#1 Fast flower by fastbuds.

Week 1 Light settings 18/6 on at 6.00am of 0.00am Light power= 25% 60w Radiator settings LIghts on Turn on if temp drops below 21c Turn off if temp goes above 21.5c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19.5c Humidifier settings LIghts on Turn on if humidity drops below 60% Turn off if humidity goes above 60.5% LIghts off Turn on if humidity drops below 54% Turn off if humidity goes above 54.5% Extractor settings temperature 26c with 1c steps Humidity 70% with 2% steps Max speed 8 Min speed 1 Wednesday 25/1/23 Day 1 5pm #1 Water 0.1L Ec=0.225 ph=6.8 Filled humidifier. 6.45pm #1 Height= 4CM. Dist= 78CM. DLI=7.5 Lowered light 5cm and increased power to 37% =89w Height= 4CM Dist= 73CM DLI=11.8 Thursday 26/1/23 Day 2 #1 Height=5CM Dist=72CM DLI=12.0 Friday 27/1/23 Day 3 1.00pm Got new bluelab Ph pen put in cleaning liquid. #1 Feed 0.5L Ec 0.286 Ph=6.4 No runoff Turn pots 90deg. Saturday 28/1/23 Day 4 1.00pm Calibrated New bluelab Ph pen. Cleaned my older good ph pen then recalibrated. Threw away the new kaizen cheap Ph pen in disgust. 8.00pm Humidifier half full or half empty depending on your perspective. #1 Height=6CM Dist=71CM DLI=12.2 9.30pm Altered parameters for triggers to be within 0.1c and 0.1% Sunday 29/1/23 Day 5 3.00pm Both ph pens are reading correctly. #1 Feed 0.75L Ec 0.250 Ph=6.0 5.50pm Extractor settings temperature 26c with 1c steps Humidity 68% with 2% steps Max speed 8 Min speed 1 10.15pm Humidifier settings LIghts on Turn on if humidity drops below 58% Turn off if humidity goes above 62% LIghts off Turn on if humidity drops below 50% Turn off if humidity goes above 54% Monday 30/1/23 Day 6 Nothing. Tuesday 31/1/23 Day 7 9.15pm #1 Height=7CM Dist=71CM DLI=12.1 Increased light power to 42% =101w #1 new DLI=14.0 Round up for the week. All above information is for me to remember what I did. The 1st week has been OK. I have managed to keep the VPD in check throughout the week with the aim of keeping it between 0.4 and 0.8 I remembered the WiFi sensor doesn't constantly communicate with the app mid way through the week so managed to dial things in closer to the end of the week. How the sensor works is when the temp moves 0.5c from its last sent reading it then transmits the new reading or if RH moves 5% since last sent reading. The DLI was a little on the low side for the week as 2 strains stretched and toppled over, should have had it set to 12Dli. #1 Wedding Cheesecake FF has done great this week, she is on to her 2nd set of true leaves. Even though this one had slightly less light then the other strains she has not stretched and toppled like the others. She is where I would expect her to be at this stage in life and looking good. Power used for week Light (1.23+1.61+1.61+1.61+1.60+1.60+1.64)=10.9Kw Extractor (0.05+0.05+0.05+0.05+0.05+0.5+0.5) =0.35Kw Fans (0.32+0.33+0.33+0.33+0.33+0.33+0.33)=2.3Kw Humid (0.08+0.13+0.17+0.07+0.13+0.07+0.12)=0.77Kw Radiator (0.93+0.81+1.18+0.9+1.16+0.84+0.68) =6.5Kw Total for the week=20.82Kw Back in a week. Thanks for stopping by.