By continuing to use the website or clicking Accept you consent to our cookies and personal data policy and confirm that you are at least 18 year old. For details please see Privacy Policy and Terms
Today (01.11.2022) they 'opened their eyes' (shell cracked). Babies spended one day in a glass of water with peroxide to moist them, then - peat pallet from RQS (sorry, FB, but they're great).
Now waiting for sprouts to show up from the pallets hole.
UPD: TWO DAYS LATER THEY WERE BORN (03.11.2022)
UPD: 05.11.2022 MY TWO FAST BUDS TWEENS MOVED TO FIRM TEXTILE POTS. Coco coir was buffered with BioBizz CalMag and RQS Mycorrhiza was added. And a small amount of RQS Bat guano (only few grams were left from my previous grow)
Idk why hp of the substrate is above 6.5. Mb some of the soil I bought was slightly rotted. I heard some bad smell from one of soil bags, but it was very thin and came off when all ingredients was put together.
I'll correct soil hp with putting feeding in the future.
Ladies sits under one 100W lamp (one of a three segments). Ventilators are off (except one in the air chennel).
Now I'm waiting for new week begins. Awesome vegetation period starting!
🌞07.11.2022
Today is one week from 'seed cracking'. My girls looks healthy and joy. But ph of substrate rised even more and now it's 7ph. I will water them tomorrow (08.11.2022) with 5.0ph solution to start corrections.
🌞08.11.2022
I turned off middle section of mine 3x100W lamp. Now it's 200W (You can see it on photo). Watered substrate with 5.3ph "TA pro roots" solution. Now soil ph is 6.8. Bought new 3 in 1 sensor for soil. Now I can clearly see when watering time comes.
🌞11.11.2022
I gave them small amount of ph5.2 clean water. Also they was sprayed with 'GHE Protect' solution to produce immune system.
🌞12.11.2022
One more 'GHE Protect' procedure. Also, I turned on all three ventilators, following one good man advise. Now my babies gets more air to produce thicker trunk and healthier leaves.
🌞13.11.2022
'GHE Protect' (three days in a raw) - last time before topping. I made two last photos of this week, tomorrow week 2 starts.
From the every beginning my ph monitors (soil sensors) are showing ~ph7. I drained it with ph 5.2 solution for two times already, but I still have ~ph6.8 - 7 in both of my pots.
Will it hurt my sweet babies? How to make soil ph lower without damage them? Please help me.
The buffered coco is bs. Soon as water hits it. It will rise in pH. The coco is what is holding your pH up likely. You can't treat it like coco with the soil in substrate. All you can do is do what you are with lower pH water. Once you start adding nutrients in a week or two it should start bringing the pH down. Can also switch to 1 of three lights on in vegging vs 2. Light requirements are very low in vegging. Remember to get run off when you start adding nutrients. To avoid salt build up in soil from plant foods. Also good to test this run off for pH and ppm or ec. A water pH tester is needed. Avoid cheap yellow ph tester ones. Will have to monitor it closely. So far looking good
Hi, guys.
I have one more question today:
- My box has three ventilators. One is working in the upper air channel all the time to bring out hot air. Other two staring on my plants.
Should I use all three of them?
Or one is enough till my babies will grow thick to pervent mould?
Hey Growmie,
I would say go ahead and use all three, not only will it help prevent mold and mildew but it should bring in enough air to help strengthen the main stalk.
New week starts!
I will wright updates every day now. Cos I don't want to keep photos on my mobile devise. I'll make new photo of a new day, load it up and delete immediately. Keep it safe, guys.
🌞13.11.2022
I putted some more substrate to cover my flowers to the leaves. It's only 'training' till now.
Also, one of my mini ventilators started to make a creepy noise. I ordered two more cheap mini USB ventilators. I hope they will live longer. That one died after a couple month of work. Sadly...
🌞14.11.2022
Next day morning my ventilator died. I scrued it apart. Then I remembered I have tattoo machine oil in my garage. When I oiled it and turned ON it began to spin like new... Mb I acted stupid buying two new ones, mb not. It's written on the oil tube: 'Oil your tattoo machine every 30 hrs'. So after a few days we'll see. :-)
🌞15.11.2022
The second one plant has a slightly larger second pair of leaves (triple ones). Maybe because it came from her seed one day later. There were a seed peeling problem to both of them and I was forced to help. A difference in germination time was about 8 hrs.
