By continuing to use the website or clicking Accept you consent to our cookies and personal data policy and confirm that you are at least 18 year old. For details please see Privacy Policy and Terms
*Del 28/03 al 04/04
Despues de tenerlos 3 días en los vasitos, para acabar de enrraizar, seleccioné los mejores 15 de 19 que tenía y el día 28 de Marzo 2021 transplanté a maceta definitiva de plástico negra cuadrada 7L.
70% de Sustrato Janeco Light Mix mezclado con 30% Coco Hidratado, sin llenar del todo las macetas ya que añadiré más tarde, no he regado nada ya que la humedad de la tierra y el coco ya había bastante.
En cuanto a la luz los 1os 5 días estuvieron con el caril electrificado con 3 buenos LedCob de 30w c/u y el panel chino de 60w con diodos rojos, azules y blancos, de momento sólo con el switch del veg.
El mismo 5º día le añadí la campana LedUfo200w 5500kelvin, hoy al 6ºdía la tuve que sacar por el calor, le puse dos LedCob de los chinos más, en los extremos de refuerzo instead de la campana. mañana pasaré update de fotos.
Estoy a la espera de en 2 semanas máximo poder instalar un LumatekAttis300w
* Del 04/04 al 11/04
Buenas!
En cuanto a las luces, he sacado la campana y saqué también los 2 Led Cob Chinos por temperatura estoy muy preocupado con la falta de luz tanto en intensidad cómo en calidad lo único que he dejado es los dosSwitch en On tanto veg como bloom del panel y a ver si esta semana k viene me pillo el lumatek 300w Attis.
05/04:
Algunas ya sueraban los 15 cm y les hice a las más grandes y desenvolupadas, algunas fim y otras apical tamién una ligera defoliación.
He regado al octavo día, 1er riego desde que transplanté sólo agua ph bajo ec baja.
06/04:
Segundo riego de esta semana, el 1o con comida, Rootbastic y Super Vit
También le hice tratamiento con Neem, Jabón Potasico y Propoleo
Just let them grow,,, if they are shoowing agood shape and have established in the new Growpots you can start trining them.
I would say let them grow for 10-14 days , then you may start Training on them
And there is no difference between clones and plants from seed... you trin them the same
Happy growing
*From 11/04 till 18/04
Week 3, 12/04:
i've made some topping technique to all those still that didnt and i will watering today, with only water and less quantity than last, also made some little defoliation on underparts
The taller are at least 20cm.
It suppose to arrive my Lumatek Attis 300w on monday and ill plug it on 12/12h already.
Update! 16/04:
2 days a go finally arrived my new Lumatek Attis 300, i've also started with terravega 15ml x 5L the same day i've plugged the new light. i've put the dimmable intensity at 100% 60cm above the top of taller plants.
Some a them are still little, but the bigger ones are at least 25cm, so next week gonna be 12h schedule. i've made more defoliation before de light time change and after that i'll make lollipoping when the girls gonna be more larger than now
Week from 18/04 - 25/04
12/12 since tonight, today (18/04). (20/04) watering with only water Ph 6/6,5 and 450/500 ppm tds 300ml
Temperature increasing even with the attis 300w, this week i'll buy a co2 enhancer bottle. i've made some more defoliation lower parts from the plant.
They are growing so good, beautiful and strong.
Next watering gonna be with more food.
Hasppy 4/20 to each and everyone!
Week 25/04 - 02/05
26/04:
-Hey everyone! Starting the new week with the 2 last irrigation of vegetation, the first watering from those is made already, next one is the one with only water, and then the last one with food of veg!:) and then flowering aproaching!
-I've made some last shots of defoliation
-Pics are Before and after, and capturing the shape a bit
27/04:
- finally i've made the last watering (yesterday) with distilled water and terra flores, my base nutrients table was for a seeds crop and i was not following it straight on the line since 2 or more cycles ago, so i'll start now with waterings of bloom stimulator and terra flores, then with the weeks Carboload and PK booster.
- With temperature also some little issues, it increases and i'll wait to buy the co2 bottle enhancer till they reach 28ºc, now is 26.5 max. Lets see how goes the upcoming weeks with temperature here in Catalonia, but it seems gonna be warm.
Week from 02/05 to 09/05
last week solved some issues with temp. the intractor was not working proper.
yesterday 02/04 i've watering with bloomstimulator from atami and terraflores canna.
Also seems that i was fucking up with the ph levels, because normally i have to put it down and now with de digital tester it seems to pull down the ph levels when i drop the products.. so now im good
05/05:
've upload some pics without growlights working.
- Yesterday i've pulled down the net so i can move them a little bit and get more profit of the light and light penetration. At the same time 've the expected answer about defoliation and im not doing it any more since last one on 02/05, have to give thanks to @russrahl for the accurate, fast and easy to understand answer 've sent.!
- Also temperature is increasing this week in the city, not more cloudy days, heating increasing and next weekend suppose to be 30ºc more than less... lets see what i do at the end or just turn on the AC or try the option of the CO2...
06/05:
- Fucked up the thing... temp increase here in Barcelona so, 28ºC.. whats gonna be in the real summer then..?
what about defoliation, normally i took off the leafs from lower parts from the plant and also the bigger leafs from upper also, can i do defoliation all what i want? i mean normally i'll stop on the 2nd week on flowering, but im wiling always to more light penetration.
