19.1. - Plants are entering their first week of flowering as the bud sites are clearly visible and pistils are shooting up! 21.1. - Watered 💧 24.1. - Watered 💧 25.1. - Wrap-up of the week: Plants went through another successful week. Lots of bud sites are visible and already developing. I've also spot some first sugar. However, I've also managed to snap the main stem on the Gelato plant, not completely. I've fixed it back, so we'll see but I must have som bad luck as this was second time during this run 🙄 19.1. - 25.1.2024

Started off by setting up the growing environment and dialling everything in such as; RO Water for the RDWC hydroponic system. Water Heater being set at 20 degrees C. Water chiller being set at 21 degrees C. pH being set at 5.7/5.8 Room Temp and humidity 20/23 Degrees C / 60%/80%RH. Instead of using rockwool cubes to place my seeds, I put them directly into the clay pebbles. I then used a DIY humidity dome to place over the seeds until they make an appearance. I have been top feeding RO water every 6 hours. Foil was used to cover the net pot to ensure no light leaks were going into the system. Highly important in DWC. Will add some light nutrients once seeds are more established. Until the next one!

After 93 Days the Peanut Butter Breath get Harvested and hang in a Tent with 19 degrees and 60-65% air humidity. Buds are big as Fuck and have a fruity Smell last step waiting

Topped this girl this week. Growing pretty good so far. I’ll be potting up to 3 gal pots next week sometime. I also have a Bison Brew that I’ll be using sometime after transplant.

Topped this girl this week. Growing pretty good so far. I’ll be potting up to 3 gal pots next week sometime. I also have a Bison Brew that I’ll be using sometime after transplant.

Topped this girl this week. Growing pretty good so far. I’ll be potting up to 3 gal pots next week sometime. I also have a Bison Brew that I’ll be using sometime after transplant.

Topped this girl this week. Growing pretty good so far. I’ll be potting up to 3 gal pots next week sometime. I also have a Bison Brew that I’ll be using sometime after transplant.

Topped this girl this week. Growing pretty good so far. I’ll be potting up to 3 gal pots next week sometime. I also have a Bison Brew that I’ll be using sometime after transplant.

Topped this girl this week. Growing pretty good so far. I’ll be potting up to 3 gal pots next week sometime. I also have a Bison Brew that I’ll be using sometime after transplant.

Topped this girl this week. Growing pretty good so far. I’ll be potting up to 3 gal pots next week sometime. I also have a Bison Brew that I’ll be using sometime after transplant.

Topped this girl this week. Growing pretty good so far. I’ll be potting up to 3 gal pots next week sometime. I also have a Bison Brew that I’ll be using sometime after transplant.

It’s grow time 😂😂 I always wanted to say that but I’m excited

It’s go time 💪🏾💪🏾

I thought I wasn’t going to use the net trellis but it is a must and it help me eliminate everything below. Some may say I cut off a lot of yield but I’m okay leaving out the pop corn buds and just keep the top colas or those that praying to the light

Dear Me, I had a Growers Nightmare, An Equipment failure around 21th of Jan,24. My 3X3 Mars Hydro Kit is IMPORTED from United States. it comes with a pretty powerful grow light FC-E3000. But Unfortunately it broke only after 1 weeks of usage. The Rotating knob stopped responding to dimming function. The push button only turns lights OFF/ON. And without having the ability to control the Light intensity I was left with nothing but 100% light, 400+ PPFD and 25+ degree Temp in my Grow Tent. Hence I Disconnected the Two of the Centre Light bars and Increased the Height to maximum at about 1.3 Feet from plants. This at times was showing between 230-300 PPFD but it now it's back at showing 400 here and there. At the very least the tent temperature is 23-24. I Contacted Mars Hydro notified that I'm in different Country and that I'm helpless and I can't basically send you the Unit for a replacement since I'd killing my plants at that point so please either 1) sell me a new controller stand alone unit to my country. I'll pay upfront. or 2) send me new unit and I'll send back as soon as fresh unit arrives and I swap the malfunction unit. I'll bear shipping cost upfront for both ways. But it's been like 3-4 days no conclusion we're still figuring out and yet to get to any conclusion. Hence I ended up placing order for a AC infinity 6 inch exhaust fan which comes with AC infinity 69 Pro controller( a separate unit that can connect to Mars hydro Grow Lights using RJ45 Cable Type B Connecter). It's cool how just one thing can add a whole Semi-Automation to Grow Tent Environment. Not gonna lie I did thought at this point that I had in fact made my tent buying decision in a jiffy without looking at all the other options. I hope Mars Hydro Fixes it provided that I had invested my faith in them with my money at around 1200 usd( Tent cost about 600 USD + about 600 in Shipping and import fee). Prepared Cal-Mag Buffered Coco-Perlite Mix for Coming week. Plants are already on a Light Feed Schedule with a 3 Part series by General Hydroponics. 1st Week Nutrients Diet Per Gal Water 2ml CalMag 1 ml micro 1 ml Grow 0.5 ml Bloom Ph-6.1 TDS - 277 UPDATE : 4 February : - I learned First week starts "After" the Cotyledons when first true leaves show up. Which means I've been actually in my first week only. Putting an end to my anxiety over my current plant sizes. Also, Mars Hydro replied with a humble gesture and decided to replace the dimmer at no Additional cost, They told me I could keep the faulty unit which means I don't need to spend money on returning it. and they're directly shipping to my country without any extra fee (a cherry on top). I'm yet to get the tracking but it should arrive at the very least sometime before I hit the Flowering. My first week plants look somewhat healthy despite a little light stress in the early stage. Although the Plants heights not been upto the desirable min. so far which is mostly because light was throwing too much ppfd in the early stages. Stay Tuned as i complete the week 2 on 10th of feb for these Baby Auto's.

Flowering Week 6 91 Octane - she is fully in flowering week 6, her smell so strong and sticky buds are forming bigger and still working in her flowering process.Let’s see in 100 watt how much bigger buds she can flower. Banana Daddy - her flowering is in week 4, so I’m not satisfied cuz in my vision her buds are a little smaller than 91 Octane. Actually it’s in week 4 what r u expecting so much LoL so I’m hoping her buds to become bigger. Sugar Cane - Actually she is in week 2, her flowers are starting to form bud shape and trichome are appearing.

-

Set 1&2 are out the green house in an outdoor setting but still under light....did some transplanting gonna do the rest in the upcoming week hopefully n maybe take some cuts other than that everything else running smooth Harvest the mother tree at the beginning of the week with would be about 6 weeks....took a few samples n she's hitting to say only dry a few days scent, flavor and effect are on point....still curing her out

Set 1&2 are out the green house in an outdoor setting but still under light....did some transplanting gonna do the rest in the upcoming week hopefully n maybe take some cuts other than that everything else running smooth Harvest the mother tree at the beginning of the week with would be about 6 weeks....took a few samples n she's hitting to say only dry a few days scent, flavor and effect are on point....still curing her out