🌞17.11.2022
My ventilator died this evening. Two others I ordered didn't come to me yet. But they should come tomorrow. I don't know will they pass, but it will be better then nothing... 8 hrs difference between growing flowers still noticeable, it's disposed on photos. No feeding for today.
🌞18.11.2022
Today two new air coolers came. They are good quality and power for their's size but too noisy. Not so bad, I say. I installed one of them (it's on photo) and leave the second old one on it's place. It still works and a noise is not so loud. I wunder, why my plants are different by the size. Maybe because one of my old ventilators stopped all the time?
🌞19.11.2022
I watered my girls with 'GHE Pro Roots' and measured drainage today. Input was ph6.0 and outflow - ph6.5. I think we'll be OK in a few weeks. I learned from the grow questions that auto flowers grow better and bigger in pure coco with perlite, but i have mix soil/coco/perlite in my pots. Now I nervous if all will be OK. But my substrate is soft (tapped it with my finger) even when it's watered.
We'll see how it'll go compared to others diaries of the same strain.
Hi, growers!
I want to know, why one of my ladies is bigger, then the other (Germination difference was 8hrs only). Maybe it's because bad working ventilator? One of my two vents was stopping all the time, Today I changed It to the new one.
Seeds do not have identical genes, they are unique individual organic beings.
All seeds grow differently, even though they come from the same parent.
There is no guarantee that 2 seeds from the same packet came from the same plant either.
Breeders may grow hundreds of seed plants to provide enough seeds for a year or more supply in a global market.
There is no guarantee that even the pollen that was used for seed breeding came from only one male plant either.
Differences in growth rates have nothing to do with ventilation or 8 hours in sprouting time, it is just that seeds DO NOT have identical genes and grow to their own individual schedule........only clones have identical genes.
If you learned biology properly, you would understand the principles of "genetic re-combination".........the main reason for differences in seeds.
New week starts!
🌞21.11.2022 light smelling started. I kame home today to smell thin delicious aroma my babies producing. It's good and bad in a same time! I gave them their first real dose of ph6.05 GHE nutrients in a proportions so called: 'First true leaves' and sprayed them with 'GHE SeaWeed' solution.
(Nutrients input was ph6, drainage - ph6.5)
🌞22.11.2022
New photos downloaded.
I sprayed my Bananas with 'GHE Sea weed' once more and moist the upper layer of a substrate with it.
My BPPa#1 is slightly smaller then her sister. She have thinner leaves and lower length. But she producing her brunches faster then BPPa#2. Second plant is thicker and higher and her new side brunches are smaller. Now I wonder who'll be larger in the end of this run.
🌞23.11.2022
No watering, only spraying with 'GHE SeaWeed' solution and moisture the upper substrate layer. My moist sensor for soil showing the beginning of a green sector. So watering will be tomorrow.
🌞24.11.2022
I watered my plants by ph5.9 full pack of fertilisers GHE (amount in a table). Luckily, soil ph starts to fall and today it's somewhere near ph6.8 mark.
My babies are slowing down in the main stem growth, I think it's all because there are a lot of side brunches rising up. When they'll form it well and their leaves will became darker - I'll change nutrients proportions to so called 'Vegitation' and add 'GHE Diamond nectar' + 'GHE Silicate'. Also, tomorrow I'll spray them with 'GHE Protect' solution instead of 'Sea Weed' because they're still on the early stage of veg.
🌞25.11.2022
Today is 'dry' day.
I sprayed my flowers with 'GHE Protect' solution. Nothing new, only one thing: they are awesooooome!
Tomorrow there will be 'SeaWeed' spraying, watering will go on sunday.
UPD: Asked the advice thru the 'Grow questions' option and started LST already - as a result. Today I can't bend them more, because I watered them yesterday - their trunks are full of juices and I'm afraid they'll crack in a half. Tomorrow I will bend them a little more, and the next day after, I hope, they will be lying on their backs like a puppies.
Thank You for Your help, grow mates!💪💪💪
🌞26.11.2022
I sprayed my beautiful girls with 'GHE SeaWeed' solution and moisture the upper layer of substrate with it.
Also, I made LST a little more. Substrate ph still near ph7, but they looks healthy and strong. So I'll go with ph6 solution tomorrow and wait them to produce more roots to regulate their environment.
