Chat
RecommendedRecommended

GGAF tent 1st grow ever

3
17
6
742
2 years ago
Follow
3
HID/600W
ipower
HID/600W
ipower
Tent
Indoor
Room Type
LST
weeks 2-4
Defoliation
weeks 4
Soil
Grow medium
Grow Conditions
Week 2
Vegetation
15.24
cm
inch
Height
18 hrs
Light Schedule
15+ conditions after
Login
Nutrients
ml/l
ml/gal
tsp/gal
1+ nutrients after
Login
Grow Technique Usage
LST
Technique
Commented by
2ofyn52aUdHza4Y 2ofyn52aUdHza4Y
2 years ago
This week consists of June 11, 2022 thru June 17, 2022 - Seeds were planted on May 27th, 2022 and they all sprouted on May 31st, 2022 (~4 days) Pretty good week with only a pest issue, it was a good week for temperature and humidity, nutrients, watering, and CO2. LIGHTS: I'm running the lights on an 18-6 schedule. I have the dark time scheduled from 11am to 5pm since the lights increase temperature and during that time the outside temperature is at its highest so it seems to be easier to maintain proper temperature ranges with the light off during that period. It was cooler this week with fewer temperature extremes so maintaining a proper temp and VPD was less challenging. WATER: June 14: ~480ml of 6.1 PH and 400 PPM. 1 tsp/gal of Big Bloom 1 tsp/gal of Grow Big 0.25 tsp/gal NPK RAW B-vitamin 5 ml/gal GreenPlanet Root Builder Water was at room temperature. TEMP/HUMIDITY: A max of 84F and a min of 76F with an average of 80.2. VPD was pretty consistently in a tighter range with the average being around 1.1. Whole week numbers> Temp - 80.2F avg - 75.9F min - 85.7F max Humidity - 66.7% avg - 33.0% min - 93% max VPD - 1.17 avg - 0.23 min - 2.53 max CO2: Had a mishap with the regulator on the tank and most all of the CO2 leaked out so I had to refill the tank. After that I tweaked the settings on the regulator and now it is releasing CO2 at a rate 20% of what it was before, floating ball is at 2 now instead of near 10. This lets a more gradual amount of CO2 to enter the tent and I now get a more stable level of CO2 that fluctuates between around 1000 ppm and 1300 ppm. The regulator is still plugged into the same outlet as the lights so it turns off on the same light/dark schedule. PAR: PPFD between 400-600. ISSUES: Starting a few days into last week I did notice some nats in the soil. I didn't take it seriously at first but then a few days later looked into them and how they show up and then made adjustments to get rid of them. I stopped watering for about 5.5 days to fully dry out the top of the soil. I then added a bunch of yellow sticky paper around the pots and sprinkled diatomaceous earth around the top edges of the soil and mixed it in a bit in the top of the soil. This seems to have worked very well and they are all but gone and will likely be fully removed in the next couple days. Next time I plan on adding diatomaceous earth to the soil as an amendment in the ratio of 15 grams per gallon of soil. TECHNIQUES: I implemented LST on the final day of the week. Ideally I would have done some of them earlier but I just didn't have the time this week.
Similar Diaries
Skunk #1 Fem v2
1 weeks
Skunk #1 Fem v2Organic473
Sensi Seeds - Sensi Skunk Fem
6 minutes ago
Super Silver Haze
3 weeks
Super Silver HazeOrganic473
Sensi Seeds - Silver Haze Fem
16 minutes ago · 2 comments
Pro Grow - Autos
24 weeks
Pro Grow - AutosDegenMJ
+3 strains
10 months ago · 5 comments
Gorilla Glue Auto
16 weeks
Gorilla Glue AutoGreenlawnWeeds
MSNL - Gorilla Glue Auto
a year ago · 2 comments
Second Grow: Variety!
