SeedSupreme Runtz Auto

*First feeding last week was 1/4 recommend* THIS WEEK: *TARGETS* RH - 65%, +/- 5% offset (No automations set, statistical only) Temp - 75F (max low 70, max high 79) VPD - 0.9-1.3kPa, controlled by automation. (Dehumidifier turns on at 0.9 or below and turns off at 1.3kPa.) *WATERINGS/FEEDINGS* First watering (day 16): 1/2 gallon water until 5% run off. PH 6.5. Second watering (day 18): 1/2 gallon water and Fox Farm Big Bloom mixed at 6tsp/gal ratio until 5% run off. PH 6.5. *ADDITIONAL NOTES* Dehumidifier FINALLY came and got it in the tent Saturday night (day 20). Humidity target numbers were not great this week as a result, but were in range 90% of the time since adding the dehumidifier. Made a change to humidity and temperature settings. This week was temp range 70-79F, target temp 75%. Heat turns on at or below 70F, AC turns on at or below 79F. Both turn off at 75F. Target humidity was 65%, with the range being 60-70%. This was only for reporting purposes, I have been controlling humidity by following VPD ranges for my set temperature range. VPD target range is 0.9-1.3kPa. Past data has shown when VPD goes down it's because humidity goes up when the temperature goes down. My plan this week has been not letting the temperature go below 70F or above 79F in the room the grow tent is in and turning on the dehumidifier when VPD in the tent gets below the target range. The environment around the grow tent sits around 70% RH, so raising the humidity is easy if needed, but usually it's not. I have an intake Fan to install so I may move the dehumidifier out of the tent and into this room, depending on how well I can get the tent conditions to match the external room. The dehumidifier has raised the temperature slightly in the tent, but not enough to be alarming, only 2 or 3 degrees max. AC is in the external room and the tent is usually with 3 degrees of the room. Tent is currently venting out into this room, AC vents outside. We'll be changing the tent to venting outside in the coming days.