🌞27.11.2022
Some more LST today and 'Sea Weed' spraying. Girl #2 is lying on it's back already, but BPPa #2 is smaller and her stem is shorter. I can't bend it down till she'll grow a bit more. Now waiting for one more floor to grow.
Week ends.
* Ph in a table is soil ph
So, it is the question: when?
I wanted to train them few times already, but scarring to broke yong trunks always stops me. Maybe I should wait more time to them produce heavy crone?
What do You think about it?
Hey Growmie,
There isn’t an exact age or size to start LST on autos, in theory, you can start as soon as the first true leaves grow, most recommend starting training as soon as your plant can reach the edge of the pot, around 10-15cm or 4 - 6 inches. So technically you can start now, just be gentle and the young plant will be fine.
Today is a watering day for my sweet babies. But I watered them with ph6 solution for two times already and no visible changes in substrate ph. Mb -0.1, -0.2 max.
What solution ph should I use today?
Substrate ph - 6.9
Solution ph - 6.0
Drenage ph - 6.5
I have no time!
Help me.
Siema GROWER,
I would not worry so much on the run of pH because you are growing in 60% Soil 25% Coco Coir 15% Perlite so as the water going through it will change the PH of water so if the pH is in the range of 6-7ph it should be fine but watch on the EC because that will indicate if you have nuts build up
👋Hello, my friend!👋
If You reading this, sign up to my profile, I will be pleased! I download new photos and comments updates every day! It will be nice to walk true this grow of my two Fast Buds 'Banana Purple Punch' auto flowers together! I asking a lot of grow questions and take part in a life of this grow community.
New week starts!
🌞28.11.2022
Today I came home and saw my smaller one showing four stigmas in the upper knot. I was afraid of she already starts flowering, but mates from 'Grow questions' made me kalm, answering that she's just showing her gender. It's too early for flowering and thet's how all autos do. Thank You, my friends, You've saved my nerves (as usual).
I have watered my girls with full pack of GHE nutrients, including 'GHE Diamond nectar' and 'GHE Mineral magic'.
Solution ph: 6.0
Drenage ph: I forgot to drain vater from pot's bottom and after four hours it was gone. So I'll measure it next time.
I've done some more LST and sprayed them with 'GHE SeaWeed'.
🌞29.11.2022
Today I asked one more grow question: 'Why all new brunches on my autu flowers has triple fingerd leaves?'
Mates told me it's a fault of my substrate Ph and I can do some flushing to fix that. I took one on my girls (#1) and made this procedure deeping a whole pot in a bucket with 10 liters of ph5.9 water.
Maybe it's some kind ob a black magic, but it did NOTHING.
Inflow: ph5.9
Outflow: ph6.7
Substrate ph after 3 procedures: 6.9
I gave up.
I'll not doing this to #2 and let them grow in that cursed substrate till the every end.
I made small defoliation after all of this to bouth of my girls. Lowest leaves (first floor) was cut with a brunches growing from it. Also I cuted one fingered leaves of a first week.
Results are on downloaded photos.
🌞30.11.2022
Photos downloaded.
Mb its my mind tricks itself but I noticed #1 starts growing faster after flushing. It was smaller than #2 and now it's almost the same size and even looks thicker. Tomorrow we'll see it more closely and I'll flush #2 if it's true.
I watered #2 with full pack of GHE and sprayed them bough with 'GHE SeeWeed'.
Also my BPPa#2 showed her gender today (stigmas on a upper knot). Yep, we have a girl here!
🌞01.12.2022
It's a 'rest day' today.
Nothing to wright.
(Photos downloaded)
🌞02.12.2022
I made some LST and sprayed my flowers with 'GHE SeaWeed' solution.
Substrate ph rised by ph0.1 and now it ph7. It's critical already, especially when my BPPa#1 starts to show stigmas everywhere - almost in every knot. I think pre-flowering starts soon. She looks soft and wobbly, I think there is a deficit of some elements. But my substrate still wet, and I can't do anything. Tomorrow I'll make them both to bath in ph5.5 nutrients solution - and it's only thing I can imagine to do now.
Relying on the best, waiting for tomorrow.
🌞03.12.2022
Today I watered both of my plants with 'GHE' nutrients (TriPart + Fulvic acid + Roots stimulator + Selicates) and sprayed 'GHE SeaWeed' on the leaves.
Also, I think I finally resolved my cuestion: 'Why ph of substrate don't want to go down?'. I take my water from kitchen crane, it has ~ppm110 and ~ph7.5. But clorine in this regular water slowly makes the reaction with asid I use to low it's ph. And slowly but surely ph of solution rises. I noticed this by making ph5.8 water and waighting 24hrs - ph of solution became 6.7 the next day. My previous grow I used distilled water only and thet's why I didn't know about this problem. It's a pity I made this guess so late. But it's better late then never. From now I will make ~ph5.2 water immediately after watering and it will react till next procedure (2 days). It's ph should rize above 0.9-1.0 by this time and become near ph6.0. I already prepared water for the next feeding - clear, without any nutrients (by now) and ph5.25 on it's start.
Today my solution measurements looks like this:
- Substrate ph before watering: ~7;
- Solution ph: 5.8;
- Solution ppm: 680;
- Solution EC: 1.1;
...
- Substrate ph after watering: ~6.9;
- Drenage ph: 6.7;
- Drenage ppm: 710;
- Drenage EC: 1.03.
🌞04.12.2022
The 'rest day'.
My experinent with water ph was sucssessful. Now I know how to treat usual water to feed my flowers correctly. My next grow will be nearly perfect. And also, it's my first (and last) grow using autoflowers seeds. I don't like a grow process ether a future results.
Regular flowers are what I can grow the best. So I'll stay on a 'photo' side of a force (after this auto grow ends).
Week ends.
Hello, mates!
I'm interested why all new brunches on my yong auto flowers have triple fingered leaves?
When I grew regular plants it wasn't like this. All first pairs of leaves had 5-7 of segments.
It's an issue, or all auto strains act like this?
Please tall me.
No problem.. I’m not here for points - I’m here to displace shitty answers.
If you’re a photo guy - stick with it.
Aside from a SELECT few breeders doing autos right - most just end up mids - and that’s IF you grow them out perfectly..
Just peruse the auto diaries on here. Judge for yourself
My 5th vegetation week starts. How do you think, should I delite large leaves living only small one?
Or it's not necessary cos they are located in a bottom and don't cower yong leaves?
No please do not defoliate it would be a waste. There are only 2 reasons to use defoliation.
The first reason is that leaves are stacked on eachtoher. When this happens than they are blocking the airflow and moist can not escape from the bottom of the leaves causing mold or fungal.
The second reason is that large leaves on the top of the plant block a huge amount of light for the rest of the plant.
These are the only 2 reasons to use defoliation. Any other reason is just damaging the plant and decrease yields.
New week starts!
🌞05.12.2022
This day began with smell rising. I think flowering starts. There's a few pestels in every knot (but not on a top).
Watered my girls with nutrients without 'Roots' stimulator. I should stop to give it a long time ago, I hope it gave no harm.
Soon when the odour will become too intensive I'll turn my filters on. It will be very noizy, that's why I want to do this as late as possible.
🌞06.12.2022
'SeaWeed' spraying today.
I changed distance to lamps. Now it's 40sm. Temperature didn't rise, so it's OK.
Upd: I made some LST on evening. It's a last training for them, I guess.
🌞07.12.2022
Pre-flowering stage started!
I turned on third 100W lamp. Now it's 300W total. Fed my girls with GHE pre-flowering nutrients complect. Sprayed with 'SeaWeed', as usual.
🌞08.12.2022
Today I came home from my job to see both girls increased in their high dramatically, +5cm in 24hrs. Maybe it's because of feeding, maybe lights, maybe auto flowers act like this, I don't know. But I saw larger distance between knots there. I was forced to do one more LST procedure (result is on photo).
Also, I sprayed my 'BPPa's' with 'SeaWeed' (as usual) and moved pots closer to each other to place them in a gaps between three lamps of mine.
I'll feed them tomorrow.
🌞09.12.2022
Today I noticed brown tips on the my babies leaves. #1 has alot of it and #2 kinda few. I considered to water them with 'GHE Clean' solution one time, next time I'll give them half of a nutrients dose.
Smell gets stronger. Tomorrow I'll turn my main ventilator with two carbon filters I have from the previous grow.
