Likes
Comments
Share
Good growth leaves nice an perky getting their first veg feed this week spider farmer runs pretty warm at 100 percent bt with the carbon filter dragging heat away from above the tent stays a toasty 80 I'll need to cool a tad for flowering bt for now it's perfect
Processing
Likes
93
Share
@Ferenc
Follow
Let's see how it goes. I raised up the water so it is now 150ml 2x per plant so 300 per plant per day. The same with fertilization and the same days remain. I keep 14 hours darkness and 10 hours light schedule for Purple Punch obviously I take out from the tent and put separately. I can't wait to harvest the Gelato Cookie D'ohpe so I can use the tent for the Purple Punch. I give 18 hours light on so 12 hours on 4 hours off and 6 hours on 2 hours off. Basically, it was the only solution because I put the Purple Punch in at 23:00 o clock and take out at 9 am. So the light on from 23:00 to 11 am and then 15:00-21:00 and off from 21:00 to 23:00. It was the only good way based on my timeline working hours and school. I also see the first signs of flowering after 7 days of light schedule change of the Purple Punch. Hope it goes well. They have a totally different smell, both strong, but the Gelato Cookie D'ohpe is like sweet and aromatic, and also like a muck heap 🤐😅👻The Purple Punch has strong smell but not sweet more like citrus. Saturday: I always had some yellow fan leaves but now it is getting more on the Gelato Cookie D'ohpe. Hopefully, it causes the flowering stage because the plant wants to use the energy for buds making and takes out of the leaves, so it is a natural process. I read that it means the plant is on the halfway of the flower. Hope the best. Tuesday: Purple Punch does well flowering, and the Gelato Cookie D'ohpe I think one more week so I will start flushing from tomorrow. I have checked the trichomes, they are cloudy, milky and the pistils started getting brown also so soon it will be done. The fan leaves also getting yellow as it can be seen so I think the next is the final week, if not then no more than 2 weeks and it is done. I can't really wait... End of this week Gelato Cookie D'ohpe is 70cm and the Purple Punch is 40 cm.
Likes
6
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D64/B27 - 18/06/24 ⚗️ EC: 1.0 pH: 5.2 🌡️ T: 26°C H: 80% 🌊 FLUSH 🍗 💧 💼 FLUSH first day 🧠 🚀 🎬 1 TL video ______________ 📅 D65/B28 - 19/06/24 ⚗️ EC: 0.2 pH: 7 🌡️ T: 26°C H: 80% 🌊 FLUSH 🍗 💧 💼 FLUSH second day 🧠 🚀 🎬 1 TL video ______________ 📅 D66/B29 - 20/06/24 ⚗️ EC: 1 pH: 6.2 🌡️ T: 26°C H: 80% 🌊 15 L 🍗 CalMag - Bloom A-B - Bud Candy - B52 - Overdrive 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D67/B30 - 21/06/24 ⚗️ EC: 1 pH: 6 🌡️ T: 26°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D68/B31 - 22/06/24 ⚗️ EC: 1 pH: 6 🌡️ T: 26°C H: 70% 🌊 15 L 🍗 CalMag - Bloom A-B - Bud Candy - B52 - Overdrive 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D69/B32 - 23/06/24 ⚗️ EC: 1 pH: 6 🌡️ T: 26°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D70/B33 - 24/06/24 ⚗️ EC: 1 pH: 6 🌡️ T: 26°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video
Likes
2
Share
@valiotoro
Follow
A wonderful genetic thank you Dutch Passion❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin & the smell ABSOLUTELY out of this world!
Likes
6
Share
Likes
18
Share
Sorry I havnt updated this diary in a couple weeks. I recently had a son and have been so busy. Anyways, this girl has really taken off. When I open my grow room it makes my whole house stink. Right now it's a very sweet skunky scent. She has filled out greatly and for a cbd strain I'm very excited about her resin production. Lately she has been getting a lot of water, slf100, em1, urb, fpj and a little bit of herculean harvest to supplement phosphorus. I havnt made any teas just in case, I didn't want to mess anything up late into flower. Make sure to follow me on Instagram to see more updates.
