi portano in pochi giorni ad avere nevrosi delle foglie, se nn si sta attento e si utilizza la c02 senza avere gli strumenti che accompagnano questo tipo di compito, comunque basta non esagerare e controllare spesso le piante e se si nota una leggera carenza, somministrare del magnesio/potassio in più ad esempio, che è la carenza maggiore che ho notato quando somministra troppa c02 e temperature troppo elevate.. Bene siamo arrivati alla fine di questa settimana! Ringrazio Mars hydro e per l equipaggiamento professionale che mj permette di crescere le mie ragazze in piena salute! Buon 420 a tutti alla prossima! 😸✌️💪😎😽😺👊🌱🌿🌲🧑‍🌾
Likes
23
Share
FBA 2025 turned Frostbanger was a fun grow in many ways. First, my friend gifted me the seed and I grew outside while she grew inside. It was fun to watch the plants grow in different settings and different growing methods. If you have been following me, then you know our weather has been crazy here. We have had lows of 50* and highs of 90*. We had a hail storm and lots and lots of rain. Today, I was. forced to take my Frostbanger down. I found a couple of buds rotting and it is supposed to rain for the next 4 days, so this grow has come to an end. But first, true to Frostbanger's description, "Just keep in mind, this strain’s dank, pungent odor is super strong—meaning a carbon filter is a must to mask the aroma in any grow room and she’ll make her presence known when grown outside" and boy did my backyard smell. Also, just like its name, it is a "trichome-studded beauty." Sticky, sticky, sticky. It also had a nice fruity smell, almost like a cantaloup. I like to wet trim, so I spent the past 2 days trimming. My wet bud weight is 102.19 ounces. Not A big harvest. Had to throw away some bud rot and I had to take this plant down early --But that is how a hail storm, cold weather, hot weather, Rain and more rain will effect a harvest. I'm happy to be somewhat successful. FYI: today's weather: It has rained 2.05 inches in the past 24 hours and expecting 1.6 inches in the next 24 hours.. I am pretty proud of Frostbanger's cola as it is 10 inches long and approximately 9 inches around. Wish I could have seen it with 2 more weeks of growth. I may not have the growing experience of others, but I am super happy with this grow and glad I could enter a contest. It was fun!
Likes
51
Share
@Waveform
Follow
Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …