White Widow Coco
VEG
120 Light Emitting Diodes/600W
120
VEG
60 Light Emitting Diodes/600W
60
FLO
120 Light Emitting Diodes/600W
120
FLO
60 Light Emitting Diodes/600W
60
Tent
120-240-200
120-240-200
Coco Coir
Custom
Perlite
Custom
Indoor
Room Type
Defoliation
weeks 10-12
FIMing
weeks 6, 11-12
Topping
weeks 3-4, 7-8, 10, 13
LST
weeks 4, 7-8, 10-13
15 liters
Pot Size
5 liters
Watering
Start at Harvest
G
Germination4y ago
Chupus The seed was soaked for 8 hours in a glass of water, then placed in a damp towel. After 1.5 days, the seed sprouted. I planted it directly into the soil in a large pot. I turned the lights on to 60%. Humidity is at 75%. Temperature is 24 degrees.
1 like
comments
Share
Used method
Paper Towel
Germination Method
1
Week 1. Vegetation4y ago
7 cm
Height
18 hrs
Light Schedule
24 °C
Day Air Temp
5.8
pH
No Smell
Smell
50 PPM
TDS
75 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
0.2 liters
Watering Volume
100 cm
Lamp Distance
Chupus Everything is great right now, I overwatered the coconut earlier, yesterday I had to dig up the little plant, squeeze out the coconut, and replant it. It looks good, so I guess I didn't damage anything. I'm keeping an eye on it.
1 like
comments
Share
2
Week 2. Vegetation4y ago
10 cm
Height
18 hrs
Light Schedule
26 °C
Day Air Temp
5.7
pH
No Smell
Smell
250 PPM
TDS
75 %
Air Humidity
24 °C
Night Air Temp
15 liters
Pot Size
0.4 liters
Watering Volume
120 cm
Lamp Distance
Nutrients 1
Hybrids
0.3 mll
Chupus I haven't had a very good experience with coconut in the past, but now I've started a few little ones in coconut because I think I have some good nutrients. I hope everything goes differently this time.
5 likes
2 comments
Share
3
Week 3. Vegetation4y ago
13 cm
Height
18 hrs
Light Schedule
24 °C
Day Air Temp
5.7
pH
No Smell
Smell
250 PPM
TDS
80 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
0.4 liters
Watering Volume
90 cm
Lamp Distance
Nutrients 1
Hybrids
0.3 mll
Chupus It's developing little by little, there's a delay because of the topping, I'm practicing this method for the first time. So far, everything is going great, I trimmed the central cola a bit and waited, two colas came out and I cut them into 4. I want to achieve 16 colas.
3 likes
1 comment
Share
Used techniques
Topping
Technique
4
Week 4. Vegetation4y ago
18 cm
Height
18 hrs
Light Schedule
24 °C
Day Air Temp
5.8
pH
No Smell
Smell
250 PPM
TDS
80 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
0.4 liters
Watering Volume
80 cm
Lamp Distance
Nutrients 1
Hybrids
0.3 mll
Chupus The plant is healthy and developing, today I stretched it more, tomorrow or the day after I will divide the stems again.
4 likes
comments
Share
Used techniques
LST
Technique
Topping
Technique
6
Week 6. Vegetation4y ago
30 cm
Height
18 hrs
Light Schedule
24 °C
Day Air Temp
6.2
pH
No Smell
Smell
800 PPM
TDS
80 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
0.5 liters
Watering Volume
60 cm
Lamp Distance
Nutrients 1
Hybrids
1 mll
Chupus The plant is healthy, I'm waiting for the buds to stretch and then I'll switch to light. I think a week or a week and a half will be enough for them. I'm feeding with 1 gram per liter.
2 likes
1 comment
Share
Used techniques
FIMing
Technique
7
Week 7. Vegetation4y ago
30 cm
Height
18 hrs
Light Schedule
24 °C
Day Air Temp
6.1
pH
No Smell
Smell
850 PPM
TDS
80 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
1 liters
Watering Volume
50 cm
Lamp Distance
Nutrients 3
TriPart Grow
1.8 mll
TriPart Micro
1.2 mll
TriPart Bloom
0.6 mll
Chupus The plants are growing vigorously, I'll be switching to flowering in a few days. I changed the nutrients from greenhouse feeding to GHE.
1 like
1 comment
Share
Used techniques
LST
Technique
Topping
Technique
8
Week 8. Vegetation4y ago
40 cm
Height
18 hrs
Light Schedule
24 °C
Day Air Temp
6.0
pH
Weak
Smell
1100 PPM
TDS
80 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
2 liters
Watering Volume
50 cm
Lamp Distance
Nutrients 3
TriPart Grow
1.8 mll
TriPart Micro
1.2 mll
TriPart Bloom
0.6 mll
Chupus I'm also adding Calmag 1 ml per liter. Today, before switching to flowering, I tied everything up and cleaned the leaves. In a week or a week and a half, I'll remove a bit more foliage.
5 likes
4 comments
Share
Used techniques
LST
Technique
Topping
Technique
10
Week 10. Flowering4y ago
40 cm
Height
12 hrs
Light Schedule
24 °C
Day Air Temp
6.5
pH
Normal
Smell
1300 PPM
TDS
60 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
4 liters
Watering Volume
50 cm
Lamp Distance
Nutrients 3
TriPart Grow
2 mll
TriPart Micro
2 mll
TriPart Bloom
1.5 mll
Chupus the plant looks healthy, yesterday I watered 4 liters until drainage, the ppm came out the same as it was poured, but the pH was poured at 6.5 and came out at 4.8. I don't understand what the problem is. today I also removed some leaves and a few shoots
1 like
8 comments
Share
Used techniques
LST
Technique
Topping
Technique
Defoliation
Technique
11
Week 11. Flowering4y ago
45 cm
Height
12 hrs
Light Schedule
24 °C
Day Air Temp
6.7
pH
Normal
Smell
850 PPM
TDS
60 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
4 liters
Watering Volume
40 cm
Lamp Distance
Nutrients 4
cal mag
0.5 mll
TriPart Grow
1.6 mll
TriPart Micro
1.6 mll
Chupus The plant looks healthy, no problems at all, but when I water with pH 6.5-6.7, I get 4.8 at the drainage output. I don't understand what's going on. Either it's salt buildup or too many ppm. I've now reduced the fertilizer dose.
4 likes
5 comments
Share
Used techniques
LST
Technique
FIMing
Technique
Defoliation
Technique
12
Week 12. Flowering4y ago
45 cm
Height
12 hrs
Light Schedule
24 °C
Day Air Temp
6.6
pH
Normal
Smell
1350 PPM
TDS
60 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
4 liters
Watering Volume
40 cm
Lamp Distance
Nutrients 4
cal mag
1.2 mll
TriPart Grow
0.8 mll
TriPart Micro
1.6 mll
Chupus I don't understand anything, I pour in pH 6.6-6.7 and it still comes out pH 4.8 and doesn't rise, the PPM stays the same, whatever I poured in is what comes out, how it's growing and looks is a 5+
Secret. I started giving more CalMag compared to previous waterings, I'm already on my second watering and nothing is changing. I'm afraid to flush because I had such an experience a long time ago and it made things worse for the plant.
likes
comments
Share
Used techniques
LST
Technique
FIMing
Technique
Defoliation
Technique
13
Week 13. Flowering4y ago
45 cm
Height
12 hrs
Light Schedule
24 °C
Day Air Temp
6.6
pH
Normal
Smell
1100 PPM
TDS
60 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
5 liters
Watering Volume
40 cm
Lamp Distance
Nutrients 4
TriPart Grow
0.6 mll
TriPart Micro
1.4 mll
TriPart Bloom
2 mll
Chupus The plant looks just awesome considering I'm pouring in 6.6 pH, and the output is 4.4. I still don't understand how it's developing. I'm pouring in CalMag normally, it seems, next time I'll increase the dosage to 2 mg per liter. And I'll lower the ppm to 600-700. This time I poured in 1100 and it came out to 1400.
2 likes
1 comment
Share
Used techniques
LST
Technique
Topping
Technique
14
Week 14. Flowering4y ago
45 cm
Height
12 hrs
Light Schedule
25 °C
Day Air Temp
6.6
pH
Strong
Smell
800 PPM
TDS
60 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
5 liters
Watering Volume
40 cm
Lamp Distance
Nutrients 4
TriPart Grow
0.3 mll
TriPart Micro
0.5 mll
TriPart Bloom
1 mll
Chupus gaining weight, looks super, although the yield is about 4.7
4 likes
comments
Share
15
Week 15. Flowering4y ago
45 cm
Height
12 hrs
Light Schedule
25 °C
Day Air Temp
6.6
pH
Strong
Smell
800 PPM
TDS
60 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
5 liters
Watering Volume
40 cm
Lamp Distance
Nutrients 4
TriPart Grow
0.3 mll
TriPart Micro
0.5 mll
TriPart Bloom
1 mll
Chupus I poured 2ml of three-amizer per liter. Everything looks great!
4 likes
3 comments
Share
16
Week 16. Flowering3y ago
45 cm
Height
12 hrs
Light Schedule
25 °C
Day Air Temp
6.6
pH
Strong
Smell
700 PPM
TDS
70 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
5 liters
Watering Volume
40 cm
Lamp Distance
Nutrients 4
TriPart Grow
0.3 mll
TriPart Micro
0.5 mll
TriPart Bloom
1 mll
Chupus Right now, I'm having humidity issues, the air conditioner is acting up. Humidity is around 70-80 percent. I put in more fans to prevent mold from starting, and even though the output is still pH 4.7, the plant looks healthy. I'll start pouring in the ripen soon.
2 likes
comments
Share
17
Week 17. Flowering3y ago
45 cm
Height
12 hrs
Light Schedule
25 °C
Day Air Temp
6.5
pH
Strong
Smell
800 PPM
TDS
70 %
Air Humidity
23 °C
Night Air Temp
15 liters
Pot Size
5 liters
Watering Volume
40 cm
Lamp Distance
Nutrients 1
FinalPart
3 mll
Chupus this little plant suffered due to the move and I had to cut off a few tops because of some mold(
2 likes
comments
Share
17
Week 17. Harvest3y ago
Happy Harvest Day!
10/10
Rated
like my other plants on coconut, all suffered from salting, but nevertheless, they all looked super. this widow is just top-notch. the only thing is that due to the humidity, it rotted a bit, while the other plants at the same stage that were in the same box did not rot. I'm very pleased with the bush, it's aromatic and resinous.
Show more
Original
Spent 107 days
Ger Veg Flo Har
1049 g
Bud wet weight per plant
127 g
Bud dry weight per plant
1
Plants
0.3 m²
Grow Room size
Easy
Difficulty
Hungry, Relaxed, Sleepy
Positive effects
Dry mouth
Negative effects
Pine
Taste
Height
Day air temperature
Air humidity
PPM
PH
Light schedule
Night air temperature
Pot size
Lamp distance
Chupus The whole period was great, except for the issues with the pH, but in the end, I see a good result.
3 likes
3 comments
Share
Equipment Reviews
29 comments
Sort by
popularity
popularity
newest
oldest
420DeepGrow commentedweek 84y ago
It's taking good shape, keep it up.... good luck bro
likes 3
Chupus commented4y ago
@420DeepGrow, thank you 👌
like 1
OranGoodAng commentedweek 134y ago
Yeah, everything's fine, don't overdo it with the CalMag either. 1-1.5 is enough. But if you want to lower the dosage, 1100 is a bit much. 600-700 is normal, you can go up to 800 if you're using CalMag. But for now, yeah, let it eat a bit, keep it lower👌
As for the pH, just forget about it, don't stress too much. The plant is healthy👌
likes 2
TheFattyMcCoy commentedweek 114y ago
Looking good! Larger pot size will help with that pH buffering
Still looking great brotha!
❤️
likes 2
GODSGIFT_2005 commentedweek 64y ago
Nice progress bro 👍
likes 2
GreenGlowes commentedweek 34y ago
Good luck with your gro! 😎
likes 2
GODSGIFT_2005 commentedweek 24y ago
Best wishes 👍
likes 2
OranGoodAng commentedweek 114y ago
Yesss. You're using way too little CalMag. 0.5/l is nothing. Use 1.5, at least 1 (if you're worried). You won't ruin it with CalMag, don't be afraid.
like 1
OranGoodAng commented4y ago
@Chupus, Water it well, it won't hurt. And in general, don't be stingy with watering, you need to wash out the excess salts gradually. The ppm seems fine, so it's probably not dropping due to salt buildup. It looks good, so don't stress too much👌
Again, you're using coco - you really can't overwater it, just relax. You can overwater in soil or with a really bad coco (like your perlite - that's just not possible). I don't even use perlite in coco - it's just not needed there. I always water with runoff, even during the germination stage - they don't care. The thing is, I water before planting and then don't water for about a week))) Right now I have a small one - watering once a day, about 2 liters. About 0.5 liters going in. So around 25% coming out.
likes
Chupus commented4y ago
@OranGoodAng, I disagree about the coconut, it must be very different, mine is small like sawdust. When I planted the seedling, I buffered the coconut and left it like that, then I planted it in there. The seedlings rotted because it holds moisture like crazy. I lost 2-3 seeds, then I took the same pot, pulled out the coconut fiber, squeezed it by hand, and planted in it, and now they’ve grown.
likes
OranGoodAng commented4y ago
@Chupus, wow! This is the first time I've heard this! Sounds really bad, probably coconut.
likes
Show More (5)
OranGoodAng commentedweek 154y ago
So beautiful!!! The bud is just growing fat)))
like 1
Chupus commented3y ago
@OranGoodAng, hey, it's growing fat, but the pH is 4.7, I can't understand how it's growing, and all four pots on coco have outputs of 4.6-5.2 and they all look fire)) also, the AC is acting up and the humidity has been at 70 percent for a week now, I'm waiting for the freon to be delivered so I can recharge the AC myself) overall, these plants are tough!
likes
OranGoodAng commented3y ago
@Chupus, Well yeah, at this stage 70% is a bit much. But I always have this issue - the box is small, not enough ventilation. So far, knock on wood)) Good luck!
like 1
pisya commentedweek 173y ago
Well, does it really knock you out?
like 1
Chupus commented3y ago
@pisya, yes, it really plants well in the chair.
likes
DeepWaterGrower commentedweek 173y ago
Nice strain, I I'll try it
like 1
OranGoodAng commentedweek 74y ago
GHE is the same thing. The nutrients are decent, but there's not enough calcium and magnesium for coco. Because of this, there are a lot of issues with pH and rising PPM.
like 1
OranGoodAng commentedweek 84y ago
Oh, what a cool topic!!! ))) Beautifully stretched 👌
like 1
OranGoodAng commentedweek 104y ago
Regarding the dropping pH - I've always had this issue with non-special fertilizers, but I was out of Calmag, so I can't say for sure. Try adding a bit more Calmag (but I don't claim to have the truth).
like 1
Seed2WeedYT commentedweek 114y ago
Keep up the good work, Happy Growing 💪
like 1
OranGoodAng commentedweek 24y ago
Feedings aren't great for coconut; there won't be enough calcium. It's better to use specialized coconut feeds, and then there won't be any troubles. If needed, add CalMag and everything will be fine.
likes
Chupus commented4y ago
@OranGoodAng, I live in Vietnam and I have a problem with nutrients. I ordered GHE from Russia and also Green House Feeding Hybrid. I’m using GHE in coco and Feeding in soil. Anyway, I realized I need to use more CalMag.
likes
OranGoodAng commented4y ago
@Chupus, got it, bro! Good luck with what you have! I think everything will be fine. Feedings for soil - all good! GH is cool too, by the way.
likes
the end.
Enjoying this diary? Follow for more updates!
Prefer the old Diary view?
Go back to the old Diary view