I would only defoliate what you absolutely need to from the top half of your plants. Their are many theories on defoliation, I’ve tried allot of them and found that less is always more. Take those lower fluff sites and leaves from the bottom half off that get no light, but above that keep whatever you can. The game is not to get the light to hit your buds, rather to get the light to hit the leaves surrounding the bud site to create more photosynthesis which in turn makes energy for the buds to grow. So removing all those larger leafs up top will actually hurt your growth. Think of them as solar panels for the plants energy, the more in direct sunlight the better. And after 2 weeks of flower only remove dead/dieing leaves and tuck/bend other larger leaves if they are blocking other lower sites if you must. Personally after the 2 week mark I let nature take over. The plant will naturally shed the leaves that are crowded and not needed, let her tell you what she doesn’t want...lol Cheers 💨
Week from 09/05 till 16/05:
09/05:
- temperature is a bit crazy like a roller coster up and down changing every 2 or 3 days, now is just building the flowers and spotting them on the lant but when the mostly creation of resin moment comes, then im fucked... so next money without fail 've to be for the CO2 Bottle.
- starting 3rd week of flowering and heading the 4th and start with Carboload.
11/05:
Yesterday 've gave them Atazyme, SuperVit and Silica , this silica from cyco did not use it till now, but just ecause i was wondering if this was one of the products that increases my PH levels, and i know our tap water is so hard and with a lot of Minerals, Salty, and Calcium im not meaning is the same components but..., so finally 've put it yesterday and as i thought it explode the PH level, also at the beginning when 've made the Products Table, in principle this silica is for the better assumption of the food by the plant, and also I was trying not to put it and see what happens
Flowering status is starting to be seriously , so 've increased the ph level and EC, wiling to next week start with Carboload and PK
15/05:
- alright then, AC on already, mode eco but working, also 've realized that last time when had fixed the extractor fan had moved also the light and when i plugged again didn't switch it up to 100% power, so 'll start the 4th week of flowering with "super lumen" 😜.
- I will watering them with some only water today , but less quantity
week from 16/05 to 23/05:
17/05:
So finally starting the 4th week! but not than excited as i want, starting this week with some issues: just two leafs, of two different plants, yesterday have appear with bad looking and i think they 've got some too much fertilize.. but not sure so i'll ask on the forum and lets see, by the moment 've gave them a only water watering with a 6.18Ph 640ppmTds.
I will wait and see how goes this following days and see what happens if its a illness , a lack or a exces, so 'll dont change nothing and at the end of the week will give them carboload and Pk booster let see what happens at the end of. the week
18/05:
Alright then! finally after asking here at the forum, and some other mates, it seems probably to be over feed, because the only thing that is on all the plants is the little burn on the tips of the leaves. them a looking super good either this weekend i'll give them carboload but with distilled water.
20/05:
Im a little bit worried about this last days situation with those bad leaves...so talking with my mate from the growshop, will back to less water more waterings, and split carboload and pk in different waterings
not several issues till 1st day of 4th week of flowering appear just two leafs of two different plants look like this:
so i think its a exces but not sure
Could be an over feed the tips are slightly burnt but it is only very very slight. It most probably wont effect growth in anyway I would just carry on doing what your doing the fact you removed them if it was any nasty pathogen it would be long gone with them leaves so I wouldn't worry that much as long as it doesn't spread you'll be fine :) 👊
Week from 23/05 to 30/05:
25/05:
Willing to increase the EC levels have start working with the tap water but i think still have to mixed it with distilled plus the feeding, also after a watering with just water 've put today atazyme and pk, normally i'll use the "Greenhouse" brand booster what is 33/37 pk i think, but don't have it any more and i have another one from atami but is 13/14, not the same potency but pk still
26/06:
some macro shots, 33 days since they are at 12/12 schedule and already a crazy amount of resin.
29/05:
So finally i think have found the issue, seems to be an overfeed of phosphor, so yesterday have gave them just water, 6.1Ph 640tdsppm, Atazyme and Final FLush CLeaner for take out all that exces.
at the same time one good thing is about temperature now is MAx25 Min.20 so like perfect :)
Natural color for the plant to take on as it nears the end of it's life cycle, fall colors as the other person said. You're far enough into flower that it's definitely no issue.
Week from 30/05 to 06/06
30/05:
seems to recovering, try to cleaning that overfeed with only water and atazyme, also it looks even with a proper temperature they are spending the water so quickly, and im giving 300ml every 2 days, them look awesome anyway.
02/06:
Yesterday have gave them again some food Carboload and Pk booster with distilled water, 300ml again.
Last watering with only Bloom Stimulator and Terra flores
Week from 06/06 till 13/06:
07/06:
have started to final flush, i'll give them the few first waterings with 70% distilled water 30% tap water, with atazyme then after only FlawlessFinish and the last just distilled water.
i'll harvest in less than two weeks 😄
08/06:
some shots with the 1€ Macro lens and a 80€ Motorola can't complain... anyway amberness everywhere ! soon harvest!
Week from 13/06 - 20/06:
LAST WEEK!
13/06:
i Have gave them just distilled water, wiling to a proper cleaning, as soon as it dry's i'll cut everything.
16/06:
i have watered last time, wiling to a proper cleaning
Was a little bit challenging for me, due to the outdated nutrients table, mostly on the Flowering period, also little thing like i have to fill more the pots, also with this kind a strain and also with cuts instead of seeds, may be is better to don't do the topping and don't loose time and energy on the vegetative period. At the same time, more or less about the 8th week of flowering it starts to appear something like Alternalia or Overfeed of Phosphor still don't sure. All this issues have impact the grow in terms of the size of the branches and the whole plant, the size of the buds and the hardness.
In strictly terms about the strain, the quality is out of mind, amount of resin is crazy, just have to improve my skills and get bigger crops
NicoKh