24 weeks
Second Grow: Variety!DegenMJ
+3 strains
a year ago · 8 comments
Gorlla Glue
5 weeks
Gorlla GlueFarmerdan0101
MSNL - Gorilla Glue Auto
2 years ago · 3 comments
Gorilla glue auto
6 weeks
Gorilla glue auto Madtater
MSNL - Gorilla Glue Auto
2 years ago · 5 comments
MSNL Autoflowers
7 weeks
MSNL AutoflowersDarkChild666
+1 strain
2 years ago · 14 comments
Grow Questions
2ofyn52aUdHza4Y
2ofyn52aUdHza4Ystarted grow question 2 years ago
I have a tent with a ViparSpectra KS5000 LED lights. If I am growing autoflowers and they are in the flower stage do I have to change the light/dark schedule from 18 on/6 off to 12 on/12 off or will it be ok to keep the lights on a 18/6 schedule since they are autoflowers?
Solved
Setup. Lighting
like
GrowingGrannie
GrowingGrannieanswered grow question 2 years ago
Most people keep autoflowers at 18/6 but in all honesty, they will grow in any light - even 12/12... but they won't perform as well at that lowered light frequency. I only grow autos and when I grow them in a tent, the lights are on 100% 24/7 and they do magnificently. At the moment, I'm growing some indoors AND outdoors... they are outside in the sun during the day and then I bring them in to a tent at night where they get the rest of the 24 hours from artificial lights... UNTIL they get too tall for the tent (which some are now) and then they stay outside 24/7 and get whatever length of sunlight nature provides. Good luck! p.s.... the 12/12 flip that you've probably heard of is for photoperiod plants - flipping their lights to that schedule tricks them into thinking it's time to go into flower.... autoflowers don't need that trick - they do it on their own schedule, light be damned...
2ofyn52aUdHza4Y
2ofyn52aUdHza4Ystarted grow question 2 years ago
Do I have some nutrient deficiency or light burn or maybe both? Looks like maybe P or K? I changed my light to a HPS and the plants grew much closer to the light so could be too much PAR/heat so I raised the light. I also had started to add Cal-Mag to my feed just before.
Solved
Leaves. Edges burnt
Leaves. Tips - Burnt
like
GrowingGrannie
GrowingGrannieanswered grow question 2 years ago
At first, I thought I was going to see a PH that was preventing the plant from absorbing calcium - but your PH is spot on... What I think you're dealing with here is too much nitrogen which can lockout calcium - and she's showing definite signs of a calcium deficiency... so your instinct to add calmag is a good one BUT you've got to cut back on that nitrogen! I use Fox Farm myself and have found GrowBig to be way too strong using it according to their schedule. A couple of things I do: first, I never use more than 1 tsp of Grow Big per gallon - ever. When I first introduce nutes to my autos, I only use 1/4 tsp to a gallon (about week 2 or 3).. the next week, I go to 1/2 tsp and then to 1 tsp which I maintain through pre-flower. When they go into flower, I start knocking GrowBig back... by week 6 (which is where you're at), I completely eliminate GrowBig and instead add Tiger Bloom which has a BIT of nitrogen in it - and it's all they seem to need. So that is what I would advise you to do - stop feeding the Grow Big! Add some Tiger Bloom which will give you more potassium and phosphorus... If you see the problem getting worse (the currently damaged leaves will not recover), then you're going to have to do a hard flush to get rid of the excess nitrogen in the soil (you're growing in 3 gallon pots so that means running 9 gallons of ph'd water through adding 1/2 strength nutes to the last gallon). As for the calmag - only 1 tsp per gallon and ONLY once a week or you'll end up with too much calcium and have another issue to deal with! Good luck!
Comments
Login

Show by Week
Sort by
popularity
popularity
newest
oldest
homerjgangia
homerjgangiaweek 0
Good luck with your grow mate!💪💪
spyder
spyderweek 0
good luck with the grow,,, enjoy.
love_2_grow
love_2_growweek 0
Happy Growing, Buddy! 🌱🌱🌱
LegacyMarketFarm
LegacyMarketFarmweek 0
Hey there friend. Would you be alright with me offering some pointers? So cannabis plants LOVE heat and humidity. It is the buds that hate it. In veg we want to take advantage of this fact to help our plants grow along much quicker and more vigorously. In veg we can look for temps of 79-84 MAX with lights on & no more than 9 degrees less with lights off. If we allow for too much temperature swing between lights on and lights off while the plant is still growing vertically up to day 20 of flower, We will cause the plant to stretch ALOT which we do not want. So in veg & early flower, Keeping our temperature gaps nice and close between lights on and off is key. Utilizing humidity in our rooms during veg will also help out a lot with more rapid growth but we must introduce it properly. In our rooms we have our temperature and humidity set-points, But when we combine those 2 it forms a third set-point which is the most important & that is called VPD, Vapor pressure deficit. I strongly recommend every new grower or old grower who has not learned it yet, To study and understand it & implement it into your room, Logging your numbers daily. https://cerescann.com/importance-of-measuring-vpd/ For soil, We generally want to go for a PH of 6.1 This website does a GREAT job of illustrating it with a nice graph & very good detailed explanation for soil. https://autoflowerseedshop.com/cannabis-ph-chart-guide/ As we briefly touched on before, During veg & early flower we want our temperature gap's nice and tight to avoid stretch. Why exactly our plants stretch in response to this is a genetic trigger being activated by the environmental stress essentially telling the plant the end of the season is closer than it really is. In veg & early flower the plant is still in its first stage of development which is to grow up wide and tall so when it produces seed, It can cast them out nicely. Remember, Whether we are growing our plants for seed or bud their genetic responses do not change as they gh sidedo not know any different. Once the plant has finished that first stage of growth by weeks 4-6 of flower with most strains, It is by day 20 of flower. Autoflowers you have to watch for it, But once the plant has finished this goal its new mission is to focus 100% on producing nice big flower clusters & to get very sticky so it can attract pollen to it successfully. So once that vertical growth is finished, We actually now want to begin to expose our plants to larger temperature swings between lights on and lights off. This will help activate that genetic response and allow us to draw out the most potential from the strain utilizing the plants genetic triggers to environmental stresses at the right times. We can also take this a step further with doing light deprivation in the last 2 weeks using less light to simulate cloud cover. Very cold feed temps on the last flush is very good too. If you do not have them already, Get yourself a good PAR meter & thermal laser temp gun to monitor your plant top temperatures & optimize how much light your plants are getting. We are currently in the middle of producing a very comprehensive tutorial series for everybody to learn from & understand how to grow the highest level craft cannabis all on their own. If this interests you please check out our youtube and subscribe. The first 2 episodes are out the next one is coming in a few days. If you should ever have any questions or need any help, Please feel free to follow my profile and shoot me a DM. I will gladly help you with the pull down & make sure you get the best quality harvest possible as it is the most important step of the entire process. I really think you would benefit from our tutorial series on youtube, Our channel is linked off our main grow diaries profile. We just put up week 3 of plant life care so you got time to subscribe and catch up before the next episode is out! I look forward to seeing you over there and hearing your feedback to better help me shape the tutorials Happy growing friend!
LegacyMarketFarm
LegacyMarketFarm
@2ofyn52aUdHza4Y, Sounds very good man. & yes the wider the gap during the right time of growth is beneficial to what we are trying to do. In veg & early flower pre week 3 we don't want that wide of a gap or we get stretch.
2ofyn52aUdHza4Y
2ofyn52aUdHza4Y
@LegacyMarketFarm, Thanks for taking the time to share this info. I have an AC Infinity filter and fan system with the controller and app and have been tracking all of these metrics and trying to keep them within reasonable ranges so far. I had looked online and thought the range from light to dark was supposed to be 10 degrees and capped at 80F on the high side but that is good to know that I can let the temp get a bit higher during light and not have to cool the temperature down as much during lights off, this will be easier to maintain. VPD has been on average 1.43 and a high of 2.90 so far, was trying to keep it in a range of 0.7-2.5 and will more closely watch the high and low ends. As for soil I tested it after a week and it was low at 5.4 so I watered with distilled water with nutrients at a PH of 7.4 for one day and then have been using PH 6.3 water since. I can lower that to 6.1 moving forward but from what I read the soil PH should be ok as long as I always am watering with the proper PH water moving forward. This VPD guide is great thank you!!!