🌞10.12.2022
Yesterday I flushed my plants with 'GHE Cleen' solution 2ml/l. Today I do nothing. Tomorrow I'll give them 75% from previous feed formula.
🌞11.12.2022
I putted small amount of sulfur in an upper layer of substrate, ~10g/m².
Watered my plants with 75% from 'pre flowering' GHE recommendation. Sprayed leaves with 'SeaWeed'.
Week ends.
What kind of pathology is it?
It's much more brown tips on the older leaves and on that plant wich I tried to flush to down soil ph.
Other plant looks better but already has a few of them too.
Is that overfeeding?
You've got a couple of problems I can see and one is certainly a bit of overfeeding... I'd get your EC down to 1.2 at the most... But your pH is way too high here as well... that's preventing good absorbtion of potassium ... while the tips MAY indicate nute burn, if the burning/yellowing continues on up the edge of those leaves, you're looking at a potassium deficiency... You can easily add a small dose of PK boost to your nutes in the event that's what this turns into.... but get your EC down... at their age, 1.0-1.2 would be the ideal EC range... and get the pH down to 6.0-6.2...
Good luck!
I can't low my ph no metter what I do. Ewery time I feed my plants I make ph6 solution, but ph sensors still showing ph7. It's already ~10 waterings and no result.
I tried to flush one of my pots (puted it in a bucket with ph5.8 water 3 times for 5 minutes) and still nothing.
Your mix sulphur into the topsoil and water it in, its that easy. a little goes a long way don't want to over do it. Can be found at most garden supply stores.
if you have 4 meters all saying the same thing, then they are prob right, I don't know the models you use or brands so can't comment further on it.
The one I use does require calibration quite a bit and I have solutions that help me get it back into range. a 4.01 a 7.01 and a storage solution.
I think the advice of not worrying to much on PH is good. my first couple of grows I did not use a PH pen at all. Next grow can focus on the composure of your medium for what works best for you.
Like grannie said, anytime you tag someone in the questions part of the website it does not notify the user. there is an inbox function on the site, its in the lower right hand corner, green/white paper airplane button, you can reach out there to other users.
Good Luck!
Hello, my growing friend! I'm downloading new photos and day comments every new day, so go back and see full last week diary right now!
---------------
New week starts.
🌞12.12.2022
My girls looks healthier then ever after I flushed them both with 'GHE Clean' solution and gave them 75% of nutrient's 'Pre flowering' doze. I hope this trend will last till the very end of this run. Flowering in progress!
I sprayed them with 'SeaWeed' as usual and that's all for today's treat.
🌞13.12.2022
Today I watered my babies with 75% of 'GHE' nutrients plus 'Advanced PK' in a half of recommended doze. Their leaves looking downwards after the lights was ON and i think it's because of poore watering cycle or it's overheating. I increased lamp to plant distance to 40cm. I'll try to water them more often from now.
I sprayed them with 'GHE Protect' solution to stimulate immune system and it's a last time i using this nutrient.
Upd: 10hrs after watering they looks fantastic. It was water deficit. Flowers developing and smell increased.
🌞14.12.2022
I think my ladies like PK complex i gave them yesturday. Plus 2cm per 24hrs. More stigmas. Healthier look.
Ph don't want to go down, it stays ~7 ignoring sulfur I putted in substrate two waterings ago.
'SeaWeed' spraying today and nothing more.
🌞15.12.2022
+1cm today.
I changed girls diet.
Now they'll take 'GHE SeaWeed' with water directly. Plus 'Advanced PK' in a 80% of recommended dose. Also I stopped giving them 'GHE Mineral Magic' and 'GHE Diamond Nectar'. They aren't necessery when flowering in progress. All other nutrients ('GHE Flora TriPart', 'GHE O.G.Bloom') - goes in amount of 75% from recommended doze. I don't want to overfeed my babies. Also, EC of solution is ~1.2 as well. PPM is 830. I think this are max numbers to reach.
They were good sprayed with 'GHE Protect' once more. I'll spray them with pure water from now.
Upd: Before watering all leaves are bent down (I watering my plants every 48hrs) and they are rising up in a couple hours after the procedure. I need to water them more often, but I have my job wich cause me to hold some steady watering periods. I'll wait some time more and then will shorten watering time to once per day graphic.
🌞16.12.2022
And again +1cm per 24hrs.
It's nothing planned for today, only clean water spraing.
Watering stays for tomorrow.
I turned ON my main ventilation with two charcoal filters. There is no signs of a smell now, but it's too noisy. It's like a car engine running near my bed all the time. Well, I need to sacrifice something to get good results...
I love how my BPPa#2 looks. It's big and bushy. Now You can clearly see it's future bud brunches and I'm really satisfied with it growth. #1 is much smaller and it forming not so much yields. There are signs of overfeeding on it's leaves and that's why it goes like this. I think #1 was too small when i started feed them bouth in a 'pre flowering' mode. #2 swallowed it, but #1 couldn't.
I think she'll made it, with slightly smaller size, but as delicious as #2 will be.
🌞17.12.2022
I fed my girls with a seme mixture without 'G.H.Bloom' since it is bloom activator. It was really hard, because I got ill yesturday and have 38° temperature. But feeding is feeding. And clean water spraying, of course.
Upd: +4cm per 36hrs (I forgot to do mesurments in the morning).
🌞18.12.2022
Nothing special today, only fresh water spraing.
+1cm per 12hrs (almost 2cm)
My BPPa#1 and #2 looks different. #2 already has violet colour in its stigmas nodes. #1 all white and it has smaller hight (20cm, and #2 has 28cm). It looks like different strain. I don't think it is so, but interested, why.
------------------------
Week ends.
Today after lights turned on I saw all leaves of my plants looking down.
I watered them one time in two days (day watering/day resting), the temperature wasn't too high (27°c max) but there was colder this night (near 17°).
Also, I added sulfur 2 days ago to low my ph.
Check this link for all the information about watering when growing inside coco coir. There are 5 articles about it that explain everything and really helped me starting to understand how to water and how measure and reading the values.
Here is the links:
https://www.cocoforcannabis.com/watering_coco/
Greetings, my growing friend! I'm downloading new photos and day comments every new day, so go back to see full last week diary right now!
---------------
New week starts.
🌞19.12.2022
+1cm per 24hrs.
Watering and water spraying today.
I changed nutrients composition to 'Flowering' x 75% and returned 'G.H.Bloom' to that formula (I was misinformed by subscription on its bottle. But now I've researched some GHE tables).
It's still hard for me to take care of my ladies, because three days ago I got illness and my body temperature doesn't want to fall. To make nutrient mix, to water my plants, to put the drenage out, to pre-made new water for futher watering, - it's still hard enough. I hope it wouldn't last too long...
About my flowers: they are big, especially #2, You can see it on photos I've pinned.
🌞20.12.2022
+3cm per 24hrs.
I think they like nev feeding formula!
Nothing special today, only clean water spraying.
The bud knots of my plants looks different. #1 is clear white and #2 becomes purple already. We'll see how their flowers will go.
🌞21.12.2022
+1cm per 24hrs.
Standard procedures today, nothing special. Watering and clean water spraying. #1 started to produce trichomes, #2 (larger and purple one) - is 'bald' still.
🌞22.12.2022
+2cm per 24hrs.
Nothing but clean water spraying today.
I bent my lamp and now it stands in a small angle to horizont. It should give more light to the smaller one #1. Also, I mounted temperature sensor on a upper bud level (it's seen on pinned photo).
🌞23.12.2022
Watering.
🌞24.12.2022
Nothing for today.
🌞25.12.2022
Watering and clean water spraying. #1 like this thing I did with my lamps position. It grew significantly and now it's allmost the same big as #2, but it's still white. I think I wouldn't see purple colours on it at all. #2 in opposite - becomes more purple day by day. I love how they looks.
------------------
Week ends.
I wish Marry Christmas to all of You, my friends. God bless You and Your families!
What is it?
I'm feeding my flowers with 75% amount of nutrients already (75% of recommended) and they showing me this...
Feeding:
- Flora TRIpart x 75%
- GHE 'SeaWeed' - 5ml/l
- O.G.Bloom - 0.2ml/l
- Advanced PK - 1ml/l
Please, help.
btw... I just did a bit of research on using sulfur and came up with an article that makes things pretty clear (at least to me)... it says, in part:
"Elemental sulfur and aluminum sulfate are the most common amendments used to decrease the soil pH. Elemental sulfur is the safest option to decrease soil pH; it is relatively inexpensive and available via local agriculture suppliers and garden centers. Unfortunately, it is slow to react. Elemental sulfur must go through two processes, a biological process and a chemical process, before soil pH is decreased. This often takes 3 to 6 months of warm soil temperatures when soil biology is active. Aluminum sulfate reacts in the soil very quickly as it must only undergo a chemical process. The change in pH happens within days or weeks. However, aluminum sulfate is not an ideal amendment because requires more material than elemental sulfur to reduce the soil pH and aluminum is toxic to plants."