Likes
11
Share
@PanGrower
Follow
Do not pay attention to the temperature on the thermometer in the middle, it lies by a couple of degrees. I have a good thermometer on top of the box that shows the temperature. Day 29: After a terrible fracture, we see that the plant is beginning to recover. I'm honestly disappointed because it makes it very difficult for me to train mainlining and it will also increase the amount of time it takes to grow. Day 30: It looks much better already, I could superprune the right branch, but I don't want to stress it. I will try to bend the right branch harder, I will bend the left one a little in the morning the next day, maybe early. Day 31: This morning I cut the lower leaves, photo in the evening and continued the LST training after the injury. Photo in the evening. Day 32: I am completely sure that the plant has moved away from the stress, but we can see on the left circle, the right bud (and side) slowed growth. Day 34: I saw traces of salt on the tips of the new leaves, so now I pour water with regular 15 PPM.
Likes
199
Share
Start of week 2 🌱🍁 Unfortunately some poor advice led to a nutrient overload. 350-400 ppm is far to much for a seedling so back to 150 for a other week until I start adding tarantula. Maybe other strains can handle it but the peyote didnt like it. See you in a couple of days 🌱🍁❤️ Watermelon zkittlez autos looking good. Just want them done now so I can give the photo periods some decent light and space
Likes
13
Share
Week 2 of flower, RO water change with an EC of 1.3. Will adjust from here and observe the next day or two. Although you watched as I did a major defoliation, as you can see, they have bounced back pretty quickly. As of now, I will be defoliating every few days just to keep the light penetrating the canopy so we have some nice buds come harvest time. Will be back to update in a few days to update where they are at and if they need more nutrients. pH is set and stable. Stay tuned until the next update and follow my YouTube and Instagram (Link on growdiaries profile)
Likes
34
Share
@rhodes68
Follow
12/27 Week 8 ! Such lovely girls, prettiest plants we've grown to date. Pretty happy with the nuets where they are so leaving it at 850ish ppm Was continuing to occasionally throw in some Fish Sh!T but that will stop now,too close so gotta watch those terps. Lights out pics later 12/28 Last two weeks before the flush so began the Soul Peak PK/Finisher at minimum dose with regular feed. Adds almost nothing to ppm. 12/31 Last push , reduced Bloom nuets to 7ml and increased Peak to 13 which is a tad high but ppm remains under 800. Eventually it will be all Peak then flush. 1/2 Flush for Belle begins with Monday's watering at lights on. Last day for Bloom nuets on Belle and then three days of just the finisher. Annie will stay on the 5ml/15ml mix until her hairs curl sufficiently then same protocol.
Likes
5
Share
dec 12. megacrop 1.06gr/litre ph'ed at 6.35. about 500 ml dec 14. megacrop 1.06gr/litre ph'ed at 6.35. about 500 ml dec 16. megacrop 1.19gr/litre ph'ed at 6.38. about 500 ml (increased nutrients to 1.19) dec 18. megacrop 1.19gr/litre ph'ed at 6.38. about 500 ml
Likes
20
Share
Really enjoyed growing this strain , she has very nice taste like fruits🍍and candy 🍬 and a hint of gas ⛽️ hard hitting too
Processing
Likes
4
Share
@Reaper
Follow
The pictures and video are the start from week 2 flowering, the light is an apollo 10 full spectrum, plants vegged for only 3 weeks. if i veg longer i feel its a waste of time because the buds are very small inside the plants where the light cant reach. purple haze got defoliated during week 2 of flowering (the last 3pictures)
Likes
13
Share
@RFarm21
Follow
Week 27 december - 2 January Happy new year!
Likes
16
Share
@Naujas
Follow
The first week of flowering went smoothly:) The girl looks beautiful and healthy :) good luck to everyone.:)
Likes
13
Share
Removed the 2 Xs 1500's (300watts) & replaced them with 2 P1000 (200watts) lights, now running 680 watts. These lights fit in better & have air space all around to help cool them, these lights run a lot cooler than the xs 1500s & only get warm not hot. Started some clones.