Greetings, my growing friend! I'm downloading new photos and day comments every new day, so go back to see full last week diary right now!
---------------
New week starts.
🌞26.12.2022
Nothing to discribe, it's a rest day.
🌞27.12.2022
Watering with 'TriPart'x75%+'Advanced PK'. Spraying.
🌞28.12.2022
Nothing for today.
🌞29.12.2022
Watering with low amount of fertilisers. Spraying.
🌞30.12.2022
Today I came from another city (beeng there for 3 last days). Potassium deficiency is progressing. #2 looks good, yellow flesh is seen on it's old leaves only and no necrosis. #1 (white one) looks bad. It's new leaves are covered with necrosis (dead dry flesh between leaf veins). I can do nothing with it, because it's high ph issue. I can't make ph lower whatever I do. All I can is cut 'GHE Micro' amount in half and keep giving them 'Advanced PK' in a proper doze. It's near five weeks left to harvest and my thought - let it be what it will be.
🌞31.12.2022
I decided to not water my flowers today. I'll look to their leaves and maybe will water them tomorrow in the morning (evening for them).
Happy New Year to all of You. I wish everyone be healthy. I wish the War will end. I wish a New 2023 will be better then 22...
It was a really bad year, indeed.
🌞01.01.2023
Watering and spraying today.
I increased lamp to plant distance because it was too hot (29°c).
Potassium deficit in progress, old leaves turns yellow. I hope #2 wil go till the every end of its life cycle no metter what, because she looks better then #1 (yong leaves are more greenish) but I'm not shure about #1. Maybe I will forced to cut it earlier.
------------------
Week ends.
Greetings, my growing friend! I'm downloading new photos and day comments every new day, so go back to see full last week diary right now!
---------------
New week starts.
🌞02.01.2023
Nothing today. Literally nothing.
🌞03.01.2023
Watering and water spraying.
Bottom leaves turns yellow, I can't tell if this happening from potassium deficit or it's time for them to start colour change. It's my first auto flower grow.
🌞04.01.2023
Today is a rest day. I went to another city, so it will be less photos in this week album. Only those wich will my friend make when gardening.
🌞05.01.2023
Watering and spraying. I got photos of my babies and saw a good thing: necrosis stopped spreading. I'm really thankful to @GrowingGranny for helping with a wright girls diet. Now I believe they would stand till the end of their life cycle.
🌞06-07.01.2023
Nothing.
🌞08.01.2023
Watering. Light grooming yellow leaves on #2.
-------------------
Week ends.
New week starts
-----------------
🌞09.01.2023
Uper leaves slowly turns yellow, I think of potassium deficit in progress. I'll start to give them 'Ripen' from tomorrow. One week on 'Ripen' then one week of water and we're ready to go
🌞10.01.2023
First 'Ripen' watering today. They turns yellow, I can do nothing.
I started to smoke #1 bud by bud. It's already owesome.
🌞11.01.2023
Nothing today. Boring...
🌞12.01.2023
Watering with 'Ripen', waiting for yellow trichomes (0% till now). One more 'Ripen', I think, and I'll start 'cleaning' them.
🌞13.01.2023
Nothing to discribe.
🌞14.01.2023
Watering with 'Ripen'. No yellow trichomes yet. Budz become violet.
🌞15.01.2023
The rest day. Nothing.
------------------
Week ends.
New week starts.
--------------
🌞16.01.2023
Nothing today. Flowering goes on. Theres no yellow beads yet.
🌞17.01.2023
'Ripen'.
I made defoliation, but photos will be tomorrow /mistery/...
🌞18.01.2023
Yesturday I made defoliation, removed old and yellow leaves, and all leaves. :-)
Oh, this 'A-few-days-before-harwest' warries...
🌞22.01.2023
Watering with the 'Clean' solution. Yellow trichomes starts to shown up.
--------------
Week ends.
GR0WER
